lkml.org 
[lkml]   [2002]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRe: PROBLEM: `modprobe agpgart` locks machine badly
    Date
    On 14 May 2002 06:11, Diego SANTA CRUZ wrote:
    > I did a bit of debugging some time ago with the datasheets from intel.
    > If i remember well, the problem was that the base of the aperture is not
    > initialized by the BIOS (i.e. the APBASE register of the AGP bridge).
    >
    > This is visible in the lspci listing above, in that the Region 0 memory
    > is "<unassigned>". On the machines that I have seen with agpgart
    > working, the address of Region 0 is the address that appears in the
    > APBASE register.

    Can it be set manually with setpci?
    --
    vda
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 13:26    [W:0.025 / U:30.280 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site