Messages in this thread | | | Date | Mon, 26 Apr 1999 03:45:39 -0700 (PDT) | From | g@gig ... | Subject | scsi emulation (2.2.6) |
| |
Hi,
I was trying out the scsi-emulation on my ide zip drive and I got errors. Here is how it goes. First it was dected fine during the boot.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices scsi : 1 host. Vendor: IOMEGA Model: ZIP 100 Rev: 23.D Type: Direct-Access ANSI SCSI revision: 00 Detected scsi removable disk sda at scsi0, channel 0, id 0, lun 0 scsi : detected 1 SCSI disk total. SCSI device sda: hdwr sector= 512 bytes. Sectors= 196608 [96 MB] [0.1 GB] sda: Write Protect is off
but later on I got error.. (still the booting process..)
Partition check: sda: sda1 hda: hda1 hda2 < hda5 hda6 > hdb:<3>ide-scsi: hdb: unsupported command in request queue (0) end_request: I/O error, dev 03:40 (hdb), sector 0 unable to read partition table
and from there on I kept getting errors like this
ide-scsi: hdb: unsupported command in request queue (0) end_request: I/O error, dev 03:40 (hdb), sector 2 VFS: Disk change detected on device ide0(3,64) hdb:<3>ide-scsi: hdb: unsupported command in request queue (0) end_request: I/O error, dev 03:40 (hdb), sector 0 unable to read partition table ide-scsi: hdb: unsupported command in request queue (0) end_request: I/O error, dev 03:40 (hdb), sector 0 FAT bread failed VFS: Disk change detected on device ide0(3,64) hdb:<3>ide-scsi: hdb: unsupported command in request queue (0)
every time I tried to mount the zip drive. I thought maybe the disk was corrupted. so I tried a different disk and tried to format by running 'mkfs -t ext2 /dev/hdb' and then it chewed up all the memory and swap pretty efficiently. 128MB mem and 128 swap was gone in a flash. All of which returned as soon as I stopped mkfs.
Any clues? I attached the .config file in case I am doing something wrong..
Thanx!
Ji Lee
------------------------- .config ------------------------------------
# # Automatically generated make config: don't edit #
# # Code maturity level options # CONFIG_EXPERIMENTAL=y
# # Processor type and features # # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set CONFIG_M586TSC=y # CONFIG_M686 is not set CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_TSC=y # CONFIG_MATH_EMULATION is not set # CONFIG_MTRR is not set # CONFIG_SMP is not set
# # Loadable module support # CONFIG_MODULES=y CONFIG_MODVERSIONS=y CONFIG_KMOD=y
# # General setup # CONFIG_NET=y CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_QUIRKS=y # CONFIG_PCI_OPTIMIZE is not set CONFIG_PCI_OLD_PROC=y # CONFIG_MCA is not set # CONFIG_VISWS is not set CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_SYSCTL=y CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y # CONFIG_BINFMT_JAVA is not set CONFIG_PARPORT=y CONFIG_PARPORT_PC=y # CONFIG_PARPORT_OTHER is not set # CONFIG_APM is not set
# # Plug and Play support # CONFIG_PNP=y CONFIG_PNP_PARPORT=y
# # Block devices # CONFIG_BLK_DEV_FD=y CONFIG_BLK_DEV_IDE=y
# # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set CONFIG_BLK_DEV_IDESCSI=y CONFIG_BLK_DEV_CMD640=y # CONFIG_BLK_DEV_CMD640_ENHANCED is not set CONFIG_BLK_DEV_RZ1000=y CONFIG_BLK_DEV_IDEPCI=y CONFIG_BLK_DEV_IDEDMA=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_IDEDMA_AUTO=y # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_VIA82C586 is not set # CONFIG_BLK_DEV_CMD646 is not set # CONFIG_IDE_CHIPSETS is not set
# # Additional Block Devices # # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_MD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_XD is not set CONFIG_PARIDE_PARPORT=y # CONFIG_PARIDE is not set # CONFIG_BLK_DEV_HD is not set
# # Networking options # CONFIG_PACKET=y CONFIG_NETLINK=y # CONFIG_RTNETLINK is not set CONFIG_NETLINK_DEV=y CONFIG_FIREWALL=y # CONFIG_FILTER is not set CONFIG_UNIX=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set CONFIG_IP_FIREWALL=y CONFIG_IP_FIREWALL_NETLINK=y CONFIG_NETLINK_DEV=y CONFIG_IP_ALWAYS_DEFRAG=y # CONFIG_IP_TRANSPARENT_PROXY is not set CONFIG_IP_MASQUERADE=y
# # Protocol-specific masquerading support will be built as modules. # CONFIG_IP_MASQUERADE_ICMP=y
# # Protocol-specific masquerading support will be built as modules. # CONFIG_IP_MASQUERADE_MOD=y CONFIG_IP_MASQUERADE_IPAUTOFW=y CONFIG_IP_MASQUERADE_IPPORTFW=y CONFIG_IP_MASQUERADE_MFW=y # CONFIG_IP_ROUTER is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set CONFIG_IP_ALIAS=y CONFIG_SYN_COOKIES=y
# # (it is safe to leave these untouched) # # CONFIG_INET_RARP is not set CONFIG_SKB_LARGE=y # CONFIG_IPV6 is not set
# # # # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_BRIDGE is not set # CONFIG_LLC is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # CONFIG_CPU_IS_SLOW is not set
# # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set
# # SCSI support # CONFIG_SCSI=y
# # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y
# # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set
# # SCSI low-level drivers # # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_AM53C974 is not set # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_DMA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_G_NCR5380_PORT is not set # CONFIG_SCSI_G_NCR5380_MEM is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_NCR53C7xx is not set # CONFIG_SCSI_NCR53C8XX is not set # CONFIG_SCSI_SYM53C8XX is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PCI2000 is not set # CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_SEAGATE is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_DEBUG is not set
# # Network device support # CONFIG_NETDEVICES=y # CONFIG_ARCNET is not set CONFIG_DUMMY=y # CONFIG_EQUALIZER is not set # CONFIG_ETHERTAP is not set CONFIG_NET_ETHERNET=y CONFIG_NET_VENDOR_3COM=y # CONFIG_EL1 is not set # CONFIG_EL2 is not set # CONFIG_ELPLUS is not set # CONFIG_EL16 is not set # CONFIG_EL3 is not set # CONFIG_3C515 is not set CONFIG_VORTEX=y # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_RTL8139 is not set # CONFIG_YELLOWFIN is not set # CONFIG_ACENIC is not set # CONFIG_NET_ISA is not set # CONFIG_NET_EISA is not set # CONFIG_NET_POCKET is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_DLCI is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_RADIO is not set # CONFIG_TR is not set # CONFIG_SHAPER is not set # CONFIG_HOSTESS_SV11 is not set # CONFIG_COSA is not set # CONFIG_RCPCI is not set
# # Amateur Radio support # # CONFIG_HAMRADIO is not set
# # IrDA subsystem support # # CONFIG_IRDA is not set
# # ISDN subsystem # # CONFIG_ISDN is not set
# # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set
# # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_SERIAL=y # CONFIG_SERIAL_CONSOLE is not set # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_UNIX98_PTYS is not set CONFIG_PRINTER=y CONFIG_PRINTER_READBACK=y CONFIG_MOUSE=y
# # Mice # # CONFIG_ATIXL_BUSMOUSE is not set # CONFIG_BUSMOUSE is not set # CONFIG_MS_BUSMOUSE is not set CONFIG_PSMOUSE=y # CONFIG_82C710_MOUSE is not set # CONFIG_PC110_PAD is not set # CONFIG_QIC02_TAPE is not set # CONFIG_WATCHDOG is not set # CONFIG_NVRAM is not set # CONFIG_RTC is not set
# # Video For Linux # # CONFIG_VIDEO_DEV is not set
# # Joystick support # # CONFIG_JOYSTICK is not set # CONFIG_DTLK is not set
# # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set # CONFIG_FT_NORMAL_DEBUG is not set # CONFIG_FT_FULL_DEBUG is not set # CONFIG_FT_NO_TRACE is not set # CONFIG_FT_NO_TRACE_AT_ALL is not set # CONFIG_FT_STD_FDC is not set # CONFIG_FT_MACH2 is not set # CONFIG_FT_PROBE_FC10 is not set # CONFIG_FT_ALT_FDC is not set
# # Filesystems # # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y # CONFIG_UMSDOS_FS is not set CONFIG_VFAT_FS=y CONFIG_ISO9660_FS=y CONFIG_JOLIET=y # CONFIG_MINIX_FS is not set CONFIG_NTFS_FS=y # CONFIG_NTFS_RW is not set # CONFIG_HPFS_FS is not set CONFIG_PROC_FS=y # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_EXT2_FS=y # CONFIG_SYSV_FS is not set CONFIG_UFS_FS=y # CONFIG_UFS_FS_WRITE is not set
# # Network File Systems # # CONFIG_CODA_FS is not set CONFIG_NFS_FS=y CONFIG_NFSD=y # CONFIG_NFSD_SUN is not set CONFIG_SUNRPC=y CONFIG_LOCKD=y CONFIG_SMB_FS=y CONFIG_SMB_WIN95=y # CONFIG_NCP_FS is not set
# # Partition Types # CONFIG_BSD_DISKLABEL=y # CONFIG_MAC_PARTITION is not set # CONFIG_SMD_DISKLABEL is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set CONFIG_NLS=y
# # Native Language Support # CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_874 is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set
# # Console drivers # CONFIG_VGA_CONSOLE=y CONFIG_VIDEO_SELECT=y # CONFIG_MDA_CONSOLE is not set # CONFIG_FB is not set
# # Sound # # CONFIG_SOUND is not set
# # Kernel hacking # # CONFIG_MAGIC_SYSRQ is not set
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |