lkml.org 
[lkml]   [2005]   [Apr]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH] X86_64: fix hpet for systems that don't support legacy replacement (v. A2)
From
Date
Andrew, All,
Currently the x86-64 HPET code assumes the entire HPET implementation
from the spec is present. This breaks on boxes that do not implement the
optional legacy timer replacement functionality portion of the spec.

This patch fixes this issue, allowing x86-64 systems that cannot use the
HPET for the timer interrupt and RTC to still use the HPET as a time
source. I've tested this patch on a system systems without HPET, with
HPET but without legacy timer replacement, as well as HPET with legacy
timer replacement.

I'm currently working on a similar patch for i386.

Please consider for your tree.

thanks
-john

Changelog:
A0: First sent to lkml
A1: Implemented suggestions from Venkatesh
A2: Whitespace cleanup.

linux-2.6.12-rc2_hpet-nolegacy-fix_A2.patch
===========================================
diff -Nru a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c
--- a/arch/x86_64/kernel/time.c 2005-04-19 18:28:49 -07:00
+++ b/arch/x86_64/kernel/time.c 2005-04-19 18:28:49 -07:00
@@ -60,6 +60,7 @@
unsigned int cpu_khz; /* TSC clocks / usec, not used here */
static unsigned long hpet_period; /* fsecs / HPET clock */
unsigned long hpet_tick; /* HPET clocks / interrupt */
+static int hpet_use_timer;
unsigned long vxtime_hz = PIT_TICK_RATE;
int report_lost_ticks; /* command line option */
unsigned long long monotonic_base;
@@ -297,7 +298,7 @@

last_offset = vxtime.last;
base = monotonic_base;
- this_offset = hpet_readl(HPET_T0_CMP) - hpet_tick;
+ this_offset = hpet_readl(HPET_COUNTER);

} while (read_seqretry(&xtime_lock, seq));
offset = (this_offset - last_offset);
@@ -373,7 +374,14 @@

write_seqlock(&xtime_lock);

- if (vxtime.hpet_address) {
+ if (vxtime.hpet_address)
+ offset = hpet_readl(HPET_COUNTER);
+
+ if (hpet_use_timer) {
+ /* if we're using the hpet timer functionality,
+ * we can more accurately know the counter value
+ * when the timer interrupt occured.
+ */
offset = hpet_readl(HPET_T0_CMP) - hpet_tick;
delay = hpet_readl(HPET_COUNTER) - offset;
} else {
@@ -794,17 +802,18 @@
* Set up timer 0, as periodic with first interrupt to happen at hpet_tick,
* and period also hpet_tick.
*/
-
- hpet_writel(HPET_TN_ENABLE | HPET_TN_PERIODIC | HPET_TN_SETVAL |
+ if (hpet_use_timer) {
+ hpet_writel(HPET_TN_ENABLE | HPET_TN_PERIODIC | HPET_TN_SETVAL |
HPET_TN_32BIT, HPET_T0_CFG);
- hpet_writel(hpet_tick, HPET_T0_CMP);
- hpet_writel(hpet_tick, HPET_T0_CMP); /* AK: why twice? */
-
+ hpet_writel(hpet_tick, HPET_T0_CMP);
+ hpet_writel(hpet_tick, HPET_T0_CMP); /* AK: why twice? */
+ cfg |= HPET_CFG_LEGACY;
+ }
/*
* Go!
*/

- cfg |= HPET_CFG_ENABLE | HPET_CFG_LEGACY;
+ cfg |= HPET_CFG_ENABLE;
hpet_writel(cfg, HPET_CFG);

return 0;
@@ -825,8 +834,7 @@

id = hpet_readl(HPET_ID);

- if (!(id & HPET_ID_VENDOR) || !(id & HPET_ID_NUMBER) ||
- !(id & HPET_ID_LEGSUP))
+ if (!(id & HPET_ID_VENDOR) || !(id & HPET_ID_NUMBER))
return -1;

hpet_period = hpet_readl(HPET_PERIOD);
@@ -836,6 +844,8 @@
hpet_tick = (1000000000L * (USEC_PER_SEC / HZ) + hpet_period / 2) /
hpet_period;

+ hpet_use_timer = (id & HPET_ID_LEGSUP);
+
return hpet_timer_stop_set_go(hpet_tick);
}

@@ -892,9 +902,11 @@
set_normalized_timespec(&wall_to_monotonic,
-xtime.tv_sec, -xtime.tv_nsec);

- if (!hpet_init()) {
+ if (!hpet_init())
vxtime_hz = (1000000000000000L + hpet_period / 2) /
hpet_period;
+
+ if (hpet_use_timer) {
cpu_khz = hpet_calibrate_tsc();
timename = "HPET";
} else {
@@ -940,12 +952,12 @@
if (oem_force_hpet_timer())
notsc = 1;
if (vxtime.hpet_address && notsc) {
- timetype = "HPET";
+ timetype = hpet_use_timer ? "HPET" : "PIT/HPET";
vxtime.last = hpet_readl(HPET_T0_CMP) - hpet_tick;
vxtime.mode = VXTIME_HPET;
do_gettimeoffset = do_gettimeoffset_hpet;
} else {
- timetype = vxtime.hpet_address ? "HPET/TSC" : "PIT/TSC";
+ timetype = hpet_use_timer ? "HPET/TSC" : "PIT/TSC";
vxtime.mode = VXTIME_TSC;
}


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-04-20 03:45    [W:0.056 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site