lkml.org 
[lkml]   [2001]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject2.4.2 pcnet32 routing trouble
Hi,

there is a strange "routing" bug in the pcnet32 driver.
I have a 4port Ethernet card and 2 onboard connectors on an IBM B80
(pSeries 640). The machine is usualy connected via the onboard eth0
(10.10.3.21).

I can bring up the interfaces on the 4port card, in this case eth5
(10.10.11.145).
ping and telnet etc. works fine, but the counters for TX and RX are not
increased.
I tried eth1 (10.10.0.132) and plugged the cable from eth5 to eth1.
Same behaviour, only a few RX packets, the counter is appearently dead
after a while.
The interresting part is: I can still telnet to 10.10.11.145 even if the
port is not connected. That works also with eth1.

It seems that the whole traffic goes through eth0. Is this a bug in the
pcnet32 driver or the ppc implementation?



Gruss Olaf

--
$ man clone

BUGS
Main feature not yet implemented...
[unhandled content-type:application/x-gunzip][unhandled content-type:application/x-gunzip][unhandled content-type:application/x-gunzip][unhandled content-type:application/x-gunzip]
\
 
 \ /
  Last update: 2005-03-22 13:18    [W:0.052 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site