Messages in this thread | | | Date | Thu, 6 Aug 1998 23:20:39 -0500 (CDT) | From | "Andre M. Hedrick" <> | Subject | 10 of 12 IDE-Devices :: Believe IT or NOT |
| |
Here is the proof that it works.............. I ran out of cables or there would be an additional CDROM and HDrive, and will post a patch later............"2.1.115.ide.patch" Lastly, I will send a report from MINGO's mptable.c for SMP.
Regards, Andre Hedrick Dyer Observatory, Vanderbilt University
Please consider adding this to the source folks...........
AEC6210: IDE controller on PCI bus 00 dev a0 AEC6210: not 100% native mode: will probe irqs later AEC6210: ROM enabled at 0xfebf8000 AutoDMA enabled ide0: BM-DMA at 0xef90-0xef97, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xef98-0xef9f, BIOS settings: hdc:pio, hdd:pio PDC20246: IDE controller on PCI bus 00 dev 98 PDC20246: 100% native mode on irq 18 ide2: BM-DMA at 0xef40-0xef47, BIOS settings: hde:DMA, hdf:DMA ide3: BM-DMA at 0xef48-0xef4f, BIOS settings: hdg:DMA, hdh:DMA HPT343: ignored by ide_scan_pci_device() (uses own driver) PIIX3: IDE controller on PCI bus 00 dev 39 PIIX3: device not capable of full native PCI mode PIIX3: device disabled (BIOS) HPT343: BaseAddress 0x0000ee80 w/ IRQ(17) AutoDMA enabled ide4: BM-DMA at 0xee80-0xee87, BIOS settings: hdi:pio, hdj:pio ide5: BM-DMA at 0xee88-0xee8f, BIOS settings: hdk:pio, hdl:pio hda: QUANTUM FIREBALL ST6.4A, ATA DISK drive hdb: QUANTUM FIREBALL ST3.2A, ATA DISK drive hdc: CD-ROM CDU611, ATAPI CDROM drive hdd: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive hde: Maxtor 72004 AP, ATA DISK drive hdf: Maxtor 71626 A, ATA DISK drive hdg: WDC AC2340H, ATA DISK drive hdh: WDC AC2340F, ATA DISK drive hdi: WDC AC140, ATA DISK drive hdj: WDC AC140, ATA DISK drive ide0 at 0xeff0-0xeff7,0xefe6 on irq 19 ide1 at 0xefa8-0xefaf,0xefe2 on irq 19 (shared with ide0) ide2 at 0xefa0-0xefa7,0xef8e on irq 18 ide3 at 0xef80-0xef87,0xef8a on irq 18 ide4 at 0xeea0-0xeea7,0xeeb6 on irq 17 hda: QUANTUM FIREBALL ST6.4A, 6149MB w/81kB Cache, CHS=784/255/63, UDMA hdb: QUANTUM FIREBALL ST3.2A, 3079MB w/81kB Cache, CHS=782/128/63, UDMA hde: Maxtor 72004 AP, 1916MB w/128kB Cache, CHS=973/64/63, DMA hdf: Maxtor 71626 A, 1554MB w/64kB Cache, CHS=789/64/63, DMA hdg: WDC AC2340H, 325MB w/128kB Cache, CHS=1010/12/55, DMA hdh: WDC AC2340F, 325MB w/64kB Cache, CHS=1010/12/55, DMA hdi: WDC AC140, 40MB w/31kB Cache, CHS=980/5/17 hdj: WDC AC140, 40MB w/31kB Cache, CHS=980/5/17 hdc: ATAPI 10X CDROM drive, 256kB Cache Uniform CDROM driver Revision: 2.13 hdd: 98304kB, 196608 blocks, 512 sector size hdd: 98304kB, 32/64/96 CHS, 4096 kBps, 512 sector size, 2941 rpm Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 Partition check: hda: hda1 hda2 hda3 hda4 hdb: hdb1 hdb2 hdd: hdd1 hde: hde1 hdf: hdf1 hdg: hdg1 hdh: hdh1 hdi: hdi1 hdj: hdj1 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 44k freed
/proc/interrupts output:
CPU0 CPU1 0: 57687 0 XT-PIC timer 1: 1435 1200 IO-APIC-edge keyboard 2: 0 0 XT-PIC cascade 3: 9363 5821 IO-APIC-edge serial 4: 2505 2189 IO-APIC-edge serial 5: 0 2 IO-APIC-edge soundblaster 8: 0 1 IO-APIC-edge rtc 12: 1399 1841 IO-APIC-edge PS/2 Mouse 13: 1 0 XT-PIC fpu 17: 4 5 IO-APIC-level ide4 18: 9 8 IO-APIC-level ide2, ide3 19: 1633 1633 IO-APIC-level ide0 NMI: 0 IPI: 0
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.altern.org/andrebalsa/doc/lkml-faq.html
| |