lkml.org 
[lkml]   [1999]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectUse of setserial/setrocket to set SPD_* flags is deprecated
Hi,

I'm sure this must be in some FAQ somewhere...

I've been having problems for a while now with setserial.

My PPP script looks something like this:

/bin/setserial /dev/modem spd_vhi
exec /usr/sbin/pppd /dev/modem 38400 \
$LOCAL_IP:$REMOTE_IP \
connect $DIALER_SCRIPT

And this generates the following kernel message:

Aug 22 10:24:48 skinner kernel: Use of setserial/setrocket to set
SPD_* flags is deprecated
Aug 22 10:24:49 skinner pppd[2904]: pppd 2.3.5 started by root, uid 0
Aug 22 10:24:49 skinner kernel: Use of setserial/setrocket to set
SPD_* flags is deprecated
Aug 22 10:25:16 skinner pppd[2904]: Serial connection established.
Aug 22 10:25:17 skinner pppd[2904]: Using interface ppp0
Aug 22 10:25:17 skinner pppd[2904]: Connect: ppp0 <--> /dev/modem

Anyone any ideas?

(This has been happening for a while and I have been searching the web
but the only thing I found was someone else who had a similar problem)

If this is deprecated then what is the current way of setting the serial
port to 115kb?


--
Simon [ huggie@earth.li ] *\ "Screw down my diodes and call me \**
[ http://ds.dial.pipex.com/huggie/ ] **\ Frank." - Kryten \*
**************** [ Huggietag 0.8.6 ] ***\ \

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:53    [W:0.315 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site