lkml.org 
[lkml]   [2005]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectOOPS: frequent crashes with bttv in 2.6.X series (inc. 2.6.12)
Hi!

I keep getting OOPS's when using a Bt878 TV card, I am basically unable to watch
TV for more than about 20-30mn without my system grinding to a halt. If I do not
make use of the bttv module, the system is perfectly stable. I saw the bttv
module is marked as "Orphan" in the MAINTAINERS file which is why I am writing
straight to the LKML, do not hesitate to correct me if this is wrong!

I have seen suggestions to try without PREEMPT enabled, which I will be doing
shortly. Any other suggestions to get to the bottom of this problem are most
welcome!

The OOPS on 2.6.12 goes like so:

Jul 6 10:43:58 sharky kernel: tuner 2-0060: TV freq (0.00) out of range
(44-958)
Jul 6 10:45:15 sharky kernel: tuner 2-0060: TV freq (0.00) out of range
(44-958)
Jul 6 10:55:44 sharky kernel: Unable to handle kernel paging request at virtual
address 0386c028
Jul 6 10:55:44 sharky kernel: printing eip:
Jul 6 10:55:44 sharky kernel: c0162ac6
Jul 6 10:55:44 sharky kernel: *pde = 00000000
Jul 6 10:55:44 sharky kernel: Oops: 0000 [#1]
Jul 6 10:55:44 sharky kernel: PREEMPT
Jul 6 10:55:44 sharky kernel: Modules linked in: nls_iso8859_1 nls_cp437 vfat
fat usb_storage vmnet vmmon lp ipt_TOS iptable_mangle ipt_MASQUERADE
ipt_multiport ipt_REJECT ipt_LOG ipt_limit ipt_state iptable_filter parport_pc
parport intel_agp 3c59x mii snd_bt87x tuner tda9887 msp3400 bttv video_buf
firmware_class btcx_risc tveeprom sk98lin tun snd_pcm_oss snd_mixer_oss
snd_intel8x0 snd_emu10k1 snd_rawmidi snd_seq_device snd_ac97_codec snd_pcm
snd_timer snd_page_alloc snd_util_mem snd_hwdep snd soundcore ip_nat_ftp
iptable_nat ip_tables ip_conntrack_ftp ip_conntrack nvidia usblp
Jul 6 10:55:44 sharky kernel: CPU: 0
Jul 6 10:55:44 sharky kernel: EIP: 0060:[__link_path_walk+1862/3520]
Tainted: P VLI
Jul 6 10:55:44 sharky kernel: EFLAGS: 00010206 (2.6.12)
Jul 6 10:55:44 sharky kernel: EIP is at __link_path_walk+0x746/0xdc0
Jul 6 10:55:44 sharky kernel: eax: 0386c000 ebx: d5c3f003 ecx: 00000000
edx: c79e46b4
Jul 6 10:55:44 sharky kernel: esi: 00000000 edi: ceac50b8 ebp: c7b85f10
esp: c7b85e1c
Jul 6 10:55:44 sharky kernel: ds: 007b es: 007b ss: 0068
Jul 6 10:55:44 sharky kernel: Process sylpheed-claws (pid: 12722,
threadinfo=c7b84000 task=cd51f020)
Jul 6 10:55:44 sharky kernel: Stack: c7b85f10 c7b85e4c c7b85e44 f6696700
00000000 c0156aab f6696700 0031f129
Jul 6 10:55:44 sharky kernel: 00001000 00000001 c17e0c80 c79e46b4
0011a425 00000003 d5c3f000 df56d0dc
Jul 6 10:55:44 sharky kernel: c7b85f10 c7b85f50 c7b85eb8 c7b85e78
c0163187 df56d0dc d5c3f000 df56d0dc
Jul 6 10:55:44 sharky kernel: Call Trace:
Jul 6 10:55:44 sharky kernel: [__getblk+43/96] __getblk+0x2b/0x60
Jul 6 10:55:44 sharky kernel: [link_path_walk+71/224] link_path_walk+0x47/0xe0
Jul 6 10:55:44 sharky kernel: [path_lookup+127/320] path_lookup+0x7f/0x140
Jul 6 10:55:44 sharky kernel: [__user_walk+51/96] __user_walk+0x33/0x60
Jul 6 10:55:44 sharky kernel: [vfs_stat+31/96] vfs_stat+0x1f/0x60
Jul 6 10:55:44 sharky kernel: [sys_stat64+27/64] sys_stat64+0x1b/0x40
Jul 6 10:55:44 sharky kernel: [schedule+228/1568] schedule+0xe4/0x620
Jul 6 10:55:44 sharky kernel: [do_gettimeofday+26/208]
do_gettimeofday+0x1a/0xd0
Jul 6 10:55:44 sharky kernel: [sys_time+23/64] sys_time+0x17/0x40
Jul 6 10:55:44 sharky kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Jul 6 10:55:44 sharky kernel: Code: fb ff ff f6 44 24 24 01 8b 54 24 2c 8b 7a
08 0f 84 44 03 00 00 85 ff 0f 84 3c 03 00 00 8b 87 8c 00 00 00 85 c0 0f 84 2e
03 00 00 <8b> 70 28 85 f6 0f 84 23 03 00 00 bb 00 e0 ff ff 21 e3 8b 03 83

Below is some information about my environment:

---[ /proc/cpuinfo ]---

processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 2.80GHz
stepping : 9
cpu MHz : 2807.248
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36
clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid xtpr
bogomips : 5537.79


---[ /proc/modules ]---

vmnet 32420 3 - Live 0xf8bd2000
vmmon 172076 0 - Live 0xf8bf0000
lp 11588 0 - Live 0xf8bc3000
ipt_TOS 2688 1 - Live 0xf8bc1000
iptable_mangle 2944 1 - Live 0xf8bb1000
ipt_MASQUERADE 3584 1 - Live 0xf8bba000
ipt_multiport 2688 4 - Live 0xf8b6f000
ipt_REJECT 5248 4 - Live 0xf8bb4000
ipt_LOG 7296 4 - Live 0xf8b9d000
ipt_limit 2560 4 - Live 0xf8b9b000
ipt_state 2048 13 - Live 0xf8b71000
iptable_filter 3200 1 - Live 0xf8b19000
parport_pc 36036 1 - Live 0xf8b51000
parport 25664 2 lp,parport_pc, Live 0xf8b67000
usblp 13312 0 - Live 0xf8b4c000
intel_agp 23580 1 - Live 0xf8aff000
3c59x 42152 0 - Live 0xf8b5b000
mii 5760 1 3c59x, Live 0xf8afc000
snd_bt87x 15048 0 - Live 0xf8b0f000
tuner 28712 0 - Live 0xf8b06000
tda9887 14360 0 - Live 0xf8ad5000
msp3400 27944 0 - Live 0xf8aed000
bttv 157968 0 - Live 0xf8b73000
video_buf 22404 1 bttv, Live 0xf8af5000
firmware_class 10496 1 bttv, Live 0xf8ada000
btcx_risc 5128 1 bttv, Live 0xf8abd000
tveeprom 13464 1 bttv, Live 0xf8998000
sk98lin 177248 0 - Live 0xf8b1f000
tun 11776 2 - Live 0xf89b5000
snd_pcm_oss 53536 0 - Live 0xf8ade000
snd_mixer_oss 19840 1 snd_pcm_oss, Live 0xf8ab7000
snd_intel8x0 33984 0 - Live 0xf8ac3000
snd_emu10k1 118788 0 - Live 0xf8a33000
snd_rawmidi 25888 1 snd_emu10k1, Live 0xf89c6000
snd_seq_device 8844 2 snd_emu10k1,snd_rawmidi, Live 0xf89a1000
snd_ac97_codec 83320 2 snd_intel8x0,snd_emu10k1, Live 0xf89fb000
snd_pcm 95240 5 snd_bt87x,snd_pcm_oss,snd_intel8x0,snd_emu10k1,snd_ac97_codec,
Live 0xf89e2000
snd_timer 25860 2 snd_emu10k1,snd_pcm, Live 0xf89be000
snd_page_alloc 10244 4 snd_bt87x,snd_intel8x0,snd_emu10k1,snd_pcm, Live
0xf899d000
snd_util_mem 4736 1 snd_emu10k1, Live 0xf898b000
snd_hwdep 9504 1 snd_emu10k1, Live 0xf8994000
snd 54756 11
snd_bt87x,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_emu10k1,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm,snd_timer,snd_hwdep,
Live 0xf89a6000
soundcore 10464 1 snd, Live 0xf8990000
ip_nat_ftp 3712 0 - Live 0xf8949000
iptable_nat 24028 3 ipt_MASQUERADE,ip_nat_ftp, Live 0xf8973000
ip_tables 22400 10
ipt_TOS,iptable_mangle,ipt_MASQUERADE,ipt_multiport,ipt_REJECT,ipt_LOG,ipt_limit,ipt_state,iptable_filter,iptable_nat,
Live 0xf894c000
ip_conntrack_ftp 73104 1 ip_nat_ftp, Live 0xf8960000
ip_conntrack 45752 5
ipt_MASQUERADE,ipt_state,ip_nat_ftp,iptable_nat,ip_conntrack_ftp, Live
0xf8953000
nvidia 3922812 12 - Live 0xf8d3b000


---[ /proc/ioports ]---

0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0290-0297 : pnp 00:0a
02f8-02ff : serial
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial
0400-041f : 0000:00:1f.3
0400-040f : i801-smbus
0480-04bf : 0000:00:1f.0
0680-06ff : pnp 00:0a
0800-087f : 0000:00:1f.0
0800-0803 : PM1a_EVT_BLK
0804-0805 : PM1a_CNT_BLK
0808-080b : PM_TMR
0828-082f : GPE0_BLK
0cf8-0cff : PCI conf1
b000-b0ff : 0000:00:1f.5
b000-b0ff : Intel ICH5
b400-b43f : 0000:00:1f.5
b400-b43f : Intel ICH5
b480-b49f : 0000:00:1d.0
b480-b49f : uhci_hcd
b800-b81f : 0000:00:1d.1
b800-b81f : uhci_hcd
b880-b89f : 0000:00:1d.2
b880-b89f : uhci_hcd
bc00-bc1f : 0000:00:1d.3
bc00-bc1f : uhci_hcd
c880-c8ff : 0000:02:0c.0
c880-c8ff : 0000:02:0c.0
cc00-cc1f : 0000:02:0b.0
cc00-cc1f : EMU10K1
d000-d007 : 0000:02:0b.1
d000-d007 : emu10k1-gp
d080-d08f : 0000:02:09.0
d400-d403 : 0000:02:09.0
d480-d487 : 0000:02:09.0
d800-d8ff : 0000:02:05.0
d800-d8ff : SysKonnect SK-98xx
dc00-dc03 : 0000:02:09.0
e000-e007 : 0000:02:09.0
e080-e08f : 0000:02:04.0
e400-e403 : 0000:02:04.0
e480-e487 : 0000:02:04.0
e800-e803 : 0000:02:04.0
e880-e887 : 0000:02:04.0
ec00-ec7f : 0000:02:03.0
fc00-fc0f : 0000:00:1f.1
fc00-fc07 : ide0
fc08-fc0f : ide1


---[ /proc/iomem ]---

00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000ce800-000d2bff : Adapter ROM
000d3000-000d37ff : Adapter ROM
000f0000-000fffff : System ROM
00100000-3ff2ffff : System RAM
00100000-0035a10c : Kernel code
0035a10d-0045ab7f : Kernel data
3ff30000-3ff3ffff : ACPI Tables
3ff40000-3ffeffff : ACPI Non-volatile Storage
3fff0000-3fffffff : reserved
40000000-400003ff : 0000:00:1f.1
e0000000-f3efffff : PCI Bus #01
e0000000-efffffff : 0000:01:00.0
f3ffe000-f3ffefff : 0000:02:0a.0
f3ffe000-f3ffefff : bttv0
f3fff000-f3ffffff : 0000:02:0a.1
f4fff400-f4fff4ff : 0000:00:1f.5
f4fff400-f4fff4ff : Intel ICH5
f4fff800-f4fff9ff : 0000:00:1f.5
f4fff800-f4fff9ff : Intel ICH5
f4fffc00-f4ffffff : 0000:00:1d.7
f4fffc00-f4ffffff : ehci_hcd
f5000000-f7efffff : PCI Bus #01
f5000000-f5ffffff : 0000:01:00.0
f6000000-f6ffffff : 0000:01:00.0
f6000000-f6ffffff : nvidia
f7ff4000-f7ff7fff : 0000:02:05.0
f7ff4000-f7ff7fff : SysKonnect SK-98xx
f7fff000-f7fff07f : 0000:02:0c.0
f7fff400-f7fff4ff : 0000:02:09.0
f7fff400-f7fff4ff : SiI680
f7fff800-f7ffffff : 0000:02:03.0
f8000000-fbffffff : 0000:00:00.0
ffb80000-ffffffff : reserved


---[ lspci -vvv ]---

0000:00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM Controller/Host-Hub
Interface (rev 02)
Subsystem: Asustek Computer, Inc. P4P800 Mainboard
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [e4] #09 [2106]
Capabilities: [a0] AGP version 3.0
Status: RQ=32 Iso- ArqSz=2 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+
Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=2 SBA+ AGP+ GART64- 64bit- FW- Rate=x8

0000:00:01.0 PCI bridge: Intel Corp. 82865G/PE/P PCI to AGP Controller (rev 02)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f5000000-f7efffff
Prefetchable memory behind bridge: e0000000-f3efffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-

0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1
(rev 02) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. P4P800 Mainboard
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at b480 [size=32]

0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2
(rev 02) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. P4P800 Mainboard
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at b800 [size=32]

0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3
(rev 02) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. P4P800 Mainboard
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at b880 [size=32]

0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4
(rev 02) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. P4P800 Mainboard
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at bc00 [size=32]

0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI
Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Asustek Computer, Inc. P4P800 Mainboard
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at f4fffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] #0a [20a0]

0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 0000c000-0000efff
Memory behind bridge: f7f00000-fbffffff
Prefetchable memory behind bridge: f3f00000-f3ffffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-

0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0

0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100
Storage Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Asustek Computer, Inc. P4P800 Mainboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at fc00 [size=16]
Region 5: Memory at 40000000 (32-bit, non-prefetchable) [size=1K]

0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev
02)
Subsystem: Asustek Computer, Inc. P4P800 Mainboard
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at 0400 [size=32]

0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER (ICH5/ICH5R)
AC'97 Audio Controller (rev 02)
Subsystem: Asustek Computer, Inc. P4P800 Mainboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at b000 [size=256]
Region 1: I/O ports at b400 [size=64]
Region 2: Memory at f4fff800 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at f4fff400 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:01:00.0 VGA compatible controller: nVidia Corporation NV40 OS1RT00B30 (rev
a1) (prog-if 00 [VGA])
Subsystem: Asustek Computer, Inc.: Unknown device 817b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Region 2: Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
Expansion ROM at f7ee0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 3.0
Status: RQ=256 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW+
AGP3+ Rate=x4,x8
Command: RQ=32 ArqSz=2 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8

0000:02:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
Controller (rev 46) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 808a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (8000ns max), Cache Line Size: 0x04 (16 bytes)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at f7fff800 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at ec00 [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:02:04.0 RAID bus controller: VIA Technologies, Inc. VT6410 ATA133 RAID
controller (rev 06)
Subsystem: Asustek Computer, Inc.: Unknown device 80f4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at e880 [size=8]
Region 1: I/O ports at e800 [size=4]
Region 2: I/O ports at e480 [size=8]
Region 3: I/O ports at e400 [size=4]
Region 4: I/O ports at e080 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:02:05.0 Ethernet controller: 3Com Corporation 3c940 10/100/1000Base-T
[Marvell] (rev 12)
Subsystem: Asustek Computer, Inc. P4P800 Mainboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 0x04 (16 bytes)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f7ff4000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at d800 [size=256]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data

0000:02:09.0 RAID bus controller: Silicon Image, Inc. (formerly CMD Technology
Inc) PCI0680 Ultra ATA-133 Host Controller (rev 02)
Subsystem: Silicon Image, Inc. (formerly CMD Technology Inc) Winic W-680
(Silicon Image 680 based)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 0x01 (4 bytes)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at e000 [size=8]
Region 1: I/O ports at dc00 [size=4]
Region 2: I/O ports at d480 [size=8]
Region 3: I/O ports at d400 [size=4]
Region 4: I/O ports at d080 [size=16]
Region 5: Memory at f7fff400 (32-bit, non-prefetchable) [size=256]
Expansion ROM at f7f00000 [disabled] [size=512K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-

0000:02:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
Subsystem: Pinnacle Systems Inc. PCTV pro (TV + FM stereo receiver)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (4000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f3ffe000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:02:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture
(rev 11)
Subsystem: Pinnacle Systems Inc. PCTV pro (TV + FM stereo receiver, audio
section)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at f3fff000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:02:0b.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev
08)
Subsystem: Creative Labs CT4850 SBLive! Value
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at cc00 [size=32]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:02:0b.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev
08)
Subsystem: Creative Labs Gameport Joystick
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Region 0: I/O ports at d000 [size=8]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:02:0c.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev
74)
Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management NIC
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (2500ns min, 2500ns max), Cache Line Size: 0x04 (16 bytes)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at c880 [size=128]
Region 1: Memory at f7fff000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at f7fc0000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-

Thanks in advance for any pointers!

Jeremy

--
http://www.jerryweb.org/ : JerryWeb.org
http://sailcut.sourceforge.net/ : Sailcut CAD
http://mpf70.sourceforge.net/ : MPman MP-F70 support for Linux
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-07-06 16:40    [W:0.099 / U:0.472 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site