lkml.org 
[lkml]   [2002]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject2.4.20pre5 trivial compiler warning fix for nsc-ircc.c
the attached patch fixes deprecated usage warnings for __FUNCTION__ in 
nsc-ircc.c.
--
Andreas Steinmetz
D.O.M. Datenverarbeitung GmbH
--- drivers/net/irda/nsc-ircc.c.orig 2002-09-05 23:14:05.000000000 +0200
+++ drivers/net/irda/nsc-ircc.c 2002-09-05 23:27:30.000000000 +0200
@@ -165,7 +165,7 @@

/* Probe for all the NSC chipsets we know about */
for (chip=chips; chip->name ; chip++) {
- IRDA_DEBUG(2, __FUNCTION__"(), Probing for %s ...\n",
+ IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __FUNCTION__,
chip->name);

/* Try all config registers for this chip */
@@ -183,8 +183,8 @@
/* Read index register */
reg = inb(cfg_base);
if (reg == 0xff) {
- IRDA_DEBUG(2, __FUNCTION__
- "() no chip at 0x%03x\n", cfg_base);
+ IRDA_DEBUG(2, "%s() no chip at 0x%03x\n",
+ __FUNCTION__, cfg_base);
continue;
}

@@ -192,8 +192,9 @@
outb(chip->cid_index, cfg_base);
id = inb(cfg_base+1);
if ((id & chip->cid_mask) == chip->cid_value) {
- IRDA_DEBUG(2, __FUNCTION__
- "() Found %s chip, revision=%d\n",
+ IRDA_DEBUG(2,
+ "%s() Found %s chip, revision=%d\n",
+ __FUNCTION__,
chip->name, id & ~chip->cid_mask);
/*
* If the user supplies the base address, then
@@ -209,8 +210,8 @@
ret = 0;
i++;
} else {
- IRDA_DEBUG(2, __FUNCTION__
- "(), Wrong chip id=0x%02x\n", id);
+ IRDA_DEBUG(2, "%s(), Wrong chip id=0x%02x\n",
+ __FUNCTION__, id);
}
}

@@ -253,7 +254,7 @@
void *ret;
int err;

- IRDA_DEBUG(2, __FUNCTION__ "()\n");
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);

MESSAGE("%s, Found chip at base=0x%03x\n", driver_name,
info->cfg_base);
@@ -266,8 +267,8 @@
/* Allocate new instance of the driver */
self = kmalloc(sizeof(struct nsc_ircc_cb), GFP_KERNEL);
if (self == NULL) {
- ERROR(__FUNCTION__ "(), can't allocate memory for "
- "control block!\n");
+ ERROR("%s(), can't allocate memory for "
+ "control block!\n", __FUNCTION__);
return -ENOMEM;
}
memset(self, 0, sizeof(struct nsc_ircc_cb));
@@ -288,7 +289,7 @@
/* Reserve the ioports that we need */
ret = request_region(self->io.fir_base, self->io.fir_ext, driver_name);
if (!ret) {
- WARNING(__FUNCTION__ "(), can't get iobase of 0x%03x\n",
+ WARNING("%s(), can't get iobase of 0x%03x\n", __FUNCTION__,
self->io.fir_base);
dev_self[i] = NULL;
kfree(self);
@@ -339,7 +340,7 @@
self->tx_fifo.tail = self->tx_buff.head;

if (!(dev = dev_alloc("irda%d", &err))) {
- ERROR(__FUNCTION__ "(), dev_alloc() failed!\n");
+ ERROR("%s(), dev_alloc() failed!\n", __FUNCTION__);
return -ENOMEM;
}

@@ -358,7 +359,7 @@
err = register_netdevice(dev);
rtnl_unlock();
if (err) {
- ERROR(__FUNCTION__ "(), register_netdev() failed!\n");
+ ERROR("%s(), register_netdev() failed!\n", __FUNCTION__);
return -1;
}
MESSAGE("IrDA: Registered device %s\n", dev->name);
@@ -395,7 +396,7 @@
{
int iobase;

- IRDA_DEBUG(4, __FUNCTION__ "()\n");
+ IRDA_DEBUG(4, "%s()\n", __FUNCTION__);

ASSERT(self != NULL, return -1;);

@@ -409,7 +410,7 @@
}

/* Release the PORT that this driver is using */
- IRDA_DEBUG(4, __FUNCTION__ "(), Releasing Region %03x\n",
+ IRDA_DEBUG(4, "%s(), Releasing Region %03x\n", __FUNCTION__,
self->io.fir_base);
release_region(self->io.fir_base, self->io.fir_ext);

@@ -447,7 +448,7 @@
case 0x2e8: outb(0x15, cfg_base+1); break;
case 0x3f8: outb(0x16, cfg_base+1); break;
case 0x2f8: outb(0x17, cfg_base+1); break;
- default: ERROR(__FUNCTION__ "(), invalid base_address");
+ default: ERROR("%s(), invalid base_address", __FUNCTION__);
}

/* Control Signal Routing Register (CSRT) */
@@ -459,7 +460,7 @@
case 9: temp = 0x05; break;
case 11: temp = 0x06; break;
case 15: temp = 0x07; break;
- default: ERROR(__FUNCTION__ "(), invalid irq");
+ default: ERROR("%s(), invalid irq", __FUNCTION__);
}
outb(1, cfg_base);

@@ -467,7 +468,7 @@
case 0: outb(0x08+temp, cfg_base+1); break;
case 1: outb(0x10+temp, cfg_base+1); break;
case 3: outb(0x18+temp, cfg_base+1); break;
- default: ERROR(__FUNCTION__ "(), invalid dma");
+ default: ERROR("%s(), invalid dma", __FUNCTION__);
}

outb(2, cfg_base); /* Mode Control Register (MCTL) */
@@ -506,7 +507,7 @@
break;
}
info->sir_base = info->fir_base;
- IRDA_DEBUG(2, __FUNCTION__ "(), probing fir_base=0x%03x\n",
+ IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __FUNCTION__,
info->fir_base);

/* Read control signals routing register (CSRT) */
@@ -539,7 +540,7 @@
info->irq = 15;
break;
}
- IRDA_DEBUG(2, __FUNCTION__ "(), probing irq=%d\n", info->irq);
+ IRDA_DEBUG(2, "%s(), probing irq=%d\n", __FUNCTION__, info->irq);

/* Currently we only read Rx DMA but it will also be used for Tx */
switch ((reg >> 3) & 0x03) {
@@ -556,7 +557,7 @@
info->dma = 3;
break;
}
- IRDA_DEBUG(2, __FUNCTION__ "(), probing dma=%d\n", info->dma);
+ IRDA_DEBUG(2, "%s(), probing dma=%d\n", __FUNCTION__, info->dma);

/* Read mode control register (MCTL) */
outb(CFG_MCTL, cfg_base);
@@ -702,7 +703,7 @@
switch_bank(iobase, BANK3);
version = inb(iobase+MID);

- IRDA_DEBUG(2, __FUNCTION__ "() Driver %s Found chip version %02x\n",
+ IRDA_DEBUG(2, "%s() Driver %s Found chip version %02x\n", __FUNCTION__,
driver_name, version);

/* Should be 0x2? */
@@ -805,39 +806,39 @@
switch (dongle_id) {
case 0x00: /* same as */
case 0x01: /* Differential serial interface */
- IRDA_DEBUG(0, __FUNCTION__ "(), %s not defined by irda yet\n",
- dongle_types[dongle_id]);
+ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+ __FUNCTION__, dongle_types[dongle_id]);
break;
case 0x02: /* same as */
case 0x03: /* Reserved */
- IRDA_DEBUG(0, __FUNCTION__ "(), %s not defined by irda yet\n",
- dongle_types[dongle_id]);
+ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+ __FUNCTION__, dongle_types[dongle_id]);
break;
case 0x04: /* Sharp RY5HD01 */
break;
case 0x05: /* Reserved, but this is what the Thinkpad reports */
- IRDA_DEBUG(0, __FUNCTION__ "(), %s not defined by irda yet\n",
- dongle_types[dongle_id]);
+ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+ __FUNCTION__, dongle_types[dongle_id]);
break;
case 0x06: /* Single-ended serial interface */
- IRDA_DEBUG(0, __FUNCTION__ "(), %s not defined by irda yet\n",
- dongle_types[dongle_id]);
+ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+ __FUNCTION__, dongle_types[dongle_id]);
break;
case 0x07: /* Consumer-IR only */
- IRDA_DEBUG(0, __FUNCTION__ "(), %s is not for IrDA mode\n",
- dongle_types[dongle_id]);
+ IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
+ __FUNCTION__, dongle_types[dongle_id]);
break;
case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */
- IRDA_DEBUG(0, __FUNCTION__ "(), %s\n",
- dongle_types[dongle_id]);
+ IRDA_DEBUG(0, "%s(), %s\n",
+ __FUNCTION__, dongle_types[dongle_id]);
break;
case 0x09: /* IBM31T1100 or Temic TFDS6000/TFDS6500 */
outb(0x28, iobase+7); /* Set irsl[0-2] as output */
break;
case 0x0A: /* same as */
case 0x0B: /* Reserved */
- IRDA_DEBUG(0, __FUNCTION__ "(), %s not defined by irda yet\n",
- dongle_types[dongle_id]);
+ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+ __FUNCTION__, dongle_types[dongle_id]);
break;
case 0x0C: /* same as */
case 0x0D: /* HP HSDL-1100/HSDL-2100 */
@@ -851,15 +852,15 @@
outb(0x28, iobase+7); /* Set irsl[0-2] as output */
break;
case 0x0F: /* No dongle connected */
- IRDA_DEBUG(0, __FUNCTION__ "(), %s\n",
- dongle_types[dongle_id]);
+ IRDA_DEBUG(0, "%s(), %s\n",
+ __FUNCTION__, dongle_types[dongle_id]);

switch_bank(iobase, BANK0);
outb(0x62, iobase+MCR);
break;
default:
- IRDA_DEBUG(0, __FUNCTION__ "(), invalid dongle_id %#x",
- dongle_id);
+ IRDA_DEBUG(0, "%s(), invalid dongle_id %#x",
+ __FUNCTION__, dongle_id);
}

/* IRCFG1: IRSL1 and 2 are set to IrDA mode */
@@ -891,31 +892,31 @@
switch (dongle_id) {
case 0x00: /* same as */
case 0x01: /* Differential serial interface */
- IRDA_DEBUG(0, __FUNCTION__ "(), %s not defined by irda yet\n",
- dongle_types[dongle_id]);
+ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+ __FUNCTION__, dongle_types[dongle_id]);
break;
case 0x02: /* same as */
case 0x03: /* Reserved */
- IRDA_DEBUG(0, __FUNCTION__ "(), %s not defined by irda yet\n",
- dongle_types[dongle_id]);
+ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+ __FUNCTION__, dongle_types[dongle_id]);
break;
case 0x04: /* Sharp RY5HD01 */
break;
case 0x05: /* Reserved */
- IRDA_DEBUG(0, __FUNCTION__ "(), %s not defined by irda yet\n",
- dongle_types[dongle_id]);
+ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+ __FUNCTION__, dongle_types[dongle_id]);
break;
case 0x06: /* Single-ended serial interface */
- IRDA_DEBUG(0, __FUNCTION__ "(), %s not defined by irda yet\n",
- dongle_types[dongle_id]);
+ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+ __FUNCTION__, dongle_types[dongle_id]);
break;
case 0x07: /* Consumer-IR only */
- IRDA_DEBUG(0, __FUNCTION__ "(), %s is not for IrDA mode\n",
- dongle_types[dongle_id]);
+ IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
+ __FUNCTION__, dongle_types[dongle_id]);
break;
case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */
- IRDA_DEBUG(0, __FUNCTION__ "(), %s\n",
- dongle_types[dongle_id]);
+ IRDA_DEBUG(0, "%s(), %s\n",
+ __FUNCTION__, dongle_types[dongle_id]);
outb(0x00, iobase+4);
if (speed > 115200)
outb(0x01, iobase+4);
@@ -934,8 +935,8 @@
break;
case 0x0A: /* same as */
case 0x0B: /* Reserved */
- IRDA_DEBUG(0, __FUNCTION__ "(), %s not defined by irda yet\n",
- dongle_types[dongle_id]);
+ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+ __FUNCTION__, dongle_types[dongle_id]);
break;
case 0x0C: /* same as */
case 0x0D: /* HP HSDL-1100/HSDL-2100 */
@@ -943,14 +944,14 @@
case 0x0E: /* Supports SIR Mode only */
break;
case 0x0F: /* No dongle connected */
- IRDA_DEBUG(0, __FUNCTION__ "(), %s is not for IrDA mode\n",
- dongle_types[dongle_id]);
+ IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
+ __FUNCTION__, dongle_types[dongle_id]);

switch_bank(iobase, BANK0);
outb(0x62, iobase+MCR);
break;
default:
- IRDA_DEBUG(0, __FUNCTION__ "(), invalid data_rate\n");
+ IRDA_DEBUG(0, "%s(), invalid data_rate\n", __FUNCTION__);
}
/* Restore bank register */
outb(bank, iobase+BSR);
@@ -969,7 +970,7 @@
int iobase;
__u8 bank;

- IRDA_DEBUG(2, __FUNCTION__ "(), speed=%d\n", speed);
+ IRDA_DEBUG(2, "%s(), speed=%d\n", __FUNCTION__, speed);

ASSERT(self != NULL, return;);

@@ -1002,19 +1003,19 @@
outb(inb(iobase+4) | 0x04, iobase+4);

mcr = MCR_MIR;
- IRDA_DEBUG(0, __FUNCTION__ "(), handling baud of 576000\n");
+ IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __FUNCTION__);
break;
case 1152000:
mcr = MCR_MIR;
- IRDA_DEBUG(0, __FUNCTION__ "(), handling baud of 1152000\n");
+ IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __FUNCTION__);
break;
case 4000000:
mcr = MCR_FIR;
- IRDA_DEBUG(0, __FUNCTION__ "(), handling baud of 4000000\n");
+ IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __FUNCTION__);
break;
default:
mcr = MCR_FIR;
- IRDA_DEBUG(0, __FUNCTION__ "(), unknown baud rate of %d\n",
+ IRDA_DEBUG(0, "%s(), unknown baud rate of %d\n", __FUNCTION__,
speed);
break;
}
@@ -1278,15 +1279,15 @@
int actual = 0;
__u8 bank;

- IRDA_DEBUG(4, __FUNCTION__ "()\n");
+ IRDA_DEBUG(4, "%s()\n", __FUNCTION__);

/* Save current bank */
bank = inb(iobase+BSR);

switch_bank(iobase, BANK0);
if (!(inb_p(iobase+LSR) & LSR_TXEMP)) {
- IRDA_DEBUG(4, __FUNCTION__
- "(), warning, FIFO not empty yet!\n");
+ IRDA_DEBUG(4, "%s(), warning, FIFO not empty yet!\n",
+ __FUNCTION__);

/* FIFO may still be filled to the Tx interrupt threshold */
fifo_size -= 17;
@@ -1298,7 +1299,7 @@
outb(buf[actual++], iobase+TXD);
}

- IRDA_DEBUG(4, __FUNCTION__ "(), fifo_size %d ; %d sent of %d\n",
+ IRDA_DEBUG(4, "%s(), fifo_size %d ; %d sent of %d\n", __FUNCTION__,
fifo_size, actual, len);

/* Restore bank */
@@ -1320,7 +1321,7 @@
__u8 bank;
int ret = TRUE;

- IRDA_DEBUG(2, __FUNCTION__ "()\n");
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);

iobase = self->io.fir_base;

@@ -1456,7 +1457,7 @@
len = inb(iobase+RFLFL) | ((inb(iobase+RFLFH) & 0x1f) << 8);

if (st_fifo->tail >= MAX_RX_WINDOW) {
- IRDA_DEBUG(0, __FUNCTION__ "(), window is full!\n");
+ IRDA_DEBUG(0, "%s(), window is full!\n", __FUNCTION__);
continue;
}

@@ -1546,8 +1547,8 @@

skb = dev_alloc_skb(len+1);
if (skb == NULL) {
- WARNING(__FUNCTION__ "(), memory squeeze, "
- "dropping frame.\n");
+ WARNING("%s(), memory squeeze, "
+ "dropping frame.\n", __FUNCTION__);
self->stats.rx_dropped++;

/* Restore bank register */
@@ -1643,7 +1644,7 @@
if (eir & EIR_TXEMP_EV) {
/* Check if we need to change the speed? */
if (self->new_speed) {
- IRDA_DEBUG(2, __FUNCTION__ "(), Changing speed!\n");
+ IRDA_DEBUG(2, "%s(), Changing speed!\n", __FUNCTION__);
nsc_ircc_change_speed(self, self->new_speed);
self->new_speed = 0;

@@ -1822,7 +1823,7 @@
*/
static int nsc_ircc_net_init(struct net_device *dev)
{
- IRDA_DEBUG(4, __FUNCTION__ "()\n");
+ IRDA_DEBUG(4, "%s()\n", __FUNCTION__);

/* Setup to be a normal IrDA network device driver */
irda_device_setup(dev);
@@ -1845,7 +1846,7 @@
char hwname[32];
__u8 bank;

- IRDA_DEBUG(4, __FUNCTION__ "()\n");
+ IRDA_DEBUG(4, "%s()\n", __FUNCTION__);

ASSERT(dev != NULL, return -1;);
self = (struct nsc_ircc_cb *) dev->priv;
@@ -1909,7 +1910,7 @@
int iobase;
__u8 bank;

- IRDA_DEBUG(4, __FUNCTION__ "()\n");
+ IRDA_DEBUG(4, "%s()\n", __FUNCTION__);

ASSERT(dev != NULL, return -1;);

@@ -1965,7 +1966,7 @@

ASSERT(self != NULL, return -1;);

- IRDA_DEBUG(2, __FUNCTION__ "(), %s, (cmd=0x%X)\n", dev->name, cmd);
+ IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);

/* Disable interrupts & save flags */
save_flags(flags);
\
 
 \ /
  Last update: 2005-03-22 13:28    [W:0.031 / U:0.564 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site