Messages in this thread | | | From | Arkadiusz Miskiewicz <> | Subject | kernel-2.6.0-0.test9.cset20031029_0506.1 + oops | Date | Thu, 30 Oct 2003 23:41:55 +0100 |
| |
I'm using 2.6.0 test9 kernel with all changeset until cset20031029_0506.
Linux version 2.6.0 (misiek@arm.t19.ds.pwr.wroc.pl) (gcc version 3.3.2 (PLD Linux)) #1 Wed Oct 29 11:46:40 CET 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000cc000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000eff0000 (usable) BIOS-e820: 000000000eff0000 - 000000000eff8000 (ACPI data) BIOS-e820: 000000000eff8000 - 000000000f000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 239MB LOWMEM available. On node 0 totalpages: 61424 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 57328 pages, LIFO batch:13 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 AMI ) @ 0x000fa4a0 ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x0eff0000 ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x0eff0030 ACPI: BOOT (v001 AMIINT VIA_K7 0x00000009 MSFT 0x00000097) @ 0x0eff00c0 ACPI: DSDT (v001 VIA TwisterK 0x00001000 INTL 0x02002024) @ 0x00000000 Building zonelist for node : 0 Kernel command line: BOOT_IMAGE=pld-2.6.0 ro root=303 console=ttyS0,57600n81 console=tty0 video=vesafb:ywrap Initializing CPU#0 PID hash table entries: 1024 (order 10: 8192 bytes) Detected 1532.943 MHz processor. Console: colour dummy device 80x25 Memory: 239584k/245696k available (1717k kernel code, 5412k reserved, 683k data, 172k init, 0k highmem) Calibrating delay loop... 3022.84 BogoMIPS Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 187k freed CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD mobile AMD Athlon(tm) XP-M 1800+ stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfdb51, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20031002 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: Embedded Controller [EC0] (gpe 5) ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *9 10 11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 9 *10 11 14 15) ACPI: Power Resource [FN10] (on) Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00f7710 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x673b, dseg 0xf0000 PnPBIOS: Unknown tag '0x82', length '22'. PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found vesafb: framebuffer at 0xd0000000, mapped to 0xcf809000, size 15296k vesafb: mode is 1024x768x16, linelength=2048, pages=8 vesafb: protected mode interface info at c000:804e vesafb: pmi: set display start = c00c80d8, set palette = c00c8121 vesafb: scrolling: ywrap using protected mode interface, yres_virtual=7648 vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 fb0: VESA VGA frame buffer device SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x1 Machine check exception polling timer started. Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Initializing Cryptographic API Applying VIA southbridge workaround. Console: switching to colour frame buffer device 128x48 pty: 256 Unix98 ptys configured Serial: 8250/16550 driver $Revision: 1.90 $ 52 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:11.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt8231 (rev 10) IDE UDMA100 controller on pci0000:00:11.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio hda: TOSHIBA MK3021GAS, ATA DISK drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: Samsung CD-RW/DVD-ROM SN-324B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 58605120 sectors (30005 MB), CHS=58140/16/63, UDMA(100) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 Console: switching to colour frame buffer device 128x48 mice: PS/2 mouse device common for all mice i8042.c: Detected active multiplexing controller, rev 1.0. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 input: AT Translated Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S3 S4 S5) RAMDISK: Compressed image found at block 0 VFS: Mounted root (romfs filesystem) readonly. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Trying to move old root to /initrd ... failed Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 172k freed Adding 265064k swap on /dev/hda2. Priority:-1 extents:1 blk: queue c133d400, I/O limit 4095Mb (mask 0xffffffff) EXT3 FS on hda3, internal journal drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub Real Time Clock Driver v1.12 hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 There is already a security framework initialized, register_security failed. Failure registering capabilities with the kernel selinux_register_security: Registering secondary module capability Capability LSM initialized ACPI: AC Adapter [AC0] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI: Fan [FAN1] (off) ACPI: Processor [CPU1] (supports C1 C2) ACPI: Thermal Zone [THRM] (57 C) powernow: AMD K7 CPU detected. powernow: PowerNOW! Technology present. Can scale: frequency and voltage. powernow: Found PSB header at c00faf80 powernow: Table version: 0x12 powernow: Flags: 0x0 (Mobile voltage regulator) powernow: Settling Time: 100 microseconds. powernow: Has 86 PST tables. (Only dumping ones relevant to this CPU). powernow: PST:74 (@c00fb590) powernow: cpuid: 0x781 fsb: 133 maxFID: 0x1 startvid: 0xb powernow: FID: 0x6 (6.0x [798MHz]) VID: 0xd (1.350V) powernow: FID: 0x7 (6.5x [864MHz]) VID: 0xd (1.350V) powernow: FID: 0x9 (7.5x [997MHz]) VID: 0xd (1.350V) powernow: FID: 0xb (8.5x [1130MHz]) VID: 0xd (1.350V) powernow: FID: 0xd (9.5x [1263MHz]) VID: 0xd (1.350V) powernow: FID: 0xf (10.5x [1396MHz]) VID: 0xc (1.400V) powernow: FID: 0x1 (11.5x [1529MHz]) VID: 0xb (1.450V)
powernow: Minimum speed 798 MHz. Maximum speed 1529 MHz. input: PS/2 Generic Mouse on isa0060/serio2 PCI: Setting latency timer of device 0000:00:11.5 to 64 NET: Registered protocol family 23 IrCOMM protocol (Dag Brattli) NTFS driver 2.1.4 [Flags: R/W MODULE]. NTFS volume version 3.1. via-rhine.c:v1.10-LK1.1.19-2.5 July-12-2003 Written by Donald Becker http://www.scyld.com/network/via-rhine.html eth0: VIA VT6102 Rhine-II at 0xd000, 00:a0:cc:da:d9:3c, IRQ 9. eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 41e1. eth0: Setting full-duplex based on MII #1 link partner capability of 41e1. IrDA: Registered device irda0 Linux Kernel Card Services options: [pci] [cardbus] [pm] Yenta: CardBus bridge found at 0000:00:08.0 [1584:3000] Yenta: ISA IRQ list 0800, PCI irq5 Socket status: 30000007 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0800-0x08ff: excluding 0x800-0x87f cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x400-0x40f 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. ohci_hcd: 2003 Oct 13 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 uhci_hcd 0000:00:11.2: UHCI Host Controller uhci_hcd 0000:00:11.2: irq 10, io base 0000d400 uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd 0000:00:11.3: UHCI Host Controller uhci_hcd 0000:00:11.3: irq 10, io base 0000d800 uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected hub 1-0:1.0: new USB device on port 1, assigned address 2 drivers/usb/core/usb.c: registered new driver hiddev drivers/usb/input/hid-ff.c: hid_ff_init could not find initializer input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:11.2-1 drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver drivers/usb/core/usb.c: registered new driver usbmouse drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver NET: Registered protocol family 10 Disabled Privacy Extensions on device c0324500(lo) IPv6 over IPv4 tunneling driver mtrr: 0xd0000000,0x1000000 overlaps existing 0xd0000000,0x800000 eth0: no IPv6 routers present spurious 8259A interrupt: IRQ7. Debug: sleeping function called from invalid context at mm/slab.c:1856 in_atomic():1, irqs_disabled():0 Call Trace: [<c011dffb>] __might_sleep+0xab/0xf0 [<c01433df>] __kmalloc+0x8f/0xa0 [<c01b9a42>] acpi_os_allocate+0x10/0x14 [<c01cd53c>] acpi_ut_callocate+0x2f/0x73 [<c01c6fa7>] acpi_ns_internalize_name+0x43/0x77 [<c01c68ce>] acpi_ns_evaluate_relative+0x32/0xad [<c010cf40>] do_IRQ+0xc0/0x140 [<c010b4dc>] common_interrupt+0x18/0x20 [<c01c6232>] acpi_evaluate_object+0x103/0x1a5 [<c01d1066>] acpi_ec_query+0xa6/0xd3 [<c01d116a>] acpi_ec_gpe_query+0xd7/0xf1 [<c01bf163>] acpi_ev_gpe_dispatch+0x34/0x109 [<c01bf02b>] acpi_ev_gpe_detect+0xc2/0x110 [<c01bdbff>] acpi_ev_sci_xrupt_handler+0x13/0x1c [<c01b9b85>] acpi_irq+0xf/0x1a [<c010cbbb>] handle_IRQ_event+0x3b/0x70 [<c01b9b76>] acpi_irq+0x0/0x1a [<c010cf16>] do_IRQ+0x96/0x140 [<c010b4dc>] common_interrupt+0x18/0x20 [<d07b4257>] acpi_processor_idle+0xe9/0x1e5 [processor] [<c0105000>] rest_init+0x0/0x60 [<c01090e4>] cpu_idle+0x34/0x40 [<c035c735>] start_kernel+0x185/0x1c0 [<c035c480>] unknown_bootoption+0x0/0x100
Debug: sleeping function called from invalid context at mm/slab.c:1856 in_atomic():1, irqs_disabled():0 Call Trace: [<c011dffb>] __might_sleep+0xab/0xf0 [<c01433df>] __kmalloc+0x8f/0xa0 [<c01b9a42>] acpi_os_allocate+0x10/0x14 [<c01cd53c>] acpi_ut_callocate+0x2f/0x73 [<c01c6fa7>] acpi_ns_internalize_name+0x43/0x77 [<c01c68ce>] acpi_ns_evaluate_relative+0x32/0xad [<c010cf40>] do_IRQ+0xc0/0x140 [<c010b4dc>] common_interrupt+0x18/0x20 [<c01c6232>] acpi_evaluate_object+0x103/0x1a5 [<c01d1066>] acpi_ec_query+0xa6/0xd3 [<c01d116a>] acpi_ec_gpe_query+0xd7/0xf1 [<c01bf163>] acpi_ev_gpe_dispatch+0x34/0x109 [<c01bf02b>] acpi_ev_gpe_detect+0xc2/0x110 [<c01bdbff>] acpi_ev_sci_xrupt_handler+0x13/0x1c [<c01b9b85>] acpi_irq+0xf/0x1a [<c010cbbb>] handle_IRQ_event+0x3b/0x70 [<c01b9b76>] acpi_irq+0x0/0x1a [<c010cf16>] do_IRQ+0x96/0x140 [<c010b4dc>] common_interrupt+0x18/0x20 [<d07b4257>] acpi_processor_idle+0xe9/0x1e5 [processor] [<c0105000>] rest_init+0x0/0x60 [<c01090e4>] cpu_idle+0x34/0x40 [<c035c735>] start_kernel+0x185/0x1c0 [<c035c480>] unknown_bootoption+0x0/0x100
process `host' is using obsolete setsockopt SO_BSDCOMPAT eth0: Setting full-duplex based on MII #1 link partner capability of 41e1. eth0: no IPv6 routers present
Config and description of my hardware is available here: http://lkml.org/lkml/2003/10/25/94
I'm using the same config + I've started using vesafb. -- Arkadiusz Miśkiewicz CS at FoE, Wroclaw University of Technology arekm.pld-linux.org AM2-6BONE, 1024/3DB19BBD, arekm(at)ircnet, PLD/Linux - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |