Messages in this thread Patch in this message | | | Subject | [PATCH] Fix for spurious interrupts on e100 resume | From | Jeremy Fitzhardinge <> | Date | Thu, 09 Sep 2004 15:36:08 -0700 |
| |
I've been having problems with spurious interrupts being raised when the e100 driver resets the chip during a resume: irq 11: nobody cared! [<c0105937>] dump_stack+0x17/0x20 [<c0107457>] __report_bad_irq+0x27/0x90 [<c0107a1b>] note_interrupt+0x6b/0x1f0 [<c0108132>] do_IRQ+0x272/0x360 [<c010533c>] common_interrupt+0x18/0x20 [<c012732b>] do_softirq+0x2b/0x30 [<c01080d7>] do_IRQ+0x217/0x360 [<c010533c>] common_interrupt+0x18/0x20 [<c01f7d4c>] __delay+0xc/0x10 [<f8b4806b>] e100_hw_reset+0x6b/0x90 [e100] [<f8b48d70>] e100_hw_init+0x10/0x1490 [e100] [<f8b4cd9f>] e100_up+0x3f/0x2e0 [e100] [<f8b4f11f>] e100_resume+0x8f/0xb0 [e100] [<c01fca62>] pci_device_resume+0x22/0x30 [<c023736a>] resume_device+0x1a/0x20 [<c02373dd>] dpm_resume+0x6d/0x70 [<c02373fc>] device_resume+0x1c/0x30 [<c01150d0>] suspend+0x540/0x7c0 [<c0115e33>] do_ioctl+0x123/0x180 [<c0185397>] sys_ioctl+0xb7/0x210 [<c010497d>] sysenter_past_esp+0x52/0x71 handlers: [<c02782c0>] (yenta_interrupt+0x0/0x30) [<f89c3310>] (radeon_driver_irq_handler+0x0/0xb0 [radeon]) [<f88c9320>] (usb_hcd_irq+0x0/0x60 [usbcore]) Disabling IRQ #11
The interrupt seems to be generated during the [um]sleep after one of the writel's in e100_hw_reset. To fix this, I simply moved the call to e100_disable_irq() to be first in the function, which seems to work well.
J
Patch:
On resume, the e100 chip seems to raise an interrupt during chip reset. Since there's no IRQ handler registered yet, the kernel complains that "nobody cared" about the interrupt. This change moves the call to e100_disable_irq to be first in e100_hw_reset() so there are no spurious interrupts.
drivers/net/e100.c | 7 ++++--- 1 files changed, 4 insertions(+), 3 deletions(-)
diff -puN drivers/net/e100.c~e100-restore-irq drivers/net/e100.c --- local-2.6/drivers/net/e100.c~e100-restore-irq 2004-09-09 12:52:33.000000000 -0700 +++ local-2.6-jeremy/drivers/net/e100.c 2004-09-09 12:53:18.000000000 -0700 @@ -587,6 +587,10 @@ static inline void e100_disable_irq(stru static void e100_hw_reset(struct nic *nic) { + /* Mask off our interrupt line - it's unmasked after reset + Do it early to prevent spurious interrupts. */ + e100_disable_irq(nic); + /* Put CU and RU into idle with a selective reset to get * device off of PCI bus */ writel(selective_reset, &nic->csr->port); @@ -605,9 +609,6 @@ static void e100_hw_reset(struct nic *ni writeb(cuc_load_base, &nic->csr->scb.cmd_lo); mdelay(20); } - - /* Mask off our interrupt line - it's unmasked after reset */ - e100_disable_irq(nic); } static int e100_self_test(struct nic *nic) _ Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |