Messages in this thread | | | Date | Tue, 29 Apr 2003 18:49:13 +0200 | From | Gregoire Favre <> | Subject | no ZIP (250) with 2.4.21-rc1-ac3... |
| |
Hello,
I have first tried to boot it with the ZIP in the drive, but without sucess :-( Now, I have booted without a disk in the drive, and only got those errors:
Uniform Multi-Platform E-IDE driver Revision: 7.00beta3-.2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 00:1f.1 ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio hda: IC35L120AVVA07-0, ATA DISK drive hdb: IOMEGA ZIP 250 ATAPI, ATAPI FLOPPY drive blk: queue c03d3760, I/O limit 4095Mb (mask 0xffffffff) hdc: SONY DVD RW DRU-500A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 241254720 sectors (123522 MB) w/1863KiB Cache, CHS=15017/255/63, UDMA(100) hdb: attached ide-scsi driver. hdc: attached ide-scsi driver. Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 > hdb:<3>ide-scsi: hdb: unsupported command in request queue (0) end_request: I/O error, dev 03:40 (hdb), sector 0 ide-scsi: hdb: unsupported command in request queue (0) end_request: I/O error, dev 03:40 (hdb), sector 2 ide-scsi: hdb: unsupported command in request queue (0) end_request: I/O error, dev 03:40 (hdb), sector 4 ide-scsi: hdb: unsupported command in request queue (0) end_request: I/O error, dev 03:40 (hdb), sector 6 ide-scsi: hdb: unsupported command in request queue (0) end_request: I/O error, dev 03:40 (hdb), sector 0 ide-scsi: hdb: unsupported command in request queue (0) end_request: I/O error, dev 03:40 (hdb), sector 2 ide-scsi: hdb: unsupported command in request queue (0) end_request: I/O error, dev 03:40 (hdb), sector 4 ide-scsi: hdb: unsupported command in request queue (0) end_request: I/O error, dev 03:40 (hdb), sector 6 unable to read partition table SCSI subsystem driver Revision: 1.00 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.28 ... SCSI device sdb: 71687370 512-byte hdwr sectors (36704 MB) /dev/scsi/host0/bus0/target15/lun0: p1 p2 sdc : READ CAPACITY failed. sdc : status = 0, message = 00, host = 0, driver = 28 Current sd00:00: sns = 70 2 ASC=3a ASCQ= 0 Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 0xff 0xfe 0x01 0x03 0x31 0x01 0xce 0x5a sdc : block size assumed to be 512 bytes, disk size 1GB. /dev/scsi/host2/bus0/target0/lun0: I/O error: dev 08:20, sector 0 I/O error: dev 08:20, sector 0 unable to read partition table
I have an MSI Max2-BLR.
I don't know which other info I should send for this problem?
Grégoire ________________________________________________________________ http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |