lkml.org 
[lkml]   [2005]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[2.6 patch] drivers/video/: possible cleanups
This patch contains the possible cleanups including the following:
- every file should #include the headers containing the prototypes for
it's global functions
- make needlessly global functions static
- kyro/STG4000Interface.h: #include video/kyro.h and linux/pci.h
instead of a manual "struct pci_dev"
- i810_main.{c,h}: prototypes for static functions belong to the
C file

This patch was already ACK'ed by Antonino A. Daplas.


Signed-off-by: Adrian Bunk <bunk@stusta.de>

---

This patch was already sent on:
- 6 Nov 2005

drivers/video/arcfb.c | 8 +--
drivers/video/console/softcursor.c | 2
drivers/video/i810/i810-i2c.c | 1
drivers/video/i810/i810_accel.c | 1
drivers/video/i810/i810_gtf.c | 1
drivers/video/i810/i810_main.c | 51 ++++++++++++++++++--
drivers/video/i810/i810_main.h | 56 +---------------------
drivers/video/kyro/STG4000InitDevice.c | 1
drivers/video/kyro/STG4000Interface.h | 3 -
drivers/video/kyro/STG4000OverlayDevice.c | 1
drivers/video/matrox/matroxfb_g450.c | 2
drivers/video/nvidia/nv_hw.c | 1
drivers/video/tdfxfb.c | 2
13 files changed, 68 insertions(+), 62 deletions(-)

--- linux-2.6.14-rc5-mm1-full/drivers/video/console/softcursor.c.old 2005-11-06 00:31:15.000000000 +0100
+++ linux-2.6.14-rc5-mm1-full/drivers/video/console/softcursor.c 2005-11-06 00:31:30.000000000 +0100
@@ -17,6 +17,8 @@
#include <asm/uaccess.h>
#include <asm/io.h>

+#include "fbcon.h"
+
int soft_cursor(struct fb_info *info, struct fb_cursor *cursor)
{
unsigned int scan_align = info->pixmap.scan_align - 1;
--- linux-2.6.14-rc5-mm1-full/drivers/video/kyro/STG4000Interface.h.old 2005-11-06 00:41:04.000000000 +0100
+++ linux-2.6.14-rc5-mm1-full/drivers/video/kyro/STG4000Interface.h 2005-11-06 00:42:17.000000000 +0100
@@ -11,7 +11,8 @@
#ifndef _STG4000INTERFACE_H
#define _STG4000INTERFACE_H

-struct pci_dev;
+#include <linux/pci.h>
+#include <video/kyro.h>

/*
* Ramdac Setup
--- linux-2.6.14-rc5-mm1-full/drivers/video/kyro/STG4000OverlayDevice.c.old 2005-11-06 00:31:51.000000000 +0100
+++ linux-2.6.14-rc5-mm1-full/drivers/video/kyro/STG4000OverlayDevice.c 2005-11-06 00:32:03.000000000 +0100
@@ -14,6 +14,7 @@
#include <linux/types.h>

#include "STG4000Reg.h"
+#include "STG4000Interface.h"

/* HW Defines */

--- linux-2.6.14-rc5-mm1-full/drivers/video/kyro/STG4000InitDevice.c.old 2005-11-06 00:32:22.000000000 +0100
+++ linux-2.6.14-rc5-mm1-full/drivers/video/kyro/STG4000InitDevice.c 2005-11-06 00:32:37.000000000 +0100
@@ -15,6 +15,7 @@
#include <linux/pci.h>

#include "STG4000Reg.h"
+#include "STG4000Interface.h"

/* SDRAM fixed settings */
#define SDRAM_CFG_0 0x49A1
--- linux-2.6.14-rc5-mm1-full/drivers/video/matrox/matroxfb_g450.c.old 2005-11-06 00:33:03.000000000 +0100
+++ linux-2.6.14-rc5-mm1-full/drivers/video/matrox/matroxfb_g450.c 2005-11-06 00:33:19.000000000 +0100
@@ -20,6 +20,8 @@
#include <asm/uaccess.h>
#include <asm/div64.h>

+#include "matroxfb_g450.h"
+
/* Definition of the various controls */
struct mctl {
struct v4l2_queryctrl desc;
--- linux-2.6.14-rc5-mm1-full/drivers/video/nvidia/nv_hw.c.old 2005-11-06 00:33:52.000000000 +0100
+++ linux-2.6.14-rc5-mm1-full/drivers/video/nvidia/nv_hw.c 2005-11-06 00:34:04.000000000 +0100
@@ -52,6 +52,7 @@
#include <linux/pci.h>
#include "nv_type.h"
#include "nv_local.h"
+#include "nv_proto.h"

void NVLockUnlock(struct nvidia_par *par, int Lock)
{
--- linux-2.6.14-rc5-mm1-full/drivers/video/arcfb.c.old 2005-11-06 00:34:25.000000000 +0100
+++ linux-2.6.14-rc5-mm1-full/drivers/video/arcfb.c 2005-11-06 00:35:14.000000000 +0100
@@ -365,7 +365,8 @@
}
}

-void arcfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
+static void arcfb_fillrect(struct fb_info *info,
+ const struct fb_fillrect *rect)
{
struct arcfb_par *par = info->par;

@@ -375,7 +376,8 @@
arcfb_lcd_update(par, rect->dx, rect->dy, rect->width, rect->height);
}

-void arcfb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
+static void arcfb_copyarea(struct fb_info *info,
+ const struct fb_copyarea *area)
{
struct arcfb_par *par = info->par;

@@ -385,7 +387,7 @@
arcfb_lcd_update(par, area->dx, area->dy, area->width, area->height);
}

-void arcfb_imageblit(struct fb_info *info, const struct fb_image *image)
+static void arcfb_imageblit(struct fb_info *info, const struct fb_image *image)
{
struct arcfb_par *par = info->par;

--- linux-2.6.14-rc5-mm1-full/drivers/video/tdfxfb.c.old 2005-11-06 00:35:47.000000000 +0100
+++ linux-2.6.14-rc5-mm1-full/drivers/video/tdfxfb.c 2005-11-06 00:35:53.000000000 +0100
@@ -1307,7 +1307,7 @@
}

#ifndef MODULE
-void tdfxfb_setup(char *options)
+static void tdfxfb_setup(char *options)
{
char* this_opt;

--- linux-2.6.14-rc5-mm1-full/drivers/video/i810/i810_main.h.old 2005-11-06 00:36:28.000000000 +0100
+++ linux-2.6.14-rc5-mm1-full/drivers/video/i810/i810_main.h 2005-11-06 00:50:45.000000000 +0100
@@ -14,55 +14,6 @@
#ifndef __I810_MAIN_H__
#define __I810_MAIN_H__

-static int __devinit i810fb_init_pci (struct pci_dev *dev,
- const struct pci_device_id *entry);
-static void __exit i810fb_remove_pci(struct pci_dev *dev);
-static int i810fb_resume(struct pci_dev *dev);
-static int i810fb_suspend(struct pci_dev *dev, pm_message_t state);
-
-/*
- * voffset - framebuffer offset in MiB from aperture start address. In order for
- * the driver to work with X, we must try to use memory holes left untouched by X. The
- * following table lists where X's different surfaces start at.
- *
- * ---------------------------------------------
- * : : 64 MiB : 32 MiB :
- * ----------------------------------------------
- * : FrontBuffer : 0 : 0 :
- * : DepthBuffer : 48 : 16 :
- * : BackBuffer : 56 : 24 :
- * ----------------------------------------------
- *
- * So for chipsets with 64 MiB Aperture sizes, 32 MiB for v_offset is okay, allowing up to
- * 15 + 1 MiB of Framebuffer memory. For 32 MiB Aperture sizes, a v_offset of 8 MiB should
- * work, allowing 7 + 1 MiB of Framebuffer memory.
- * Note, the size of the hole may change depending on how much memory you allocate to X,
- * and how the memory is split up between these surfaces.
- *
- * Note: Anytime the DepthBuffer or FrontBuffer is overlapped, X would still run but with
- * DRI disabled. But if the Frontbuffer is overlapped, X will fail to load.
- *
- * Experiment with v_offset to find out which works best for you.
- */
-static u32 v_offset_default __initdata; /* For 32 MiB Aper size, 8 should be the default */
-static u32 voffset __initdata = 0;
-
-static int i810fb_cursor(struct fb_info *info, struct fb_cursor *cursor);
-
-/* Chipset Specific Functions */
-static int i810fb_set_par (struct fb_info *info);
-static int i810fb_getcolreg (u8 regno, u8 *red, u8 *green, u8 *blue,
- u8 *transp, struct fb_info *info);
-static int i810fb_setcolreg (unsigned regno, unsigned red, unsigned green, unsigned blue,
- unsigned transp, struct fb_info *info);
-static int i810fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info);
-static int i810fb_blank (int blank_mode, struct fb_info *info);
-
-/* Initialization */
-static void i810fb_release_resource (struct fb_info *info, struct i810fb_par *par);
-extern int __init agp_intel_init(void);
-
-
/* Video Timings */
extern void round_off_xres (u32 *xres);
extern void round_off_yres (u32 *xres, u32 *yres);
@@ -101,7 +52,7 @@

/* Conditionals */
#ifdef CONFIG_X86
-inline void flush_cache(void)
+static inline void flush_cache(void)
{
asm volatile ("wbinvd":::"memory");
}
@@ -110,7 +61,9 @@
#endif

#ifdef CONFIG_MTRR
-#define KERNEL_HAS_MTRR 1
+
+#include <asm/mtrr.h>
+
static inline void __devinit set_mtrr(struct i810fb_par *par)
{
par->mtrr_reg = mtrr_add((u32) par->aperture.physical,
@@ -128,7 +81,6 @@
par->aperture.size);
}
#else
-#define KERNEL_HAS_MTRR 0
#define set_mtrr(x) printk("set_mtrr: MTRR is disabled in the kernel\n")

#define unset_mtrr(x) do { } while (0)
--- linux-2.6.14-rc5-mm1-full/drivers/video/i810/i810_main.c.old 2005-11-06 00:44:20.000000000 +0100
+++ linux-2.6.14-rc5-mm1-full/drivers/video/i810/i810_main.c 2005-11-06 00:50:48.000000000 +0100
@@ -45,17 +45,58 @@

#include <asm/io.h>
#include <asm/div64.h>
-
-#ifdef CONFIG_MTRR
-#include <asm/mtrr.h>
-#endif
-
#include <asm/page.h>

#include "i810_regs.h"
#include "i810.h"
#include "i810_main.h"

+/*
+ * voffset - framebuffer offset in MiB from aperture start address. In order for
+ * the driver to work with X, we must try to use memory holes left untouched by X. The
+ * following table lists where X's different surfaces start at.
+ *
+ * ---------------------------------------------
+ * : : 64 MiB : 32 MiB :
+ * ----------------------------------------------
+ * : FrontBuffer : 0 : 0 :
+ * : DepthBuffer : 48 : 16 :
+ * : BackBuffer : 56 : 24 :
+ * ----------------------------------------------
+ *
+ * So for chipsets with 64 MiB Aperture sizes, 32 MiB for v_offset is okay, allowing up to
+ * 15 + 1 MiB of Framebuffer memory. For 32 MiB Aperture sizes, a v_offset of 8 MiB should
+ * work, allowing 7 + 1 MiB of Framebuffer memory.
+ * Note, the size of the hole may change depending on how much memory you allocate to X,
+ * and how the memory is split up between these surfaces.
+ *
+ * Note: Anytime the DepthBuffer or FrontBuffer is overlapped, X would still run but with
+ * DRI disabled. But if the Frontbuffer is overlapped, X will fail to load.
+ *
+ * Experiment with v_offset to find out which works best for you.
+ */
+static u32 v_offset_default __initdata; /* For 32 MiB Aper size, 8 should be the default */
+static u32 voffset __initdata = 0;
+
+static int i810fb_cursor(struct fb_info *info, struct fb_cursor *cursor);
+static int __devinit i810fb_init_pci (struct pci_dev *dev,
+ const struct pci_device_id *entry);
+static void __exit i810fb_remove_pci(struct pci_dev *dev);
+static int i810fb_resume(struct pci_dev *dev);
+static int i810fb_suspend(struct pci_dev *dev, pm_message_t state);
+
+/* Chipset Specific Functions */
+static int i810fb_set_par (struct fb_info *info);
+static int i810fb_getcolreg (u8 regno, u8 *red, u8 *green, u8 *blue,
+ u8 *transp, struct fb_info *info);
+static int i810fb_setcolreg (unsigned regno, unsigned red, unsigned green, unsigned blue,
+ unsigned transp, struct fb_info *info);
+static int i810fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info);
+static int i810fb_blank (int blank_mode, struct fb_info *info);
+
+/* Initialization */
+static void i810fb_release_resource (struct fb_info *info, struct i810fb_par *par);
+
/* PCI */
static const char *i810_pci_list[] __devinitdata = {
"Intel(R) 810 Framebuffer Device" ,
--- linux-2.6.14-rc5-mm1-full/drivers/video/i810/i810_accel.c.old 2005-11-06 00:36:57.000000000 +0100
+++ linux-2.6.14-rc5-mm1-full/drivers/video/i810/i810_accel.c 2005-11-06 00:37:11.000000000 +0100
@@ -14,6 +14,7 @@

#include "i810_regs.h"
#include "i810.h"
+#include "i810_main.h"

static u32 i810fb_rop[] = {
COLOR_COPY_ROP, /* ROP_COPY */
--- linux-2.6.14-rc5-mm1-full/drivers/video/i810/i810_gtf.c.old 2005-11-06 00:37:27.000000000 +0100
+++ linux-2.6.14-rc5-mm1-full/drivers/video/i810/i810_gtf.c 2005-11-06 00:37:58.000000000 +0100
@@ -14,6 +14,7 @@

#include "i810_regs.h"
#include "i810.h"
+#include "i810_main.h"

/*
* FIFO and Watermark tables - based almost wholly on i810_wmark.c in
--- linux-2.6.14-rc5-mm1-full/drivers/video/i810/i810-i2c.c.old 2005-11-06 00:38:16.000000000 +0100
+++ linux-2.6.14-rc5-mm1-full/drivers/video/i810/i810-i2c.c 2005-11-06 00:38:30.000000000 +0100
@@ -17,6 +17,7 @@
#include <linux/fb.h>
#include "i810.h"
#include "i810_regs.h"
+#include "i810_main.h"
#include "../edid.h"

#define I810_DDC 0x50
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-11-18 04:39    [W:0.402 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site