Messages in this thread | | | Date | Tue, 8 Aug 2000 10:52:26 +0200 (CEST) | From | Igmar Palsenberg <> | Subject | Re: ncr53c400 SCSI card (HP scanner) |
| |
> > You almost certainly gave it the wrong parameters/card type. Also this driver > > does not currently work SMP. > > > > For most HP scanner cheap cards > > > > inmsod g_NCR5380 ncr_addr=0x348 ncr_irq=255 ncr_53c400a=1 > > > > (from memory) > > > > and build the driver for port based I/O
insmod g_NCR5380 ncr_addr=0x280 ncr_irq=255 ncr_53c400=1 gives the SCSI bus busy messages, and then hangs the machine.
insmod g_NCR5380 ncr_addr=0x280 ncr_irq=255 ncr53c400a=1 gives Device of resource busy
According to Window the thing is at 0x280, irq 9.
Any hints on how to debug this beast ?
Regards,
Igmar
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |