Messages in this thread | | | Date | Thu, 18 Jul 2002 21:57:18 +0800 | From | zhengchuanbo <> | Subject | Re: Re: problem of linux-2.4.19 |
| |
i replaced 'read-only' in lilo with 'read-write'. and it worked. the system worked well. but why it worked int pre1 and pre2,but not in rc1 and rc2, is there some modification to this in the kernel? thanks.
>At 15:02 18-7-02, you wrote: > >> i met some problem with linux2.4.19. i devided my disk to three >> partitions: hda1,hda2 and hda3. hda3 is the swap. both hda1 and hda2 are >> ext3 file system. i boot the system with a initrd image which is saved on hda1. >> when i use linux-2.4.19-pre1 and pre2, the system worked well. but when >> i test linux-2.4.19-pre9,pre10,rc1 and rc2, the same problem happened to >> all these verions. the system boot up, but the filesystem is readonly.the >> following is what on the screen(not exactly): >>.. >>mount root as readonly >>INIT version is 2.78 >>swap on(swap priority -1) >>.. > >this looks like normal behaviour (output from dmesg): ><snip> >VFS: Mounted root (reiserfs filesystem) readonly. ><snip> > >> is there some bugs in linux-2.4.19 with the filesystem? or with the >> initrd boot? or i made some mistakes? > >the last 2 lines of your output are NOT kernel messages, when you see 'INIT >version ...' it means that the kernel has booted and userspace bootup begins. > >your bootscripts should first check the root filesystem (and then it must >be mounted readonly) and then remount it read/write > >another possiblity is to change your lilo.conf and remove the line which >says 'read-only' or replace it with 'read-write' > >if you do not have lilo, then check the man-page of your bootloader on how >to force the kernel to mount root rw > > Rudmer
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |