lkml.org 
[lkml]   [2001]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] documentation mm.h, mmzone.h and swap.h
Hi Linus, Alan,

The patch below adds documentation to mm.h, mmzone.h and swap.h.
I know it's not complete, but I'm stopping with the documentation
for now, I'll continue at a later date ;)

Please apply this for the next (pre)kernel.

thanks,

Rik
--
Virtual memory is like a game you can't win;
However, without VM there's truly nothing to lose...

http://www.surriel.com/
http://www.conectiva.com/ http://distro.conectiva.com/



--- linux-2.4.2-doc/include/linux/mm.h.orig Wed Mar 7 15:36:32 2001
+++ linux-2.4.2-doc/include/linux/mm.h Fri Mar 9 19:48:15 2001
@@ -39,32 +39,38 @@
* library, the executable area etc).
*/
struct vm_area_struct {
- struct mm_struct * vm_mm; /* VM area parameters */
- unsigned long vm_start;
- unsigned long vm_end;
+ struct mm_struct * vm_mm; /* The address space we belong to. */
+ unsigned long vm_start; /* Our start address within vm_mm. */
+ unsigned long vm_end; /* The first byte after our end address
+ within vm_mm. */

/* linked list of VM areas per task, sorted by address */
struct vm_area_struct *vm_next;

- pgprot_t vm_page_prot;
- unsigned long vm_flags;
+ pgprot_t vm_page_prot; /* Access permissions of this VMA. */
+ unsigned long vm_flags; /* Flags, listed below. */

/* AVL tree of VM areas per task, sorted by address */
short vm_avl_height;
struct vm_area_struct * vm_avl_left;
struct vm_area_struct * vm_avl_right;

- /* For areas with an address space and backing store,
+ /*
+ * For areas with an address space and backing store,
* one of the address_space->i_mmap{,shared} lists,
* for shm areas, the list of attaches, otherwise unused.
*/
struct vm_area_struct *vm_next_share;
struct vm_area_struct **vm_pprev_share;

+ /* Function pointers to deal with this struct. */
struct vm_operations_struct * vm_ops;
- unsigned long vm_pgoff; /* offset in PAGE_SIZE units, *not* PAGE_CACHE_SIZE */
- struct file * vm_file;
- unsigned long vm_raend;
+
+ /* Information about our backing store: */
+ unsigned long vm_pgoff; /* Offset (within vm_file) in PAGE_SIZE
+ units, *not* PAGE_CACHE_SIZE */
+ struct file * vm_file; /* File we map to (can be NULL). */
+ unsigned long vm_raend; /* XXX: put full readahead info here. */
void * vm_private_data; /* was vm_pte (shared mem) */
};

@@ -90,6 +96,7 @@
#define VM_LOCKED 0x00002000
#define VM_IO 0x00004000 /* Memory mapped I/O or similar */

+ /* Used by sys_madvise() */
#define VM_SEQ_READ 0x00008000 /* App will access data sequentially */
#define VM_RAND_READ 0x00010000 /* App will not benefit from clustered reads */

@@ -124,37 +131,145 @@
};

/*
+ * Each physical page in the system has a struct page associated with
+ * it to keep track of whatever it is we are using the page for at the
+ * moment. Note that we have no way to track which tasks are using
+ * a page.
+ *
* Try to keep the most commonly accessed fields in single cache lines
* here (16 bytes or greater). This ordering should be particularly
* beneficial on 32-bit processors.
*
* The first line is data used in page cache lookup, the second line
* is used for linear searches (eg. clock algorithm scans).
+ *
+ * TODO: make this structure smaller, it could be as small as 32 bytes.
*/
typedef struct page {
- struct list_head list;
- struct address_space *mapping;
- unsigned long index;
- struct page *next_hash;
- atomic_t count;
- unsigned long flags; /* atomic flags, some possibly updated asynchronously */
- struct list_head lru;
- unsigned long age;
- wait_queue_head_t wait;
- struct page **pprev_hash;
- struct buffer_head * buffers;
- void *virtual; /* non-NULL if kmapped */
- struct zone_struct *zone;
+ struct list_head list; /* ->mapping has some page lists. */
+ struct address_space *mapping; /* The inode (or ...) we belong to. */
+ unsigned long index; /* Our offset within mapping, in
+ units of PAGE_CACHE_SIZE. */
+ struct page *next_hash; /* Next page sharing our hash bucket in
+ the page cache hash table. */
+ atomic_t count; /* Usage count, see below. */
+ unsigned long flags; /* atomic flags, some possibly
+ updated asynchronously */
+ struct list_head lru; /* Pageout list, eg active_list;
+ protected by pagemap_lru_lock !! */
+ unsigned long age; /* Page aging counter. */
+ wait_queue_head_t wait; /* Page locked? Stand in line... */
+ struct page **pprev_hash; /* Complement to *next_hash. */
+ struct buffer_head * buffers; /* Buffer maps us to a disk block. */
+ void *virtual; /* Kernel virtual address (NULL if
+ not kmapped, ie highmem) */
+ struct zone_struct *zone; /* Memory zone we are in. */
} mem_map_t;

+/*
+ * Methods to modify the page usage count.
+ *
+ * What counts for a page usage:
+ * - cache mapping (page->mapping)
+ * - disk mapping (page->buffers)
+ * - page mapped in a task's page tables, each mapping
+ * is counted separately
+ *
+ * Also, many kernel routines increase the page count before a critical
+ * routine so they can be sure the page doesn't go away from under them.
+ */
#define get_page(p) atomic_inc(&(p)->count)
#define put_page(p) __free_page(p)
#define put_page_testzero(p) atomic_dec_and_test(&(p)->count)
#define page_count(p) atomic_read(&(p)->count)
#define set_page_count(p,v) atomic_set(&(p)->count, v)

-/* Page flag bit values */
-#define PG_locked 0
+/*
+ * Various page->flags bits:
+ *
+ * PG_reserved is set for special pages, which can never be swapped
+ * out. Some of them might not even exist (eg empty_bad_page)...
+ *
+ * Multiple processes may "see" the same page. E.g. for untouched
+ * mappings of /dev/null, all processes see the same page full of
+ * zeroes, and text pages of executables and shared libraries have
+ * only one copy in memory, at most, normally.
+ *
+ * For the non-reserved pages, page->count denotes a reference count.
+ * page->count == 0 means the page is free.
+ * page->count == 1 means the page is used for exactly one purpose
+ * (e.g. a private data page of one process).
+ *
+ * A page may be used for kmalloc() or anyone else who does a
+ * __get_free_page(). In this case the page->count is at least 1, and
+ * all other fields are unused but should be 0 or NULL. The
+ * management of this page is the responsibility of the one who uses
+ * it.
+ *
+ * The other pages (we may call them "process pages") are completely
+ * managed by the Linux memory manager: I/O, buffers, swapping etc.
+ * The following discussion applies only to them.
+ *
+ * A page may belong to an inode's memory mapping. In this case,
+ * page->mapping is the pointer to the inode, and page->index is the
+ * file offset of the page, in units of PAGE_CACHE_SIZE.
+ *
+ * A page may have buffers allocated to it. In this case,
+ * page->buffers is a circular list of these buffer heads. Else,
+ * page->buffers == NULL.
+ *
+ * For pages belonging to inodes, the page->count is the number of
+ * attaches, plus 1 if buffers are allocated to the page, plus one
+ * for the page cache itself.
+ *
+ * All pages belonging to an inode are in these doubly linked lists:
+ * mapping->clean_pages, mapping->dirty_pages and mapping->locked_pages;
+ * using the page->list list_head. These fields are also used for
+ * freelist managemet (when page->count==0).
+ *
+ * There is also a hash table mapping (mapping,index) to the page
+ * in memory if present. The lists for this hash table use the fields
+ * page->next_hash and page->pprev_hash.
+ *
+ * All process pages can do I/O:
+ * - inode pages may need to be read from disk,
+ * - inode pages which have been modified and are MAP_SHARED may need
+ * to be written to disk,
+ * - private pages which have been modified may need to be swapped out
+ * to swap space and (later) to be read back into memory.
+ * During disk I/O, PG_locked is used. This bit is set before I/O
+ * and reset when I/O completes. page->wait is a wait queue of all
+ * tasks waiting for the I/O on this page to complete.
+ * PG_uptodate tells whether the page's contents is valid.
+ * When a read completes, the page becomes uptodate, unless a disk I/O
+ * error happened.
+ *
+ * For choosing which pages to swap out, inode pages carry a
+ * PG_referenced bit, which is set any time the system accesses
+ * that page through the (mapping,index) hash table. This referenced
+ * bit, together with the referenced bit in the page tables, is used
+ * to manipulate page->age and move the page across the active,
+ * inactive_dirty and inactive_clean lists.
+ *
+ * Note that the referenced bit, the page->lru list_head and the
+ * active, inactive_dirty and inactive_clean lists are protected by
+ * the pagemap_lru_lock, and *NOT* by the usual PG_locked bit!
+ *
+ * PG_skip is used on sparc/sparc64 architectures to "skip" certain
+ * parts of the address space.
+ *
+ * PG_error is set to indicate that an I/O error occurred on this page.
+ *
+ * PG_arch_1 is an architecture specific page state bit. The generic
+ * code guarantees that this bit is cleared for a page when it first
+ * is entered into the page cache.
+ *
+ * PG_highmem pages are not permanently mapped into the kernel virtual
+ * address space, they need to be kmapped separately for doing IO on
+ * the pages. The struct page (these bits with information) are always
+ * mapped into kernel address space...
+ */
+#define PG_locked 0 /* Page is locked. Don't touch. */
#define PG_error 1
#define PG_referenced 2
#define PG_uptodate 3
@@ -254,81 +369,7 @@
#define NOPAGE_SIGBUS (NULL)
#define NOPAGE_OOM ((struct page *) (-1))

-
-/*
- * Various page->flags bits:
- *
- * PG_reserved is set for a page which must never be accessed (which
- * may not even be present).
- *
- * PG_DMA has been removed, page->zone now tells exactly wether the
- * page is suited to do DMAing into.
- *
- * Multiple processes may "see" the same page. E.g. for untouched
- * mappings of /dev/null, all processes see the same page full of
- * zeroes, and text pages of executables and shared libraries have
- * only one copy in memory, at most, normally.
- *
- * For the non-reserved pages, page->count denotes a reference count.
- * page->count == 0 means the page is free.
- * page->count == 1 means the page is used for exactly one purpose
- * (e.g. a private data page of one process).
- *
- * A page may be used for kmalloc() or anyone else who does a
- * __get_free_page(). In this case the page->count is at least 1, and
- * all other fields are unused but should be 0 or NULL. The
- * management of this page is the responsibility of the one who uses
- * it.
- *
- * The other pages (we may call them "process pages") are completely
- * managed by the Linux memory manager: I/O, buffers, swapping etc.
- * The following discussion applies only to them.
- *
- * A page may belong to an inode's memory mapping. In this case,
- * page->inode is the pointer to the inode, and page->offset is the
- * file offset of the page (not necessarily a multiple of PAGE_SIZE).
- *
- * A page may have buffers allocated to it. In this case,
- * page->buffers is a circular list of these buffer heads. Else,
- * page->buffers == NULL.
- *
- * For pages belonging to inodes, the page->count is the number of
- * attaches, plus 1 if buffers are allocated to the page.
- *
- * All pages belonging to an inode make up a doubly linked list
- * inode->i_pages, using the fields page->next and page->prev. (These
- * fields are also used for freelist management when page->count==0.)
- * There is also a hash table mapping (inode,offset) to the page
- * in memory if present. The lists for this hash table use the fields
- * page->next_hash and page->pprev_hash.
- *
- * All process pages can do I/O:
- * - inode pages may need to be read from disk,
- * - inode pages which have been modified and are MAP_SHARED may need
- * to be written to disk,
- * - private pages which have been modified may need to be swapped out
- * to swap space and (later) to be read back into memory.
- * During disk I/O, PG_locked is used. This bit is set before I/O
- * and reset when I/O completes. page->wait is a wait queue of all
- * tasks waiting for the I/O on this page to complete.
- * PG_uptodate tells whether the page's contents is valid.
- * When a read completes, the page becomes uptodate, unless a disk I/O
- * error happened.
- *
- * For choosing which pages to swap out, inode pages carry a
- * PG_referenced bit, which is set any time the system accesses
- * that page through the (inode,offset) hash table.
- *
- * PG_skip is used on sparc/sparc64 architectures to "skip" certain
- * parts of the address space.
- *
- * PG_error is set to indicate that an I/O error occurred on this page.
- *
- * PG_arch_1 is an architecture specific page state bit. The generic
- * code guarentees that this bit is cleared for a page when it first
- * is entered into the page cache.
- */
-
+/* The array of struct pages */
extern mem_map_t * mem_map;

/*
@@ -522,11 +563,6 @@
}

extern struct vm_area_struct *find_extend_vma(struct mm_struct *mm, unsigned long addr);
-
-#define buffer_under_min() (atomic_read(&buffermem_pages) * 100 < \
- buffer_mem.min_percent * num_physpages)
-#define pgcache_under_min() (atomic_read(&page_cache_size) * 100 < \
- page_cache.min_percent * num_physpages)

#endif /* __KERNEL__ */

--- linux-2.4.2-doc/include/linux/mmzone.h.orig Wed Mar 7 15:36:32 2001
+++ linux-2.4.2-doc/include/linux/mmzone.h Tue Mar 13 02:43:11 2001
@@ -21,6 +21,14 @@

struct pglist_data;

+/*
+ * On machines where it is needed (eg PCs) we divide physical memory
+ * into multiple physical zones. On a PC we have 3 zones:
+ *
+ * ZONE_DMA < 16 MB ISA DMA capable memory
+ * ZONE_NORMAL 16-896 MB direct mapped by the kernel
+ * ZONE_HIGHMEM > 896 MB only page cache and user processes
+ */
typedef struct zone_struct {
/*
* Commonly accessed fields:
@@ -75,6 +83,17 @@

#define NR_GFPINDEX 0x100

+/*
+ * The pg_data_t structure is used in machines with CONFIG_DISCONTIGMEM
+ * (mostly NUMA machines?) to denote a higher-level memory zone than the
+ * zone_struct denotes.
+ *
+ * On NUMA machines, each NUMA node would have a pg_data_t to describe
+ * it's memory layout.
+ *
+ * XXX: we need to move the global memory statistics (active_list, ...)
+ * into the pg_data_t to properly support NUMA.
+ */
struct bootmem_data;
typedef struct pglist_data {
zone_t node_zones[MAX_NR_ZONES];
--- linux-2.4.2-doc/include/linux/swap.h.orig Wed Mar 7 15:36:37 2001
+++ linux-2.4.2-doc/include/linux/swap.h Thu Mar 8 09:54:02 2001
@@ -10,11 +10,23 @@

#define MAX_SWAPFILES 8

+/*
+ * Magic header for a swap area. The first part of the union is
+ * what the swap magic looks like for the old (limited to 128MB)
+ * swap area format, the second part of the union adds - in the
+ * old reserved area - some extra information. Note that the first
+ * kilobyte is reserved for boot loader or disk label stuff...
+ *
+ * Having the magic at the end of the PAGE_SIZE makes detecting swap
+ * areas somewhat tricky on machines that support multiple page sizes.
+ * For 2.5 we'll probably want to move the magic to just beyond the
+ * bootbits...
+ */
union swap_header {
struct
{
char reserved[PAGE_SIZE - 10];
- char magic[10];
+ char magic[10]; /* SWAP-SPACE or SWAPSPACE2 */
} magic;
struct
{
@@ -46,6 +58,9 @@
#define SWAP_MAP_MAX 0x7fff
#define SWAP_MAP_BAD 0x8000

+/*
+ * The in-memory structure used to track swap areas.
+ */
struct swap_info_struct {
unsigned int flags;
kdev_t swap_device;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:29    [W:0.137 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site