Messages in this thread | | | Date | Sat, 11 Sep 1999 11:09:37 -0400 (EDT) | From | "Chris D. Faulhaber" <> | Subject | Re: Adaptec 1542 and kernel 2.2.11&12 not working? |
| |
On Sat, 11 Sep 1999 tommiy@ozemail.com.au wrote:
> I have a strnage problem and have spent a number of hours investigating > but haven't found a solution so I thought I'd try the list. > > I have an old aha1542 card thats driving a sony dat drive, with all the > scsi options set for module and under kernel 2.2.9 everything works > fine as below:- > > Configuring Adaptec (SCSI-ID 7) at IO:334, IRQ 11,DMA priority 5 > Sep 11 17:21:14 bored kernel: scsi0 : Adaptec 1542 > Sep 11 17:21:14 bored kernel: scsi : 1 host. > Sep 11 17:21:14 bored kernel: Vendor: SONY Model: SDT-5200 > Rev:3.02 > Sep 11 17:21:14 bored kernel: Type: Sequential-Access > ANSI > SCSI revision: 02 > > However, if I use kernel 2.2.11 or 2.2.12 then it will not find the > scsi card at boot time and I cannot convince it to find it at all using > modprobe or insmod. Under both of these kernels if i try to use > modprobe I get:- > > /sbin/modprobe aha1542.o > /lib/modules/2.2.12udma/scsi/aha1542.o: init_module: Device or resource > busy >
/sbin/modprobe aha1542 aha1542=0x334 doesn't work?
----- Chris D. Faulhaber <jedgar@fxp.org> | All the true gurus I've met never System/Network Administrator, | claimed they were one and always Reality Check Information, Inc. | pointed to someone better.
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |