lkml.org 
[lkml]   [2000]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: ncr53c400 SCSI card (HP scanner)

Alan are there escape error messages in the host.h that address
non-storage SCSI calls? I have heard of this in the past but never gave
it a second thought. I do not see anything that address the issue of
non-storage commands, but then again I am not claiming to know scsi
either.

Cheers,

On Tue, 8 Aug 2000, Alan Cox wrote:

> > insmod g_NCR5380 ncr_addr=0x280 ncr_irq=255 ncr_53c400=1
> > gives the SCSI bus busy messages, and then hangs the machine.
> >
> > insmod g_NCR5380 ncr_addr=0x280 ncr_irq=255 ncr53c400a=1
> > gives Device of resource busy
> >
> > According to Window the thing is at 0x280, irq 9.
> > Any hints on how to debug this beast ?
>
> Try pnpdump - it might be you have the extra expensive (like 2cents/chip)
> ISA PnP version
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.rutgers.edu
> Please read the FAQ at http://www.tux.org/lkml/
>

Andre Hedrick
The Linux ATA/IDE guy


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:58    [W:0.125 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site