lkml.org 
[lkml]   [2005]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[Patch 2/3] framebuffer driver for MQ11xx graphics chip
Date

This patch adds a framebuffer driver for MQ11xx system-on-chip
graphics chip. This chip is used in several non-PCI ARM and MIPS
platforms such as the iPAQ H5550. This driver depends on the overall
platform_device driver for the chip.


Signed-off-by: Jamey Hicks <jamey@handhelds.org>
Signed-off-by: Andrew Zabolotny <anpaza@mail.ru>

---
commit d6631d9e21df12578ae5e7a2878b7e7132cfa28c
tree 76cce5a7824b24b384451e1100df26cecd45691e
parent d1144b4da9a00634c14dfed3a56f8491749b9f01
author <jamey@lspace.crl.dec.com> Tue, 02 Aug 2005 11:26:23 -0400
committer <jamey@lspace.crl.dec.com> Tue, 02 Aug 2005 11:26:23 -0400

drivers/video/Kconfig | 17 ++
drivers/video/Makefile | 1
drivers/video/mq1100fb.c | 497 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 515 insertions(+), 0 deletions(-)

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1438,6 +1438,23 @@ config FB_PXA

If unsure, say N.

+config FB_MQ1100
+ tristate "MQ1100/32/68/78/88 framebuffer support"
+ depends on FB && PLATFORM_MQ11XX
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_SOFT_CURSOR
+ help
+ This is a framebuffer device for the MediaQ 1100/32/68/78/88
+ LCD controllers (http://www.mediaq.com) found in some PDAs
+ (these include: iPAQ 5400, Axim X5, iPAQ 221x).
+
+ This driver handles only the LCD controller apect of the MediaQ;
+ other functions are handled in respective drivers.
+ See <http://www.linux-fbdev.org/> for information
+ on framebuffer devices.
+
config FB_W100
tristate "W100 frame buffer support"
depends on FB && PXA_SHARPSL
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -83,6 +83,7 @@ obj-$(CONFIG_FB_GBE) += gbe
obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o
obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o
obj-$(CONFIG_FB_PXA) += pxafb.o
+obj-$(CONFIG_FB_MQ1100) += mq1100fb.o
obj-$(CONFIG_FB_W100) += w100fb.o
obj-$(CONFIG_FB_AU1100) += au1100fb.o fbgen.o
obj-$(CONFIG_FB_PMAG_AA) += pmag-aa-fb.o
diff --git a/drivers/video/mq1100fb.c b/drivers/video/mq1100fb.c
new file mode 100644
--- /dev/null
+++ b/drivers/video/mq1100fb.c
@@ -0,0 +1,497 @@
+/*
+ * linux/drivers/mq1100fb.c
+ *
+ * Copyright © 2003 Keith Packard
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * MediaQ 1100/32/68/78/88 LCD Controller Frame Buffer Driver
+ *
+ * Please direct your questions and comments on this driver to the following
+ * email address:
+ *
+ * keithp@keithp.com
+ *
+ * ChangeLog
+ *
+ * 2003-12-06: Andrew Zabolotny <zap@homelink.ru>
+ * - Modified to use the MediaQ SoC base driver to allow
+ * sharing of other MediaQ subdevices with other drivers.
+ * 2003-05-18: <keithp@keithp.com>
+ * - Ported from PCI development board to ARM H5400
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/notifier.h>
+#include <../drivers/platform/mq11xx.h>
+
+#if 0
+# define debug(s, args...) printk (KERN_INFO s, ##args)
+#else
+# define debug(s, args...)
+#endif
+#define debug_func(s, args...) debug ("%s: " s, __FUNCTION__, ##args)
+
+#define MQ_Rotate_0 1
+#define MQ_Rotate_90 2
+#define MQ_Rotate_180 4
+#define MQ_Rotate_270 8
+
+#define MQ_Reflect_X 16
+#define MQ_Reflect_Y 32
+
+struct mq1100fb_rgb {
+ unsigned char red,green,blue,transp;
+};
+
+struct mq1100fb_info {
+ /* Framebuffer info */
+ struct fb_info fb;
+ /* The link to the base SoC driver */
+ struct mediaq11xx_base *base;
+ /* The RGB palette */
+ struct mq1100fb_rgb palette[256];
+ /* Notifier block */
+ struct notifier_block notify;
+ /* Framebuffer offset inside MediaQ RAM */
+ u32 fb_addr, fb_size;
+ /* The pseudo-palette */
+ u32 pseudo_pal[16];
+ /* Device instance number (0-7) */
+ u8 inst;
+ /* Combination of MQ_Rotate_XXX bits */
+ u8 rotation;
+ /* 1 if device is active, 0 if poweroff */
+ unsigned active:1;
+ /* 1 if initialization is complete, 0 while it is deferred */
+ unsigned initcomplete:1;
+ /* 1 if power is enabled to the MEDIAQ_11XX_FB_DEVICE_ID subdevice */
+ unsigned poweron:1;
+};
+#define to_mq1100fb_info(n) container_of(n, struct mq1100fb_info, fb)
+
+#define MAX_MQFB_INSTANCES 8
+
+static int ppm [MAX_MQFB_INSTANCES];
+MODULE_PARM(ppm, "i");
+MODULE_PARM_DESC(ppm, "LCD pixel density in pixels per meter");
+
+/* ------------------- chipset specific functions -------------------------- */
+
+static void mq1100fb_power (struct mq1100fb_info *info, int val)
+{
+ debug_func ("val:%d\n", val);
+
+ info->active = (val == 0) ? 1 : 0;
+
+ if (info->active != info->poweron) {
+ info->poweron = info->active;
+ info->base->set_power (info->base, MEDIAQ_11XX_FB_DEVICE_ID,
+ info->active);
+ }
+}
+
+static void mq1100fb_update_screeninfo (struct mq1100fb_info *info, int ppm)
+{
+ u32 control = info->base->regs->GC.control;
+ u32 horizontal_width = info->base->regs->GC.horizontal_window;
+ u32 vertical_height = info->base->regs->GC.vertical_window;
+ u32 window_stride = info->base->regs->GC.window_stride;
+ int stride;
+
+ debug_func ("ppm:%d\n", ppm);
+
+ info->fb.var.grayscale = 0;
+
+ switch (control & MQ_GC_DEPTH) {
+ case MQ_GC_DEPTH_PSEUDO_1:
+ info->fb.var.bits_per_pixel = 1;
+ info->fb.fix.visual = FB_VISUAL_MONO01;
+ break;
+ case MQ_GC_DEPTH_PSEUDO_2:
+ info->fb.var.bits_per_pixel = 2;
+ info->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
+ break;
+ case MQ_GC_DEPTH_PSEUDO_4:
+ info->fb.var.bits_per_pixel = 4;
+ info->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
+ break;
+ case MQ_GC_DEPTH_PSEUDO_8:
+ info->fb.var.bits_per_pixel = 8;
+ info->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
+ break;
+ case MQ_GC_DEPTH_GRAY_1:
+ info->fb.var.bits_per_pixel = 1;
+ info->fb.var.grayscale = 1;
+ info->fb.fix.visual = FB_VISUAL_MONO01;
+ break;
+ case MQ_GC_DEPTH_GRAY_2:
+ info->fb.var.bits_per_pixel = 2;
+ info->fb.var.grayscale = 1;
+ info->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
+ break;
+ case MQ_GC_DEPTH_GRAY_4:
+ info->fb.var.bits_per_pixel = 4;
+ info->fb.var.grayscale = 1;
+ info->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
+ break;
+ case MQ_GC_DEPTH_GRAY_8:
+ info->fb.var.bits_per_pixel = 8;
+ info->fb.var.grayscale = 1;
+ info->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
+ break;
+ case MQ_GC_DEPTH_TRUE_16:
+ info->fb.var.bits_per_pixel = 16;
+ info->fb.fix.visual = FB_VISUAL_TRUECOLOR;
+ break;
+ }
+
+ info->fb.var.xres = info->fb.var.xres_virtual =
+ ((horizontal_width & MQ_GC_HORIZONTAL_WINDOW_WIDTH) >> 16) + 1;
+ info->fb.var.yres = info->fb.var.yres_virtual =
+ ((vertical_height & MQ_GC_VERTICAL_WINDOW_HEIGHT) >> 16) + 1;
+ stride = (short)window_stride;
+ info->fb.fix.line_length = (stride < 0) ? -stride : stride;
+
+ switch (control & (MQ_GC_X_SCANNING_DIRECTION|MQ_GC_LINE_SCANNING_DIRECTION)) {
+ case 0:
+ if (stride >= 0)
+ info->rotation = MQ_Rotate_0; /* 000 */
+ else
+ info->rotation |= MQ_Rotate_0 | MQ_Reflect_Y; /* 010 */
+ break;
+ case MQ_GC_X_SCANNING_DIRECTION:
+ if (stride >= 0)
+ info->rotation = MQ_Rotate_0 | MQ_Reflect_X; /* 001 */
+ else
+ info->rotation = MQ_Rotate_180; /* 011 */
+ break;
+ case MQ_GC_LINE_SCANNING_DIRECTION:
+ if (stride >= 0)
+ info->rotation = MQ_Rotate_90 | MQ_Reflect_X; /* 100 */
+ else
+ info->rotation = MQ_Rotate_90; /* 110 */
+ break;
+ case MQ_GC_LINE_SCANNING_DIRECTION|MQ_GC_X_SCANNING_DIRECTION:
+ if (stride >= 0)
+ info->rotation = MQ_Rotate_270; /* 101 */
+ else
+ info->rotation = MQ_Rotate_270 | MQ_Reflect_X; /* 111 */
+ break;
+ }
+
+ info->fb.var.width = info->fb.var.xres * 1000 / ppm;
+ info->fb.var.height = info->fb.var.yres * 1000 / ppm;
+}
+
+/*
+ * mq1100fb_check_var():
+ * Round up in the following order: bits_per_pixel, xres,
+ * yres, xres_virtual, yres_virtual, xoffset, yoffset, grayscale,
+ * bitfields, horizontal timing, vertical timing.
+ */
+static int mq1100fb_check_var(struct fb_var_screeninfo *var,
+ struct fb_info *fbinfo)
+{
+ debug_func ("\n");
+
+ switch (var->bits_per_pixel) {
+ case 8:
+ var->red.offset = 0;
+ var->green.offset = 0;
+ var->blue.offset = 0;
+ var->red.length = 6;
+ var->green.length = 6;
+ var->blue.length = 6;
+ break;
+ case 16:
+ var->red.offset = 11;
+ var->green.offset = 5;
+ var->blue.offset = 0;
+ var->red.length = 5;
+ var->green.length = 6;
+ var->blue.length = 5;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int mq1100fb_set_par(struct fb_info *fbinfo)
+{
+ struct mq1100fb_info *info = to_mq1100fb_info(fbinfo);
+
+ debug_func ("\n");
+
+ if (!info->active)
+ /* Enable the LCD controller */
+ mq1100fb_power (info, 0);
+
+ return 0;
+}
+
+static int mq1100fb_setcolreg(unsigned regno, unsigned red, unsigned green,
+ unsigned blue, unsigned transp,
+ struct fb_info *fbinfo)
+{
+ struct mq1100fb_info *info = to_mq1100fb_info(fbinfo);
+ int bpp, m = 0;
+
+ debug_func ("color:%d rgba:%d/%d/%d/%d\n",
+ regno, red>>8, green>>8, blue>>8, transp>>8);
+
+ bpp = info->fb.var.bits_per_pixel;
+ m = (bpp <= 8) ? (1 << bpp) : 256;
+ if (regno >= m) {
+ debug ("regno %d out of range (max %d)\n", regno, m);
+ return -EINVAL;
+ }
+
+ info->palette[regno].red = red;
+ info->palette[regno].green = green;
+ info->palette[regno].blue = blue;
+ info->palette[regno].transp = transp;
+
+ switch (bpp) {
+ case 8:
+ break;
+ case 16:
+ /* RGB 565 */
+ info->pseudo_pal[regno] = ((red & 0xF800) |
+ ((green & 0xFC00) >> 5) |
+ ((blue & 0xF800) >> 11));
+ break;
+ }
+
+ return 0;
+}
+
+static int mq1100fb_pan_display(struct fb_var_screeninfo *var,
+ struct fb_info *fbinfo)
+{
+ debug_func ("\n");
+ /*
+ * Pan (or wrap, depending on the `vmode' field) the display using the
+ * `xoffset' and `yoffset' fields of the `var' structure.
+ * If the values don't fit, return -EINVAL.
+ */
+
+ /* ... */
+ return 0;
+}
+
+static void mq1100fb_rotate (struct fb_info *fbinfo, int angle)
+{
+ /* For now it is not implemented but mq1100 fully
+ * supports display rotation.
+ */
+ debug_func ("\n");
+}
+
+static int mq1100fb_blank(int blank_mode, struct fb_info *fbinfo)
+{
+ struct mq1100fb_info *info = to_mq1100fb_info(fbinfo);
+
+ debug_func ("blank_mode:%d\n", blank_mode);
+
+ /*
+ * Blank the screen if blank_mode != 0, else unblank. If blank == NULL
+ * then the caller blanks by setting the CLUT (Color Look Up Table) to all
+ * black. Return 0 if blanking succeeded, != 0 if un-/blanking failed due
+ * to e.g. a video mode which doesn't support it. Implements VESA suspend
+ * and powerdown modes on hardware that supports disabling hsync/vsync:
+ * blank_mode == 2: suspend vsync
+ * blank_mode == 3: suspend hsync
+ * blank_mode == 4: powerdown
+ */
+
+ mq1100fb_power (info, blank_mode);
+
+ return 0;
+}
+
+/* ------------ Interfaces to hardware functions ------------ */
+
+static struct fb_ops mq1100fb_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = mq1100fb_check_var,
+ .fb_set_par = mq1100fb_set_par,
+ .fb_setcolreg = mq1100fb_setcolreg,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+ .fb_blank = mq1100fb_blank,
+ .fb_pan_display = mq1100fb_pan_display,
+ .fb_rotate = mq1100fb_rotate,
+ .fb_cursor = soft_cursor
+};
+
+static struct fb_bitfield def_rgb [3] = {
+ { 11, 5, 0 }, /* red */
+ { 5, 6, 0 }, /* green */
+ { 0, 5, 0 }, /* blue */
+};
+
+static int mq1100fb_finish_init (struct mq1100fb_info *info)
+{
+ int err;
+ int inst_ppm = ppm [info->inst];
+ if (!inst_ppm)
+ inst_ppm = 4210;
+
+ debug_func ("\n");
+
+ info->fb.var.red = def_rgb [0];
+ info->fb.var.green = def_rgb [1];
+ info->fb.var.blue = def_rgb [2];
+ info->fb.var.activate = FB_ACTIVATE_NOW;
+
+ strcpy (info->fb.fix.id, "mq1100");
+ info->fb.fix.type = FB_TYPE_PACKED_PIXELS;
+ info->fb.fix.type_aux = 0;
+ info->fb.fix.xpanstep = info->fb.fix.ypanstep = 0;
+ info->fb.fix.ywrapstep = 0;
+ info->fb.fix.accel = FB_ACCEL_NONE;
+
+ info->fb.screen_base = info->base->gfxram;
+ info->fb.pseudo_palette = &info->pseudo_pal;
+ info->fb.fbops = &mq1100fb_ops;
+
+ mq1100fb_update_screeninfo (info, inst_ppm);
+
+ info->fb_size = info->fb.fix.line_length * info->fb.var.yres_virtual;
+ info->fb_addr = info->base->alloc (info->base, info->fb_size, 1);
+
+ if (info->fb_addr == (u32)-1) {
+ err = -ENOMEM;
+ printk (KERN_ERR "Cannot allocate %u bytes in MediaQ internal RAM for framebuffer\n",
+ info->fb_size);
+error: kfree (info);
+ return err;
+ }
+
+ //info->fb.fix.mmio_start = info->base->paddr_regs;
+ //info->fb.fix.mmio_len = MQ11xx_REG_SIZE;
+ info->fb.fix.smem_start = info->base->paddr_gfxram + info->fb_addr;
+ info->fb.fix.smem_len = info->fb_size;
+
+ /* Program framebuffer start address */
+ info->base->regs->GC.window_start_address = info->fb_addr;
+
+ if ((err = register_framebuffer(&info->fb)) < 0) {
+ printk (KERN_ERR "Could not register mq1100 framebuffer\n");
+ info->base->free (info->base, info->fb_addr, info->fb_size);
+ goto error;
+ }
+
+ info->initcomplete = 1;
+
+ /* Clear the screen in the case we don't use fbcon */
+ memset (info->base->gfxram + info->fb_addr, 0, info->fb_size);
+
+ debug ("frame buffer device %dx%d-%dbpp\n",
+ info->fb.var.xres, info->fb.var.yres, info->fb.var.bits_per_pixel);
+ return 0;
+}
+
+static int mq1100fb_probe (struct device *dev, struct mediaq11xx_base *base)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct mq1100fb_info *info;
+
+ info = kmalloc (sizeof (struct mq1100fb_info), GFP_KERNEL);
+ memset (info, 0, sizeof (struct mq1100fb_info));
+ info->base = base;
+ info->inst = pdev->id;
+
+ dev_set_drvdata (dev, info);
+
+ /* Turn on the power to the MediaQ chip */
+ mq1100fb_power (info, 0);
+ mq1100fb_finish_init (info);
+
+ return 0;
+}
+
+static int mq1100fb_platform_probe (struct device *dev)
+{
+ debug_func ("\n");
+ return mq1100fb_probe (dev, (struct mediaq11xx_base *)dev->platform_data);
+}
+
+static int mq1100fb_platform_remove (struct device *dev)
+{
+ struct mq1100fb_info *info =
+ (struct mq1100fb_info *)dev_get_drvdata (dev);
+
+ debug_func ("\n");
+
+ if (info->active) {
+ mq1100fb_power (info, 4);
+ unregister_framebuffer (&info->fb);
+ info->base->free (info->base, info->fb_addr, info->fb_size);
+ }
+
+ return 0;
+}
+
+static int mq1100fb_platform_suspend (struct device *dev, u32 state, u32 level)
+{
+ struct mq1100fb_info *info =
+ (struct mq1100fb_info *)dev_get_drvdata (dev);
+
+ debug_func ("\n");
+
+ mq1100fb_power (info, 4);
+
+ return 0;
+}
+
+static int mq1100fb_platform_resume (struct device *dev, u32 level)
+{
+ struct mq1100fb_info *info =
+ (struct mq1100fb_info *)dev_get_drvdata (dev);
+
+ debug_func ("\n");
+
+ mq1100fb_power (info, 0);
+
+ return 0;
+}
+
+/* We need the framebuffer subdevice */
+struct device_driver mq1100fb_device_driver = {
+ .name = "mq11xx_fb",
+ .bus = &platform_bus_type,
+ .probe = mq1100fb_platform_probe,
+ .remove = mq1100fb_platform_remove,
+ .suspend = mq1100fb_platform_suspend,
+ .resume = mq1100fb_platform_resume
+};
+
+static int __init mq1100fb_init(void)
+{
+ return driver_register (&mq1100fb_device_driver);
+}
+
+static void __exit mq1100fb_exit(void)
+{
+ driver_unregister (&mq1100fb_device_driver);
+}
+
+module_init(mq1100fb_init);
+module_exit(mq1100fb_exit);
+
+MODULE_AUTHOR("Keith Packard <keithp@keithp.com>");
+MODULE_DESCRIPTION("Framebuffer driver for MediaQ 1100/32/68/78/88 chips");
+MODULE_LICENSE("GPL");
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2005-08-02 23:15    [W:0.037 / U:0.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site