Messages in this thread | | | Date | Mon, 24 May 1999 23:12:21 +0200 (MET DST) | From | (Guest section DW) | Subject | Re: bogus IDE disk geometry, what to do? |
| |
From: Giuliano P Procida <myxie@debian.org>
I have set this oldish BIOS to "auto".
For Linux-only disks, "normal" is best. Then no translations are done, and the largest number of kernels handles the thing. (And moreover, no tiny fraction is lost by rounding.)
These are CHS values reported by default, using kernel 2.2.9 and hdparm 3.5:
hdparm 3.5 prints nonsense for LBA CHS. Use an older version of hdparm or ignore this part of the output.
hdparm -I (raw) LBA CHS 1023/256/63
hdparm -i (cooked) LBA CHS 513/510/63
The drives work fine when forced to 16383,16,63.
Yes, that is probably what you would have gotten from "normal". This is best for Linux-only. If you also have DOS or so, then 1024/255/63 is probably best.
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |