[lkml]   [2001]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    SubjectOops report for 2.2.19(ext3)
    Hi there,

    I run linux 2.2.19ext3 on an Athlon 700 (and ASUS K7M motherboard) with
    384MB. The hard drives are all IDE, but the CD-RW drive (at hdd) is
    interfaced through the ide-scsi driver. Fairly normal hardware setup

    For at least a few months, if not most of the past year, my system
    hasn't had an uptime longer than 14 days or so. Every so often,
    approximately every 10-12 days, the system inexplicably freezes up.
    At that point, there are only two ways I can interact with the system
    -- I can open a connection to this system via telnet from another networked
    computer, but the system won't respond in any way except for opening
    the connection. Second, I can press Alt-SysRq-B to reboot.

    A friend has been experiencing similar behavior with his 2.2.19 box
    (which has the same model of CPU and motherboard). However, his
    production server running 2.2.19 with slightly different hardware has
    an uptime of 220 days. I thought I'd finally send in an Oops report
    since work towards 2.2.20 appears to have been abandoned. I have other
    Oops reports from earlier this year that I could send in. Perhaps of note,
    I was running grip when the system crashed -- it was reading from
    /dev/hdc and writing to /dec/hda.

    [ksymoops output]

    ksymoops 2.3.5 on i686 2.2.19ext3. Options used
    -v /usr/src/linux/vmlinux (default)
    -k /proc/ksyms (default)
    -l /proc/modules (default)
    -o /lib/modules/2.2.19ext3/ (default)
    -m /usr/src/linux/ (default)

    Warning: You did not tell me where to find symbol information. I will
    assume that the log matches the kernel and modules that are running
    right now and I'll use the default options above for symbol resolution.
    If the current kernel and/or modules do not match the log, you can get
    more accurate output by telling me the kernel version and where to find
    map, modules, ksyms etc. ksymoops -h explains the options.

    Warning (compare_ksyms_lsmod): module adlib_card is in lsmod but not in ksyms, probably no symbols exported
    Warning (compare_ksyms_lsmod): module awe_wave is in lsmod but not in ksyms, probably no symbols exported
    Oops: 0002
    CPU: 0
    EIP: 0010:[kmem_cache_alloc+51/292]
    EFLAGS: 00013246
    eax: 0000003d ebx: c7ed577c ecx: ffffffff edx: 0000003c
    esi: d7fef740 edi: c7ed5fc0 ebp: c7ed5700 esp: d7fd3ecc
    ds: 0018 es: 0018 ss: 0018
    Process kswapd (pid: 4, process nr: 4, stackpage=d7fd3000)
    Stack: c7ed5700 c03558c0 c29994c0 c0559b58 c0109ff8 00003246 d7fef740 d0f23000
    ffffffff c01277ea d7fef740 c7ed5700 00000018 00003202 c7ed5700 cdbccb40
    d6f1f840 00003206 c7ed5700 c7ed5680 cad82240 c0128215 c7ed5700 d7fef740
    Call Trace: [IRQ0x01_interrupt+8/16] [create_buffers+262/412] [sync_old_buffers+189/444] [sync_old_buffers+180/444] [sync_old_buffers+237/444] [exit_mmap+286/288] [schedule+374/636] [kswapd+57/160] [head_vals.1010+6502/18040] [head_vals.1010+6502/18040] [rw_swap_page_base+103/1032] [rw_swap_page_base+110/1032] [rw_swap_page_base+86/1032] [exit_thread+3/4] [flush_thread+8/68]
    Code: c7 05 00 00 00 00 00 00 00 00 eb 13 90 83 c4 fc 56 57 68 0c
    Using defaults from ksymoops -t elf32-i386 -a i386

    Code; 00000000 Before first symbol
    00000000 <_EIP-0x1>:
    Code; 00000000 Before first symbol
    0: c7 05 00 00 00 00 00 movl $0x0,0x0
    Code; 00000007 Before first symbol
    7: 00 00 00
    Code; 00000001 Before first symbol
    00000001 <_EIP>:
    Code; 00000001 Before first symbol
    1: 05 00 00 00 00 add $0x0,%eax
    Code; 00000006 Before first symbol
    6: 00 00 add %al,(%eax)
    Code; 00000008 Before first symbol
    8: 00 00 add %al,(%eax)
    Code; 0000000a Before first symbol
    a: eb 13 jmp 1f <_EIP+0x1e> 0000001e Before first symbol
    Code; 0000000c Before first symbol
    c: 90 nop
    Code; 0000000d Before first symbol
    d: 83 c4 fc add $0xfffffffc,%esp
    Code; 00000010 Before first symbol
    10: 56 push %esi
    Code; 00000011 Before first symbol
    11: 57 push %edi
    Code; 00000012 Before first symbol
    12: 68 0c 00 00 00 push $0xc

    3 warnings issued. Results may not be reliable.
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to
    More majordomo info at
    Please read the FAQ at

     \ /
      Last update: 2005-03-22 13:13    [W:0.025 / U:32.400 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site