lkml.org 
[lkml]   [2005]   [Jan]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 2.6] I2C: Prevent buffer overflow on SMBus block read in i2c-viapro
Hi Greg, Linus, all,

I just hit a buffer overflow while playing around with i2cdump and
i2c-viapro through i2c-dev. This is caused by a missing length check on
a buffer operation when doing a SMBus block read in the i2c-viapro
driver. The problem was already known and had been fixed upon report by
Sergey Vlasov back in August 2003 in lm_sensors (2.4 kernel version of
the driver) but for some reason it was never ported to the 2.6 kernel
version.

I am not a security expert but I would guess that such a buffer overflow
could possibly be used to run arbitrary code in kernel space from user
space through i2c-dev. The severity obviously depends on the permisions
set on the i2c device files in /dev. Maybe it wouldn't be a bad idea to
push this patch upstream rather sooner than later.

While I was at it, I also changed a similar size check (for SMBus block
write this time) in the same driver to use the correct constant
I2C_SMBUS_BLOCK_MAX instead of its current numerical value. This doesn't
change a thing at the moment but prevents another potential buffer
overflow in case the value of I2C_SMBUS_BLOCK_MAX were to be changed in
the future (admittedly unlikely though).

Thanks.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

--- linux-2.6.11-rc1-bk8/drivers/i2c/busses/i2c-viapro.c.orig 2005-01-21 20:05:05.000000000 +0100
+++ linux-2.6.11-rc1-bk8/drivers/i2c/busses/i2c-viapro.c 2005-01-25 21:45:01.000000000 +0100
@@ -233,8 +233,8 @@
len = data->block[0];
if (len < 0)
len = 0;
- if (len > 32)
- len = 32;
+ if (len > I2C_SMBUS_BLOCK_MAX)
+ len = I2C_SMBUS_BLOCK_MAX;
outb_p(len, SMBHSTDAT0);
i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */
for (i = 1; i <= len; i++)
@@ -268,6 +268,8 @@
break;
case VT596_BLOCK_DATA:
data->block[0] = inb_p(SMBHSTDAT0);
+ if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
+ data->block[0] = I2C_SMBUS_BLOCK_MAX;
i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */
for (i = 1; i <= data->block[0]; i++)
data->block[i] = inb_p(SMBBLKDAT);

--
Jean Delvare
http://khali.linux-fr.org/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:09    [W:0.055 / U:0.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site