Messages in this thread | | | Subject | Re: PROBLEM: `modprobe agpgart` locks machine badly | From | Alex Brotman <> | Date | 23 May 2002 19:32:37 -0400 |
| |
well lets assume i wanted to use 'e0000000'(based on win32) as my value for region 0 on PCI device 00:00.0 .. How would i use setpci to manipulate those settings? The man page wasn't much help. Thanks.
On Wed, 2002-05-15 at 03:35, Diego SANTA CRUZ wrote: > On Wed, 2002-05-15 at 13:50, Denis Vlasenko wrote: > > On 14 May 2002 06:11, Diego SANTA CRUZ wrote: > > > I did a bit of debugging some time ago with the datasheets from intel. > > > If i remember well, the problem was that the base of the aperture is not > > > initialized by the BIOS (i.e. the APBASE register of the AGP bridge). > > > > > > This is visible in the lspci listing above, in that the Region 0 memory > > > is "<unassigned>". On the machines that I have seen with agpgart > > > working, the address of Region 0 is the address that appears in the > > > APBASE register. > > > > Can it be set manually with setpci? > > Not that I know. Besides, what would be the correct value? However, my > knowledge of hardware programming in nearly zero so... > > Best, > > Diego > > > -- > > vda > -- > ------------------------------------------------------- > Diego Santa Cruz > PhD. student > Publications available at http://ltswww.epfl.ch/~dsanta > Signal Processing Institute (ITS) -- formerly LTS > Swiss Federal Institute of Technology (EPFL) > EPFL - STI - ITS, CH-1015 Lausanne, Switzerland > E-mail: Diego.SantaCruz@epfl.ch > Phone: +41 - 21 - 693 26 57 > Fax: +41 - 21 - 693 76 00 > ------------------------------------------------------- >
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |