lkml.org 
[lkml]   [2005]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: OOPS: frequent crashes with bttv in 2.6.X series (inc. 2.6.12)
bttv is now maintained by Mauro Carvalho Chehab 
<mchehab@brturbo.com.br>, as part of the video4linux project. I am
forwarding this to Mauro and the video4linux list. Linux and Kernel
Video <video4linux-list@redhat.com>

Jeremy Laine wrote:

>Hi!
>
>I keep getting OOPS's when using a Bt878 TV card, I am basically unable to watch
>TV for more than about 20-30mn without my system grinding to a halt. If I do not
>make use of the bttv module, the system is perfectly stable. I saw the bttv
>module is marked as "Orphan" in the MAINTAINERS file which is why I am writing
>straight to the LKML, do not hesitate to correct me if this is wrong!
>
>I have seen suggestions to try without PREEMPT enabled, which I will be doing
>shortly. Any other suggestions to get to the bottom of this problem are most
>welcome!
>
>The OOPS on 2.6.12 goes like so:
>
>Jul 6 10:43:58 sharky kernel: tuner 2-0060: TV freq (0.00) out of range
>(44-958)
>Jul 6 10:45:15 sharky kernel: tuner 2-0060: TV freq (0.00) out of range
>(44-958)
>Jul 6 10:55:44 sharky kernel: Unable to handle kernel paging request at virtual
>address 0386c028
>Jul 6 10:55:44 sharky kernel: printing eip:
>Jul 6 10:55:44 sharky kernel: c0162ac6
>Jul 6 10:55:44 sharky kernel: *pde = 00000000
>Jul 6 10:55:44 sharky kernel: Oops: 0000 [#1]
>Jul 6 10:55:44 sharky kernel: PREEMPT
>Jul 6 10:55:44 sharky kernel: Modules linked in: nls_iso8859_1 nls_cp437 vfat
>fat usb_storage vmnet vmmon lp ipt_TOS iptable_mangle ipt_MASQUERADE
>ipt_multiport ipt_REJECT ipt_LOG ipt_limit ipt_state iptable_filter parport_pc
>parport intel_agp 3c59x mii snd_bt87x tuner tda9887 msp3400 bttv video_buf
>firmware_class btcx_risc tveeprom sk98lin tun snd_pcm_oss snd_mixer_oss
>snd_intel8x0 snd_emu10k1 snd_rawmidi snd_seq_device snd_ac97_codec snd_pcm
>snd_timer snd_page_alloc snd_util_mem snd_hwdep snd soundcore ip_nat_ftp
>iptable_nat ip_tables ip_conntrack_ftp ip_conntrack nvidia usblp
>Jul 6 10:55:44 sharky kernel: CPU: 0
>Jul 6 10:55:44 sharky kernel: EIP: 0060:[__link_path_walk+1862/3520]
>Tainted: P VLI
>Jul 6 10:55:44 sharky kernel: EFLAGS: 00010206 (2.6.12)
>Jul 6 10:55:44 sharky kernel: EIP is at __link_path_walk+0x746/0xdc0
>Jul 6 10:55:44 sharky kernel: eax: 0386c000 ebx: d5c3f003 ecx: 00000000
>edx: c79e46b4
>Jul 6 10:55:44 sharky kernel: esi: 00000000 edi: ceac50b8 ebp: c7b85f10
>esp: c7b85e1c
>Jul 6 10:55:44 sharky kernel: ds: 007b es: 007b ss: 0068
>Jul 6 10:55:44 sharky kernel: Process sylpheed-claws (pid: 12722,
>threadinfo=c7b84000 task=cd51f020)
>Jul 6 10:55:44 sharky kernel: Stack: c7b85f10 c7b85e4c c7b85e44 f6696700
>00000000 c0156aab f6696700 0031f129
>Jul 6 10:55:44 sharky kernel: 00001000 00000001 c17e0c80 c79e46b4
>0011a425 00000003 d5c3f000 df56d0dc
>Jul 6 10:55:44 sharky kernel: c7b85f10 c7b85f50 c7b85eb8 c7b85e78
>c0163187 df56d0dc d5c3f000 df56d0dc
>Jul 6 10:55:44 sharky kernel: Call Trace:
>Jul 6 10:55:44 sharky kernel: [__getblk+43/96] __getblk+0x2b/0x60
>Jul 6 10:55:44 sharky kernel: [link_path_walk+71/224] link_path_walk+0x47/0xe0
>Jul 6 10:55:44 sharky kernel: [path_lookup+127/320] path_lookup+0x7f/0x140
>Jul 6 10:55:44 sharky kernel: [__user_walk+51/96] __user_walk+0x33/0x60
>Jul 6 10:55:44 sharky kernel: [vfs_stat+31/96] vfs_stat+0x1f/0x60
>Jul 6 10:55:44 sharky kernel: [sys_stat64+27/64] sys_stat64+0x1b/0x40
>Jul 6 10:55:44 sharky kernel: [schedule+228/1568] schedule+0xe4/0x620
>Jul 6 10:55:44 sharky kernel: [do_gettimeofday+26/208]
>do_gettimeofday+0x1a/0xd0
>Jul 6 10:55:44 sharky kernel: [sys_time+23/64] sys_time+0x17/0x40
>Jul 6 10:55:44 sharky kernel: [syscall_call+7/11] syscall_call+0x7/0xb
>Jul 6 10:55:44 sharky kernel: Code: fb ff ff f6 44 24 24 01 8b 54 24 2c 8b 7a
>08 0f 84 44 03 00 00 85 ff 0f 84 3c 03 00 00 8b 87 8c 00 00 00 85 c0 0f 84 2e
>03 00 00 <8b> 70 28 85 f6 0f 84 23 03 00 00 bb 00 e0 ff ff 21 e3 8b 03 83
>
>Below is some information about my environment:
>
>---[ /proc/cpuinfo ]---
>
>processor : 0
>vendor_id : GenuineIntel
>cpu family : 15
>model : 2
>model name : Intel(R) Pentium(R) 4 CPU 2.80GHz
>stepping : 9
>cpu MHz : 2807.248
>cache size : 512 KB
>fdiv_bug : no
>hlt_bug : no
>f00f_bug : no
>coma_bug : no
>fpu : yes
>fpu_exception : yes
>cpuid level : 2
>wp : yes
>flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36
>clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid xtpr
>bogomips : 5537.79
>
>
>---[ /proc/modules ]---
>
>vmnet 32420 3 - Live 0xf8bd2000
>vmmon 172076 0 - Live 0xf8bf0000
>lp 11588 0 - Live 0xf8bc3000
>ipt_TOS 2688 1 - Live 0xf8bc1000
>iptable_mangle 2944 1 - Live 0xf8bb1000
>ipt_MASQUERADE 3584 1 - Live 0xf8bba000
>ipt_multiport 2688 4 - Live 0xf8b6f000
>ipt_REJECT 5248 4 - Live 0xf8bb4000
>ipt_LOG 7296 4 - Live 0xf8b9d000
>ipt_limit 2560 4 - Live 0xf8b9b000
>ipt_state 2048 13 - Live 0xf8b71000
>iptable_filter 3200 1 - Live 0xf8b19000
>parport_pc 36036 1 - Live 0xf8b51000
>parport 25664 2 lp,parport_pc, Live 0xf8b67000
>usblp 13312 0 - Live 0xf8b4c000
>intel_agp 23580 1 - Live 0xf8aff000
>3c59x 42152 0 - Live 0xf8b5b000
>mii 5760 1 3c59x, Live 0xf8afc000
>snd_bt87x 15048 0 - Live 0xf8b0f000
>tuner 28712 0 - Live 0xf8b06000
>tda9887 14360 0 - Live 0xf8ad5000
>msp3400 27944 0 - Live 0xf8aed000
>bttv 157968 0 - Live 0xf8b73000
>video_buf 22404 1 bttv, Live 0xf8af5000
>firmware_class 10496 1 bttv, Live 0xf8ada000
>btcx_risc 5128 1 bttv, Live 0xf8abd000
>tveeprom 13464 1 bttv, Live 0xf8998000
>sk98lin 177248 0 - Live 0xf8b1f000
>tun 11776 2 - Live 0xf89b5000
>snd_pcm_oss 53536 0 - Live 0xf8ade000
>snd_mixer_oss 19840 1 snd_pcm_oss, Live 0xf8ab7000
>snd_intel8x0 33984 0 - Live 0xf8ac3000
>snd_emu10k1 118788 0 - Live 0xf8a33000
>snd_rawmidi 25888 1 snd_emu10k1, Live 0xf89c6000
>snd_seq_device 8844 2 snd_emu10k1,snd_rawmidi, Live 0xf89a1000
>snd_ac97_codec 83320 2 snd_intel8x0,snd_emu10k1, Live 0xf89fb000
>snd_pcm 95240 5 snd_bt87x,snd_pcm_oss,snd_intel8x0,snd_emu10k1,snd_ac97_codec,
>Live 0xf89e2000
>snd_timer 25860 2 snd_emu10k1,snd_pcm, Live 0xf89be000
>snd_page_alloc 10244 4 snd_bt87x,snd_intel8x0,snd_emu10k1,snd_pcm, Live
>0xf899d000
>snd_util_mem 4736 1 snd_emu10k1, Live 0xf898b000
>snd_hwdep 9504 1 snd_emu10k1, Live 0xf8994000
>snd 54756 11
>snd_bt87x,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_emu10k1,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm,snd_timer,snd_hwdep,
>Live 0xf89a6000
>soundcore 10464 1 snd, Live 0xf8990000
>ip_nat_ftp 3712 0 - Live 0xf8949000
>iptable_nat 24028 3 ipt_MASQUERADE,ip_nat_ftp, Live 0xf8973000
>ip_tables 22400 10
>ipt_TOS,iptable_mangle,ipt_MASQUERADE,ipt_multiport,ipt_REJECT,ipt_LOG,ipt_limit,ipt_state,iptable_filter,iptable_nat,
>Live 0xf894c000
>ip_conntrack_ftp 73104 1 ip_nat_ftp, Live 0xf8960000
>ip_conntrack 45752 5
>ipt_MASQUERADE,ipt_state,ip_nat_ftp,iptable_nat,ip_conntrack_ftp, Live
>0xf8953000
>nvidia 3922812 12 - Live 0xf8d3b000
>
>
>---[ /proc/ioports ]---
>
>0000-001f : dma1
>0020-0021 : pic1
>0040-0043 : timer0
>0050-0053 : timer1
>0060-006f : keyboard
>0070-0077 : rtc
>0080-008f : dma page reg
>00a0-00a1 : pic2
>00c0-00df : dma2
>00f0-00ff : fpu
>0170-0177 : ide1
>01f0-01f7 : ide0
>0290-0297 : pnp 00:0a
>02f8-02ff : serial
>0376-0376 : ide1
>0378-037a : parport0
>03c0-03df : vga+
>03f6-03f6 : ide0
>03f8-03ff : serial
>0400-041f : 0000:00:1f.3
> 0400-040f : i801-smbus
>0480-04bf : 0000:00:1f.0
>0680-06ff : pnp 00:0a
>0800-087f : 0000:00:1f.0
> 0800-0803 : PM1a_EVT_BLK
> 0804-0805 : PM1a_CNT_BLK
> 0808-080b : PM_TMR
> 0828-082f : GPE0_BLK
>0cf8-0cff : PCI conf1
>b000-b0ff : 0000:00:1f.5
> b000-b0ff : Intel ICH5
>b400-b43f : 0000:00:1f.5
> b400-b43f : Intel ICH5
>b480-b49f : 0000:00:1d.0
> b480-b49f : uhci_hcd
>b800-b81f : 0000:00:1d.1
> b800-b81f : uhci_hcd
>b880-b89f : 0000:00:1d.2
> b880-b89f : uhci_hcd
>bc00-bc1f : 0000:00:1d.3
> bc00-bc1f : uhci_hcd
>c880-c8ff : 0000:02:0c.0
> c880-c8ff : 0000:02:0c.0
>cc00-cc1f : 0000:02:0b.0
> cc00-cc1f : EMU10K1
>d000-d007 : 0000:02:0b.1
> d000-d007 : emu10k1-gp
>d080-d08f : 0000:02:09.0
>d400-d403 : 0000:02:09.0
>d480-d487 : 0000:02:09.0
>d800-d8ff : 0000:02:05.0
> d800-d8ff : SysKonnect SK-98xx
>dc00-dc03 : 0000:02:09.0
>e000-e007 : 0000:02:09.0
>e080-e08f : 0000:02:04.0
>e400-e403 : 0000:02:04.0
>e480-e487 : 0000:02:04.0
>e800-e803 : 0000:02:04.0
>e880-e887 : 0000:02:04.0
>ec00-ec7f : 0000:02:03.0
>fc00-fc0f : 0000:00:1f.1
> fc00-fc07 : ide0
> fc08-fc0f : ide1
>
>
>---[ /proc/iomem ]---
>
>00000000-0009fbff : System RAM
>0009fc00-0009ffff : reserved
>000a0000-000bffff : Video RAM area
>000c0000-000c7fff : Video ROM
>000ce800-000d2bff : Adapter ROM
>000d3000-000d37ff : Adapter ROM
>000f0000-000fffff : System ROM
>00100000-3ff2ffff : System RAM
> 00100000-0035a10c : Kernel code
> 0035a10d-0045ab7f : Kernel data
>3ff30000-3ff3ffff : ACPI Tables
>3ff40000-3ffeffff : ACPI Non-volatile Storage
>3fff0000-3fffffff : reserved
>40000000-400003ff : 0000:00:1f.1
>e0000000-f3efffff : PCI Bus #01
> e0000000-efffffff : 0000:01:00.0
>f3ffe000-f3ffefff : 0000:02:0a.0
> f3ffe000-f3ffefff : bttv0
>f3fff000-f3ffffff : 0000:02:0a.1
>f4fff400-f4fff4ff : 0000:00:1f.5
> f4fff400-f4fff4ff : Intel ICH5
>f4fff800-f4fff9ff : 0000:00:1f.5
> f4fff800-f4fff9ff : Intel ICH5
>f4fffc00-f4ffffff : 0000:00:1d.7
> f4fffc00-f4ffffff : ehci_hcd
>f5000000-f7efffff : PCI Bus #01
> f5000000-f5ffffff : 0000:01:00.0
> f6000000-f6ffffff : 0000:01:00.0
> f6000000-f6ffffff : nvidia
>f7ff4000-f7ff7fff : 0000:02:05.0
> f7ff4000-f7ff7fff : SysKonnect SK-98xx
>f7fff000-f7fff07f : 0000:02:0c.0
>f7fff400-f7fff4ff : 0000:02:09.0
> f7fff400-f7fff4ff : SiI680
>f7fff800-f7ffffff : 0000:02:03.0
>f8000000-fbffffff : 0000:00:00.0
>ffb80000-ffffffff : reserved
>
>
>---[ lspci -vvv ]---
>
>0000:00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM Controller/Host-Hub
>Interface (rev 02)
> Subsystem: Asustek Computer, Inc. P4P800 Mainboard
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
>SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
><MAbort+ >SERR- <PERR-
> Latency: 0
> Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
> Capabilities: [e4] #09 [2106]
> Capabilities: [a0] AGP version 3.0
> Status: RQ=32 Iso- ArqSz=2 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+
>Rate=x4,x8
> Command: RQ=1 ArqSz=0 Cal=2 SBA+ AGP+ GART64- 64bit- FW- Rate=x8
>
>0000:00:01.0 PCI bridge: Intel Corp. 82865G/PE/P PCI to AGP Controller (rev 02)
>(prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
>SERR+ FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
><MAbort- >SERR- <PERR-
> Latency: 64
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: f5000000-f7efffff
> Prefetchable memory behind bridge: e0000000-f3efffff
> BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
>
>0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1
>(rev 02) (prog-if 00 [UHCI])
> Subsystem: Asustek Computer, Inc. P4P800 Mainboard
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
>SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
><MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin A routed to IRQ 16
> Region 4: I/O ports at b480 [size=32]
>
>0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2
>(rev 02) (prog-if 00 [UHCI])
> Subsystem: Asustek Computer, Inc. P4P800 Mainboard
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
>SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
><MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin B routed to IRQ 19
> Region 4: I/O ports at b800 [size=32]
>
>0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3
>(rev 02) (prog-if 00 [UHCI])
> Subsystem: Asustek Computer, Inc. P4P800 Mainboard
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
>SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
><MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin C routed to IRQ 18
> Region 4: I/O ports at b880 [size=32]
>
>0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4
>(rev 02) (prog-if 00 [UHCI])
> Subsystem: Asustek Computer, Inc. P4P800 Mainboard
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
>SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
><MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin A routed to IRQ 16
> Region 4: I/O ports at bc00 [size=32]
>
>0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI
>Controller (rev 02) (prog-if 20 [EHCI])
> Subsystem: Asustek Computer, Inc. P4P800 Mainboard
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
>SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
><MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin D routed to IRQ 23
> Region 0: Memory at f4fffc00 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] #0a [20a0]
>
>0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2) (prog-if 00
>[Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
>SERR+ FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
><MAbort- >SERR- <PERR-
> Latency: 0
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
> I/O behind bridge: 0000c000-0000efff
> Memory behind bridge: f7f00000-fbffffff
> Prefetchable memory behind bridge: f3f00000-f3ffffff
> BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>
>0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02)
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping-
>SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
><MAbort- >SERR- <PERR-
> Latency: 0
>
>0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100
>Storage Controller (rev 02) (prog-if 8a [Master SecP PriP])
> Subsystem: Asustek Computer, Inc. P4P800 Mainboard
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
>SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
><MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin A routed to IRQ 18
> Region 0: I/O ports at <unassigned>
> Region 1: I/O ports at <unassigned>
> Region 2: I/O ports at <unassigned>
> Region 3: I/O ports at <unassigned>
> Region 4: I/O ports at fc00 [size=16]
> Region 5: Memory at 40000000 (32-bit, non-prefetchable) [size=1K]
>
>0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev
>02)
> Subsystem: Asustek Computer, Inc. P4P800 Mainboard
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
>SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
><MAbort- >SERR- <PERR-
> Interrupt: pin B routed to IRQ 5
> Region 4: I/O ports at 0400 [size=32]
>
>0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER (ICH5/ICH5R)
>AC'97 Audio Controller (rev 02)
> Subsystem: Asustek Computer, Inc. P4P800 Mainboard
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
>SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
><MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin B routed to IRQ 17
> Region 0: I/O ports at b000 [size=256]
> Region 1: I/O ports at b400 [size=64]
> Region 2: Memory at f4fff800 (32-bit, non-prefetchable) [size=512]
> Region 3: Memory at f4fff400 (32-bit, non-prefetchable) [size=256]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>0000:01:00.0 VGA compatible controller: nVidia Corporation NV40 OS1RT00B30 (rev
>a1) (prog-if 00 [VGA])
> Subsystem: Asustek Computer, Inc.: Unknown device 817b
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
>SERR+ FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
><MAbort- >SERR- <PERR-
> Latency: 248 (1250ns min, 250ns max)
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
> Region 1: Memory at e0000000 (32-bit, prefetchable) [size=256M]
> Region 2: Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
> Expansion ROM at f7ee0000 [disabled] [size=128K]
> Capabilities: [60] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [44] AGP version 3.0
> Status: RQ=256 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW+
>AGP3+ Rate=x4,x8
> Command: RQ=32 ArqSz=2 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8
>
>0000:02:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
>Controller (rev 46) (prog-if 10 [OHCI])
> Subsystem: Asustek Computer, Inc.: Unknown device 808a
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
>SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
><MAbort- >SERR- <PERR-
> Latency: 64 (8000ns max), Cache Line Size: 0x04 (16 bytes)
> Interrupt: pin A routed to IRQ 5
> Region 0: Memory at f7fff800 (32-bit, non-prefetchable) [size=2K]
> Region 1: I/O ports at ec00 [size=128]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>0000:02:04.0 RAID bus controller: VIA Technologies, Inc. VT6410 ATA133 RAID
>controller (rev 06)
> Subsystem: Asustek Computer, Inc.: Unknown device 80f4
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
>SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
><MAbort- >SERR- <PERR-
> Latency: 64
> Interrupt: pin A routed to IRQ 11
> Region 0: I/O ports at e880 [size=8]
> Region 1: I/O ports at e800 [size=4]
> Region 2: I/O ports at e480 [size=8]
> Region 3: I/O ports at e400 [size=4]
> Region 4: I/O ports at e080 [size=16]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>0000:02:05.0 Ethernet controller: 3Com Corporation 3c940 10/100/1000Base-T
>[Marvell] (rev 12)
> Subsystem: Asustek Computer, Inc. P4P800 Mainboard
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
>SERR+ FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
><MAbort- >SERR- <PERR-
> Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 0x04 (16 bytes)
> Interrupt: pin A routed to IRQ 22
> Region 0: Memory at f7ff4000 (32-bit, non-prefetchable) [size=16K]
> Region 1: I/O ports at d800 [size=256]
> Capabilities: [48] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=1 PME-
> Capabilities: [50] Vital Product Data
>
>0000:02:09.0 RAID bus controller: Silicon Image, Inc. (formerly CMD Technology
>Inc) PCI0680 Ultra ATA-133 Host Controller (rev 02)
> Subsystem: Silicon Image, Inc. (formerly CMD Technology Inc) Winic W-680
>(Silicon Image 680 based)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
>SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
><MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 0x01 (4 bytes)
> Interrupt: pin A routed to IRQ 21
> Region 0: I/O ports at e000 [size=8]
> Region 1: I/O ports at dc00 [size=4]
> Region 2: I/O ports at d480 [size=8]
> Region 3: I/O ports at d400 [size=4]
> Region 4: I/O ports at d080 [size=16]
> Region 5: Memory at f7fff400 (32-bit, non-prefetchable) [size=256]
> Expansion ROM at f7f00000 [disabled] [size=512K]
> Capabilities: [60] Power Management version 2
> Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
>0000:02:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video
>Capture (rev 11)
> Subsystem: Pinnacle Systems Inc. PCTV pro (TV + FM stereo receiver)
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
>SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
><MAbort- >SERR- <PERR-
> Latency: 64 (4000ns min, 10000ns max)
> Interrupt: pin A routed to IRQ 22
> Region 0: Memory at f3ffe000 (32-bit, prefetchable) [size=4K]
> Capabilities: [44] Vital Product Data
> Capabilities: [4c] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>0000:02:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture
>(rev 11)
> Subsystem: Pinnacle Systems Inc. PCTV pro (TV + FM stereo receiver, audio
>section)
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
>SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
><MAbort- >SERR- <PERR-
> Latency: 64 (1000ns min, 63750ns max)
> Interrupt: pin A routed to IRQ 5
> Region 0: Memory at f3fff000 (32-bit, prefetchable) [size=4K]
> Capabilities: [44] Vital Product Data
> Capabilities: [4c] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>0000:02:0b.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev
>08)
> Subsystem: Creative Labs CT4850 SBLive! Value
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
>SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
><MAbort- >SERR- <PERR-
> Latency: 64 (500ns min, 5000ns max)
> Interrupt: pin A routed to IRQ 23
> Region 0: I/O ports at cc00 [size=32]
> Capabilities: [dc] Power Management version 1
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>0000:02:0b.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev
>08)
> Subsystem: Creative Labs Gameport Joystick
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
>SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
><MAbort- >SERR- <PERR-
> Latency: 64
> Region 0: I/O ports at d000 [size=8]
> Capabilities: [dc] Power Management version 1
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>0000:02:0c.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev
>74)
> Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management NIC
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
>SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
><MAbort- >SERR- <PERR-
> Latency: 64 (2500ns min, 2500ns max), Cache Line Size: 0x04 (16 bytes)
> Interrupt: pin A routed to IRQ 20
> Region 0: I/O ports at c880 [size=128]
> Region 1: Memory at f7fff000 (32-bit, non-prefetchable) [size=128]
> Expansion ROM at f7fc0000 [disabled] [size=128K]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
>Thanks in advance for any pointers!
>
>Jeremy
>
>
>


--
Michael Krufky


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-07-07 05:52    [W:0.135 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site