lkml.org 
[lkml]   [2004]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
Subject[PATCH 2.6] i2c-nforce2.c add support for nForce3 Pro 150 MCP
From
Hi Greg,

This patch applies to linux 2.6.10-RC1. I tried to follow the procedures
in Documentation/SubmittingPatches and I hope I got everything right.

Signed-off-by: Thomas Leibold <thomas@plx.com>

Thanks
Thomas

>
> Hi Thomas,
>
>> This patch adds recognition of the PCI-Id for the nForce3 Pro 150 MCP
>> to the i2c-nforce2.c bus driver. I have tested this simple patch on
>> ASUS A7N8X-deluxe (nforce2, i386) and ASUS SK8N (nforce3, x86-64).
>>
>> On the ASUS SK8N the hardware monitoring is done with a IT8712F-A chip
>> on the ISA bus, so the only use for accessing the 2 SMBUS interfaces
>> in the nForce3 MCP is to read the SPD eeprom in the memory modules.
>>
>> I don't know if this works for other chips in the nForce3 family.
>
> Patch looks good and simple, I'll apply it this evening.
>
> Would you consider providing a similar patch to Greg for Linux 2.6?
>
> Thanks,
> Jean
>
diff -uprN linux-2.6.10-rc1/drivers/i2c/busses/i2c-nforce2.c patched/drivers/i2c/busses/i2c-nforce2.c
--- linux-2.6.10-rc1/drivers/i2c/busses/i2c-nforce2.c 2004-11-16 10:22:09.728664352 -0800
+++ patched/drivers/i2c/busses/i2c-nforce2.c 2004-11-16 11:31:01.957470088 -0800
@@ -1,6 +1,7 @@
/*
SMBus driver for nVidia nForce2 MCP

+ Added nForce3 Pro 150 Thomas Leibold <thomas@plx.com>,
Ported to 2.5 Patrick Dreker <patrick@dreker.de>,
Copyright (c) 2003 Hans-Frieder Vogt <hfvogt@arcor.de>,
Based on
@@ -25,6 +26,7 @@
/*
SUPPORTED DEVICES PCI ID
nForce2 MCP 0064
+ nForce3 Pro150 MCP 00D4

This driver supports the 2 SMBuses that are included in the MCP2 of the
nForce2 chipset.
@@ -53,6 +55,10 @@ MODULE_DESCRIPTION("nForce2 SMBus driver
#define PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS 0x0064
#endif

+#ifndef PCI_DEVICE_ID_NVIDIA_NFORCE3_SMBUS
+#define PCI_DEVICE_ID_NVIDIA_NFORCE3_SMBUS 0x00D4
+#endif
+

struct nforce2_smbus {
struct pci_dev *dev;
@@ -294,6 +300,8 @@ static u32 nforce2_func(struct i2c_adapt
static struct pci_device_id nforce2_ids[] = {
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3_SMBUS,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ 0 }
};

diff -uprN linux-2.6.10-rc1/drivers/i2c/busses/Kconfig patched/drivers/i2c/busses/Kconfig
--- linux-2.6.10-rc1/drivers/i2c/busses/Kconfig 2004-11-16 10:22:09.723665112 -0800
+++ patched/drivers/i2c/busses/Kconfig 2004-11-16 11:01:18.162648120 -0800
@@ -205,6 +205,7 @@ config I2C_NFORCE2
help
If you say yes to this option, support will be included for the Nvidia
Nforce2 family of mainboard I2C interfaces.
+ This driver also supports the nForce3 Pro 150 MCP.

This driver can also be built as a module. If so, the module
will be called i2c-nforce2.
diff -uprN linux-2.6.10-rc1/include/linux/pci_ids.h patched/include/linux/pci_ids.h
--- linux-2.6.10-rc1/include/linux/pci_ids.h 2004-11-16 10:22:15.000000000 -0800
+++ patched/include/linux/pci_ids.h 2004-11-16 11:21:28.223690880 -0800
@@ -1081,6 +1081,7 @@
#define PCI_DEVICE_ID_NVIDIA_NVENET_8 0x0056
#define PCI_DEVICE_ID_NVIDIA_NVENET_9 0x0057
#define PCI_DEVICE_ID_NVIDIA_CK804_AUDIO 0x0059
+#define PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS 0x0064
#define PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE 0x0065
#define PCI_DEVICE_ID_NVIDIA_NVENET_2 0x0066
#define PCI_DEVICE_ID_NVIDIA_MCP2_AUDIO 0x006a
@@ -1092,6 +1093,7 @@
#define PCI_DEVICE_ID_NVIDIA_NFORCE3 0x00d1
#define PCI_DEVICE_ID_NVIDIA_MCP3_AUDIO 0x00da
#define PCI_DEVICE_ID_NVIDIA_NFORCE3S 0x00e1
+#define PCI_DEVICE_ID_NVIDIA_NFORCE3_SMBUS 0x00d4
#define PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE 0x00d5
#define PCI_DEVICE_ID_NVIDIA_NVENET_3 0x00d6
#define PCI_DEVICE_ID_NVIDIA_MCP3_AUDIO 0x00da
\
 
 \ /
  Last update: 2005-03-22 14:08    [W:0.048 / U:0.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site