[lkml]   [2002]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    SubjectRe: [BUG] 2.5.10 - kernel hangs after detecting CD/DVD ROM (was: Re: IDE problem: 2.5.10 compiles but hangs during boot)
    Stephan Maciej <> writes:
    > later
    > VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
    > ide0: BM-DMA at 0x1c40-0x1c47, BIOS settings: hda:DMA, hdb:pio
    > ide1: BM-DMA at 0x1c48-0x1c4f, BIOS settings: hdc:DMA, hdd:pio
    > hda: HITACHI_DK23CA-20, ATA DISK drive
    > hdc: QSI DVD-ROM SDR-081, ATAPI CD/DVD-ROM drive
    > That's the last line I see from a 2.5.10 kernel booting up. 2.5.9 does go
    > farther:

    I have a similar problem on the VirtuHammer simulator. On trying to access
    the virtual disk using PIO mode the simular breaks with an error
    in a rep ; outsb loop complaining about "writing data while in data in phase".
    I guess your problem could be the same, as the DVD is likely accessed
    using PIO. 2.5.10 fails, 2.5.9 works.

    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to
    More majordomo info at
    Please read the FAQ at

     \ /
      Last update: 2005-03-22 13:25    [W:0.023 / U:48.416 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site