lkml.org 
[lkml]   [2003]   [Apr]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject2.5.68 issues (X windows startup)


I havent booted 2.5.x for a while on this dusty old laptop.
Never had this issue in the past. Have a feeling its some basic
utility that maybe needed.

--
model name : Pentium III (Coppermine)
stepping : 10
cpu MHz : 696.996
cache size : 256 KB
---

128M RAM.

When i run 2.5.68 theres a feel of highly improved interactiveness.
Annoyingly- Starting X takes at least 3 minutes (this is about a factor of
10 worse than older 2.5 and current 2.4.21-pre5. I have tried a few
2.5.6x and they all seem to exhibit this problem. Havent tried going back
beyond that.

I cleared the profile before running X; started X and captured the
profile right after that. Dont know if its any help, but it is attached.

cheers,
jamal 19456 total 0.1304
17721 default_idle 316.4464
1411 run_timer_softirq 2.9643
62 do_softirq 0.2981
55 set_bitmap 0.2926
51 system_call 1.1591
25 general_protection 2.0833
18 __wake_up 0.1364
14 schedule 0.0106
11 save_v86_state 0.0281
10 sys_iopl 0.1042
9 do_sys_vm86 0.0296
9 do_page_fault 0.0087
8 add_wait_queue 0.0606
6 sys_ioperm 0.0205
5 remove_wait_queue 0.0431
5 handle_vm86_fault 0.0020
4 sys_vm86old 0.0152
4 rest_init 0.0345
3 error_code 0.0536
2 set_mtrr 0.0054
2 schedule_timeout 0.0116
2 enable_irq 0.0086
2 do_general_protection 0.0185
2 del_timer 0.0096
2 add_timer 0.0114
1 sys_gettimeofday 0.0063
1 sigprocmask 0.0032
1 resume_userspace 0.0417
1 release_task 0.0026
1 release_console_sem 0.0034
1 old_mmap 0.0033
1 mm_init 0.0036
1 mem_parity_error 0.0227
1 exit_notify 0.0006
1 do_gettimeofday 0.0064
1 del_timer_sync 0.0081
1 copy_process 0.0003
1 copy_files 0.0010
\
 
 \ /
  Last update: 2005-03-22 13:34    [W:0.121 / U:0.508 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site