Messages in this thread | | | From | iain@savagela ... | Subject | Lockups with stv680 driver and kernel-2.6.0-test1 | Date | Sun, 20 Jul 2003 21:47:59 +0100 |
| |
Hi,
I've recently bought a small cheap webcam (thought it would be fun). Anyway it appears to use the stv680 driver in linux. The camera works, but only for about 30secs then the usb controller seems to lock up as I loose the picture (it freezes) and I also loose the use of my mouse (usb mouse). A short while after this the machine generally grounds to a halt if I dont quit X to a console and reboot.
I have this problem in the 2.4 series of kernel to only the lockup occurs after about 5 secs. I did read somwhere that there are problems with the 2.4 kernel, the mentioned driver and the KT133 chipset from Via. I have a KT266 based motherboard which I believe is similar just a bit faster ;). Anyway I thought I should post here in the hopes that someone might have a solution.
Cheers
iain
p.s I have tried to include the relevent stuff below, is there anything else you guys need?
part of dmesg drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 uhci-hcd 0000:00:11.2: VIA Technologies, In USB uhci-hcd 0000:00:11.2: irq 5, io base 0000a800 uhci-hcd 0000:00:11.2: new USB bus registered, assigned bus number 1 hub 1-0:0: USB hub found hub 1-0:0: 2 ports detected uhci-hcd 0000:00:11.4: VIA Technologies, In USB (#2) uhci-hcd 0000:00:11.4: irq 5, io base 0000b000 uhci-hcd 0000:00:11.4: new USB bus registered, assigned bus number 2 hub 2-0:0: USB hub found hub 2-0:0: 2 ports detected Linux video capture interface: v1.00 registering 1-0290 hub 2-0:0: debounce: port 1: delay 100ms stable 4 status 0x101 hub 2-0:0: new USB device on port 1, assigned address 2 hub 2-0:0: debounce: port 2: delay 100ms stable 4 status 0x301 hub 2-0:0: new USB device on port 2, assigned address 3 input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:11.4-2 drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver
drivers/usb/media/stv680.c: [stv680_probe:1466] STV(i): STV0680 camera found. drivers/usb/media/stv680.c: [stv680_probe:1497] STV(i): registered new video device: video0 drivers/usb/core/usb.c: registered new driver stv680 drivers/usb/media/stv680.c: [usb_stv680_init:1573] STV(i): usb camera driver version v0.25 registering drivers/usb/media/stv680.c: STV0680 USB Camera Driver v0.25
lsusb Bus 002 Device 003: ID 045e:0047 Microsoft Corp. Bus 002 Device 002: ID 0553:0202 STMicroelectronics Imaging Division (VLSI Vision) Aiptek PenCam 1 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |