Messages in this thread | | | Date | Fri, 10 Dec 1999 18:55:44 +0100 | From | Harald Dunkel <> | Subject | SCSI DVD drive blocks (Pioneer DVD-303S) |
| |
Hi folks,
I've got a problem with my brand new DVD drive (Pioneer DVD 303S):
Immediately after mounting a CDROM I can access all files as usual. After a few minutes idle time the drive stops rotating. Now, when I access the CD, the drive does NOT immediately spin up. Instead, I get the following messages in /var/log/kern.log after a about 30 seconds:
Dec 10 18:37:33 bilbo kernel: scsi : aborting command due to timeout : pid 4538, scsi0, channel 0, id 2, lun 0 Read (10) 00 00 00 00 9b 00 00 0f 00 Dec 10 18:38:03 bilbo kernel: SCSI host 0 abort (pid 4538) timed out - resetting Dec 10 18:38:03 bilbo kernel: SCSI bus is being reset for host 0 channel 0. Dec 10 18:38:07 bilbo kernel: (scsi0:0:2:0) Synchronous at 10.0 Mbyte/sec, offset 8. Dec 10 18:38:07 bilbo kernel: (scsi0:0:2:0) Performing Domain validation. Dec 10 18:38:07 bilbo kernel: (scsi0:0:2:0) Successfully completed Domain validation. Dec 10 18:38:07 bilbo kernel: sr0: CD-ROM not ready. Make sure you have a disc in the drive. Dec 10 18:38:07 bilbo kernel: CD-ROM I/O error: dev 0b:00, sector 620 Dec 10 18:38:07 bilbo kernel: sr0: CD-ROM not ready. Make sure you have a disc in the drive. : :
Of course I cannot access the files I expected.
This happens with 2.2.13 as well as with 2.2.14-pre10. I will try the latest 2.2.x kernel now, but I am not very optimistic in this case.
Any ideas? Your help would be highly appreciated.
Regards
Harri -- Harald Dunkel | harri@Synopsys.COM | If your operating system seems to Synopsys GmbH | Kaiserstr. 100 | be made by Dr. Frankenstein, then 52134 Herzogenrath, Germany | it is time for a change. +49 2407 9558 (fax? 44: 0) | Try Linux!
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |