lkml.org 
[lkml]   [2000]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjecttulip_cb broken in 2.3.51
I am having a strange issue with the tulip_cb driver under 2.3.51. I
suspect that it is a problem with the tulip_cb driver 'cause my ray_cs
driver/card combo function as they should.

The problem is that the stab file is wrong. Here is the
/var/state/pcmcia/stab file from 2.3.51:

Socket 0: empty
Socket 1: UMAX Technologies UMAX250 Fast Ethernet
1 network tulip_cb 0 tulip_cb

From 2.2.14 I get:

Socket 0: empty
Socket 1: UMAX Technologies UMAX250 Fast Ethernet
1 network tulip_cb 0 eth0

This causes cardmgr to try and run "./network start tulip_cb" not
"./network start eth0" as it should.

Erik.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:57    [W:0.029 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site