lkml.org 
[lkml]   [1999]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectSerial port problem under 2.1.132 and 2.2.0pre5
Hello,

Parden me if this msg has been answered already. Can someone point me to
the kernel message archive?

Here is my problem:
I am loosing characters when I use minicom and use mouse to cut/paste
the AT commands. Command such as 'AT+FCLASS=?', when I type it on
minicom works fine, but when I cut/paste it I only get ATC or ATF
and nothing more.
kernel 2.0.36 doesn't have this behavior.

Earlier problem:
I noticed the problem when I was installing hylafax when 'faxaddmodem'
could not be completed due to the error while detecting the class of
my fax modem (USR Sportster 28.8, supports CLASS 1,2.0). 'faxaddmodem'
uses "AT+FCLASS=?" command to detect the class of modem.

Setting:
Slakcware-3.5, libc5.4.46, gcc2.7.2.3, XF86-3.3.3
in rc.local: "setserial /dev/ttyS0 irq 4 port 0x3f8 uart 16550"
motherboard is an old Intel Triton, using internal serial port.
Modem and serial port functions well.
I havn't tried using ppp under 2.[1|2].*

Thanks in adv., ;)

Sang Kang

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:49    [W:0.017 / U:0.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site