Messages in this thread | | | Date | Fri, 26 Apr 2002 23:37:45 +0200 | From | Martin Dalecki <> | Subject | Re: [BUG] 2.5.10 - kernel hangs after detecting CD/DVD ROM (was: Re: IDE problem: 2.5.10 compiles but hangs during boot) |
| |
Uz.ytkownik Andi Kleen napisa?: > Stephan Maciej <stephan@maciej.muc.de> writes: > >>later >>VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1 >> ide0: BM-DMA at 0x1c40-0x1c47, BIOS settings: hda:DMA, hdb:pio >> ide1: BM-DMA at 0x1c48-0x1c4f, BIOS settings: hdc:DMA, hdd:pio >>hda: HITACHI_DK23CA-20, ATA DISK drive >>hdc: QSI DVD-ROM SDR-081, ATAPI CD/DVD-ROM drive >> >>That's the last line I see from a 2.5.10 kernel booting up. 2.5.9 does go >>farther: > > > I have a similar problem on the VirtuHammer simulator. On trying to access > the virtual disk using PIO mode the simular breaks with an error > in a rep ; outsb loop complaining about "writing data while in data in phase". > I guess your problem could be the same, as the DVD is likely accessed > using PIO. 2.5.10 fails, 2.5.9 works.
please apply IDE 41. There are known errors there.
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |