Messages in this thread | | | From | "Langis, Richard" <> | Subject | RE: eepro100 frame errors with SMP | Date | Thu, 11 Mar 1999 16:46:25 -0800 |
| |
I'm no expert on anything, but I DO have a quad-processor system with one Pro/100B and one Pro/100+, running kernel 2.2.0. ifconfig shows no TX (or RX, for that matter) errors. cat /proc/pci shows latency at 128 for both adapters. Unfortunately I don't have a Cisco switch hooked up to this machine - I had to give up our 5500 temporarily - so I don't have any data from there, but everything is working fine.
I also have a dual-processor system running 2.2.2 with one proB and it shows very low errors/collisions (under 5).
It's probably not the driver.
-Richard
> Alan Cox wrote: > > > >So what on your bus has a PCI latency set to 240/248 ? 8) > > > > > > I have no idea what that means. Is this something I can > play with in /proc? > > > > cat /proc/pci look at the Latency values - its how long > devices are allowed > > to hog the PCI bus > > I suspect that it is the CPU (s) that is (are) hogging the system > bus/memory. > > Roger.
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |