Messages in this thread | | | Date | Tue, 28 May 2002 21:18:57 -0400 | From | sean darcy <> | Subject | Re: Sony DSC-P71 Camera |
| |
You don't say which kernel you're using. I have a p71 which I can't get to work with 2.5.18 - see the mass storage thread. OTOH, a stock rh 2.4.18 kernel works just fine.
What does usbview show? What are the usb and scsi snips from .config. What hapens when you try to mount sd* ?
Colin Slater wrote: > Hello, > I just got a Sony DSC-P71 digital camera (wonderful), but it doesn't > seem to be working in linux. I beleive it uses the usb mass storage > driver, it seems to use an equivilent driver in windows. I have scsi, > usb, usb mass storage modules all loaded. > dmesg after I load the usb-storage module, and then plug the camera in: > > Initializing USB Mass Storage driver... > usb.c: registered new driver usb-storage > USB Mass Storage support registered. > hub.c: USB new device connect on bus1/1, assigned device number 3 > scsi0 : SCSI emulation for USB Mass Storage devices > > I am useing devfs, and /dev/scsi is empty. > > cat /proc/bus/usb/devices: > <snip> > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 > D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=054c ProdID=0010 Rev= 4.10 > S: Manufacturer=Sony > S: Product=Sony DSC > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA > I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=ff Prot=01 Driver=(none) > E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms > E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=255ms > <snip> > > All this happens regardless of NVdriver being loaded or not. > > If someone with one of these cameras or the nearly identical DSC-P31 > could help me, it would be appreciated > > Colin > >
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |