Messages in this thread | | | Date | Wed, 14 Jul 2004 05:17:31 -0700 (PDT) | From | Hlaing Oo <> | Subject | missing cdrom in new kernel 2.4.26 |
| |
dear all I am newbie of kernel rebuilder. I could rebuild 2.4.26 from 2.4.20-8. Almost everything okay, but cdrom. When I mount cdrom I got this message.
# mount -t iso9660 /dev/hdc /mnt/cdrom mount: /dev/hdc is not a valid block device
New and old dmesg are below. At the end of the new dmesg is differ from old dmesg. Help me to fix. Regards
#cat /etc/fstab LABEL=/ / ext3 defaults 1 1 LABEL=/boot /boot ext3 defaults 1 2 none /dev/pts devpts gid=5,mode=620 0 0 none /proc proc defaults 0 0 none /dev/shm tmpfs defaults 0 0 /dev/hda3 swap swap defaults 0 0 /dev/cdrom /mnt/cdrom udf,iso9660 noauto,owner,kudzu,ro 0 0
>>>>> my new kernel dmesg is below
#cat /var/log/dmesg Linux version 2.4.26 (root@localhost.localdomain) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #3 SMP Wed Jul 14 06:55:41 EDT 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000eac00 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000003ff0000 (usable) BIOS-e820: 0000000003ff0000 - 0000000003fff800 (ACPI data) BIOS-e820: 0000000003fff800 - 0000000004000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 63MB LOWMEM available. On node 0 totalpages: 16368 zone(0): 4096 pages. zone(1): 12272 pages. zone(2): 0 pages. ACPI disabled because your bios is from 00 and too old You can enable it with acpi=force Sony Vaio laptop detected. BIOS strings suggest APM reports battery life in minutes and wrong byte order. Kernel command line: ro root=/dev/hda2 hdc=ide-scsi ide_setup: hdc=ide-scsi Local APIC disabled by BIOS -- reenabling. Could not enable APIC! Initializing CPU#0 Detected 496.319 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 989.59 BogoMIPS Memory: 61420k/65472k available (1782k kernel code, 3664k reserved, 604k data, 124k init, 0k highmem) Dentry cache hash table entries: 8192 (order: 4, 65536 bytes) Inode cache hash table entries: 4096 (order: 3, 32768 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 CPU: Common caps: 0383f9ff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 CPU: Common caps: 0383f9ff 00000000 00000000 00000000 CPU0: Intel Celeron (Coppermine) stepping 01 per-CPU timeslice cutoff: 365.42 usecs. SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Waiting on wait_init_idle (map = 0x0) All processors have done init_idle PCI: PCI BIOS revision 2.10 entry at 0xfd99e, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router PIIX/ICH [8086/7110] at 00:07.0 PCI: Found IRQ 9 for device 00:0c.0 Limiting direct PCI/PCI transfers. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Journalled Block Device driver loaded Installing knfsd (copyright (C) 1996 okir@monad.swb.de). pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). loop: loaded (max 8 devices) PPP generic driver version 2.4.2 PPP Deflate Compression module registered Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 27M agpgart: Detected Intel 440BX chipset agpgart: AGP aperture is 16M @ 0x40000000 [drm] Initialized tdfx 1.0.0 20010216 on minor 0 [drm] AGP 0.99 Aperture @ 0x40000000 16MB [drm] Initialized radeon 1.7.0 20020828 on minor 1 [drm] AGP 0.99 Aperture @ 0x40000000 16MB [drm] Initialized i810 1.2.1 20020211 on minor 2 Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx hda: IBM-DARA-212000, ATA DISK drive hdc: UJDA310, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 23579136 sectors (12073 MB) w/418KiB Cache, CHS=1467/255/63 Partition check: hda: hda1 hda2 hda3 SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Found IRQ 9 for device 00:0c.0 PCI: Assigned IRQ 9 for device 00:0c.1 PCI: Sharing IRQ 9 with 00:0a.0 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 4096) IPv4 over IPv4 tunneling driver Yenta ISA IRQ mask 0x0c98, PCI irq 9 Socket status: 30000410 Yenta ISA IRQ mask 0x0c98, PCI irq 9 Socket status: 30000006 NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 124k freed EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal Adding Swap: 192772k swap-space (priority -1) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal EXT3-fs: mounted filesystem with ordered data mode.
>>>> my old kernel dmesg is below
#cat dmesg20-8 Linux version 2.4.20-8 (bhcompile@porky.devel.redhat.com) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000eac00 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000003ff0000 (usable) BIOS-e820: 0000000003ff0000 - 0000000003fff800 (ACPI data) BIOS-e820: 0000000003fff800 - 0000000004000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 63MB LOWMEM available. On node 0 totalpages: 16368 zone(0): 4096 pages. zone(1): 12272 pages. zone(2): 0 pages. Sony Vaio laptop detected. BIOS strings suggest APM reports battery life in minutes and wrong byte order. Kernel command line: ro root=LABEL=/ hdc=ide-scsi ide_setup: hdc=ide-scsi Initializing CPU#0 Detected 496.314 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 989.59 BogoMIPS Memory: 60568k/65472k available (1347k kernel code, 4008k reserved, 999k data, 132k init, 0k highmem) Dentry cache hash table entries: 8192 (order: 4, 65536 bytes) Inode cache hash table entries: 4096 (order: 3, 32768 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 CPU: Common caps: 0383f9ff 00000000 00000000 00000000 CPU: Intel Celeron (Coppermine) stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfd99e, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 PCI: Found IRQ 9 for device 00:0c.0 Limiting direct PCI/PCI transfers. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) Starting kswapd VFS: Disk quotas vdquot_6.5.1 pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS0 at 0x03f8 (irq = 4) is a 16550A Real Time Clock Driver v1.10e Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 00:07.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfcf0-0xfcf7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfcf8-0xfcff, BIOS settings: hdc:DMA, hdd:pio hda: IBM-DARA-212000, ATA DISK drive blk: queue c03c9f40, I/O limit 4095Mb (mask 0xffffffff) hdc: UJDA310, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: host protected area => 1 hda: 23579136 sectors (12073 MB) w/418KiB Cache, CHS=1467/255/63, UDMA(33) ide-floppy driver 0.99.newide Partition check: hda: hda1 hda2 hda3 ide-floppy driver 0.99.newide md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 8192) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 145k freed VFS: Mounted root (ext2 filesystem). Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 132k freed EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal Adding Swap: 192772k swap-space (priority -1) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: MATSHITA Model: UJDA310 Rev: 1.34 Type: CD-ROM ANSI SCSI revision: 02
__________________________________ Do you Yahoo!? Yahoo! Mail is new and improved - Check it out! http://promotions.yahoo.com/new_mail - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |