lkml.org 
[lkml]   [1999]   [Jun]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Massive e2fs corruption with 2.2.9/10?

Ok I got home and here are more details:

System: K6-233 , memory bus clocked at 66mhz.
Sym-810a controller, ide disk.
Problem: trying to read long files from cd-rw (Yamaha 4416s) fails:

ncr53c810a-0-<3,0>: extraneous data discarded.
ncr53c810a-0-<3,0>: COMMAND FAILED (89 0) @c0004020.
scsi0 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 0 channel 0.
ncr53c8xx_reset: pid=55445 reset_flags=1 serial_number=0
serial_number_at_timeout=0
scsi0: device driver called scsi_done() for a syncronous reset.
ncr53c810a-0: restart (scsi reset).
ncr53c810a-0-<3,*>: asynchronous.
sr0: CD-ROM not ready. Make sure you have a disc in the drive.
CD-ROM I/O error: dev 0b:00, sector 272580
Device not ready. Make sure there is a disc in the drive.


This is on a fourth attempt to read 250Mb from a disk. Previous ones
produced different results in md5sum.

kernel 2.2.9, compiled with egcs-2.91.60.

The recording is going ok though.

I still suspect that the fact that scsi adapter does not have active
termination plays a role.

Vladimir Dergachev

PS I know of the patch posted here earlier but it is for scsi disks and
this is cdrom.





-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:52    [W:0.875 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site