Messages in this thread | | | Date | Wed, 05 Apr 2006 22:07:37 +0200 | From | l7or <> | Subject | bug-report (kernel-oops) |
| |
1. After having watched a movie with kaffeine-0.8.1 using xine-lib-1.1.1 I got a kernel-oops when closing kaffeine 2. After the kernel-oops I was able to continue to use the system without problems. I went online with a normal 56K-Modem connected to the pl2303-USB2Serial-Converter. After having been online for a while I got the following message from my internet-connection-program (slylcr): "appear to have received our own echo-reply!" (I don't know whether this has to do with the kernel-oops, but I never got that message before... Perhaps the problem is related to my vp7045 (TwinhanDTV-Alpha-DVB-T-Card), I had it connected to the computer but I removed it when it wasn't needed any more. However kaffeine might have been started with the card connected and closed with the card having been removed while kaffeine was running...
4./7.1 Linux Notebook 2.6.16.1 #1 Thu Mar 30 19:54:24 CEST 2006 x86_64 x86_64 x86_64 GNU/Linux
Gnu C 4.0.2 Gnu make 3.80 binutils 2.16.91.0.2 util-linux 2.12q mount 2.12q module-init-tools 3.2-pre8 e2fsprogs 1.38 jfsutils 1.1.8 reiserfsprogs 3.6.18 reiser4progs 1.0.5 PPP 2.4.3 nfs-utils 1.0.7 Linux C Library 2.3.5 Dynamic linker (ldd) 2.3.5 Linux C++ Library 6.0.6 Procps 3.2.5 Net-tools 1.60 Kbd 1.12 Sh-utils 5.3.0 udev 068 Modules Loaded ppp_async crc_ccitt ppp_generic slhc pl2303 ntfs dvb_usb_vp7045 dvb_usb dvb_core dvb_pll isofs udf loop
5. Apr 5 21:17:09 Notebook kernel: Unable to handle kernel paging request at ffffc20000065060 RIP: Apr 5 21:17:09 Notebook kernel: <ffffffff8803ed10>{:dvb_core:dvb_demux_release+15} Apr 5 21:17:09 Notebook kernel: PGD 1fae067 PUD 1fad067 PMD 1fac067 PTE 0 Apr 5 21:17:09 Notebook kernel: Oops: 0000 [1] Apr 5 21:17:09 Notebook kernel: CPU 0 Apr 5 21:17:09 Notebook kernel: Modules linked in: ntfs dvb_usb_vp7045 dvb_usb dvb_core dvb_pll isofs udf ppp_async crc_ccitt ppp_generic slhc pl2303 loop Apr 5 21:17:09 Notebook kernel: Pid: 6908, comm: kaffeine Not tainted 2.6.16.1 #1 Apr 5 21:17:09 Notebook kernel: RIP: 0010:[<ffffffff8803ed10>] <ffffffff8803ed10>{:dvb_core:dvb_demux_release+15} Apr 5 21:17:09 Notebook kernel: RSP: 0018:ffff810005ae9ed8 EFLAGS: 00010282 Apr 5 21:17:09 Notebook kernel: RAX: ffffffff8803ed01 RBX: ffffc20000065000 RCX: 0000000000000000 Apr 5 21:17:09 Notebook kernel: RDX: 0000000000000000 RSI: ffff8100223f04c0 RDI: ffff81000364db00 Apr 5 21:17:09 Notebook kernel: RBP: ffff8100223f04c0 R08: 000000000000000a R09: 0000000000001afc Apr 5 21:17:09 Notebook kernel: R10: 00007fffffded0b8 R11: 0000000000000206 R12: ffff81000364db00 Apr 5 21:17:09 Notebook kernel: R13: ffff81000364db00 R14: ffff810001fbf280 R15: ffff81003ad160c0 Apr 5 21:17:09 Notebook kernel: FS: 00002b8cc07ec620(0000) GS:ffffffff80420000(0000) knlGS:00000000562e27e0 Apr 5 21:17:09 Notebook kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b Apr 5 21:17:09 Notebook kernel: CR2: ffffc20000065060 CR3: 0000000006040000 CR4: 00000000000006e0 Apr 5 21:17:09 Notebook kernel: Process kaffeine (pid: 6908, threadinfo ffff810005ae8000, task ffff81000c6ba890) Apr 5 21:17:09 Notebook kernel: Stack: 0000000000000206 0000000000000008 ffff8100223f04c0 ffff81000364db00 Apr 5 21:17:09 Notebook kernel: ffff81000364db00 ffffffff80157112 ffff81001e44dc40 ffff8100223f04c0 Apr 5 21:17:09 Notebook kernel: 0000000000000000 ffff81001e44dc40 Apr 5 21:17:09 Notebook kernel: Call Trace: <ffffffff80157112>{__fput+168} <ffffffff801550b9>{filp_close+89} Apr 5 21:17:09 Notebook kernel: <ffffffff801558a1>{sys_close+112} <ffffffff8010a4ea>{system_call+126} Apr 5 21:17:09 Notebook kernel: Apr 5 21:17:09 Notebook kernel: Code: 4c 8b 6b 60 e8 7c d8 2b f8 49 8d 6d 68 48 89 ef 41 ff 4d 68 Apr 5 21:17:09 Notebook kernel: RIP <ffffffff8803ed10>{:dvb_core:dvb_demux_release+15} RSP <ffff810005ae9ed8> Apr 5 21:17:09 Notebook kernel: CR2: ffffc20000065060
6. - 7. SuSE Linux 10.0 with many updated packages I did compile kaffeine and xine myself, I didn't take the RPMs
7.2 processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 4 model name : AMD Athlon(tm) 64 Processor 3400+ stepping : 10 cpu MHz : 800.000 cache size : 1024 KB fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext lm 3dnowext 3dnow bogomips : 1597.84 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp
7.3 see 4.
7.4
/proc/iomem:
00000000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000cffff : Video ROM 000d0000-000d9fff : Adapter ROM 000f0000-000fffff : System ROM 00100000-3ffcffff : System RAM 00100000-002ffbaa : Kernel code 002ffbab-003e73bf : Kernel data 3ffd0000-3ffdefff : ACPI Tables 3ffdf000-3fffffff : ACPI Non-volatile Storage 50000000-51ffffff : PCI CardBus #02 52000000-53ffffff : PCI CardBus #02 54000000-55ffffff : PCI CardBus #06 56000000-57ffffff : PCI CardBus #06 58000000-58000fff : 0000:00:09.0 58001000-58001fff : 0000:00:09.1 e0000000-e7ffffff : 0000:00:00.0 e0000000-e7ffffff : aperture ee900000-fe8fffff : PCI Bus #01 f0000000-f7ffffff : 0000:01:00.0 f0000000-f7ffffff : radeonfb framebuffer fea00000-feafffff : PCI Bus #01 feac0000-feadffff : 0000:01:00.0 feaf0000-feafffff : 0000:01:00.0 feaf0000-feafffff : radeonfb mmio febc0000-febdffff : 0000:00:04.0 febf4000-febf7fff : 0000:00:06.0 febf8000-febf9fff : 0000:00:0b.0 febfa000-febfafff : 0000:00:09.2 febfb800-febfbfff : 0000:00:06.0 febfc000-febfcfff : 0000:00:04.0 febfc000-febfcfff : sis900 febfd000-febfdfff : 0000:00:03.0 febfd000-febfdfff : ohci_hcd febfe000-febfefff : 0000:00:03.1 febfe000-febfefff : ohci_hcd febff000-febfffff : 0000:00:03.3 febff000-febfffff : ehci_hcd fff80000-ffffffff : reserved
/proc/ioports:
0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0376-0376 : ide1 03c0-03df : vga+ 03f6-03f6 : ide0 0800-0803 : PM1a_EVT_BLK 0804-0805 : PM1a_CNT_BLK 0808-080b : PM_TMR 0810-0815 : ACPI CPU throttle 0816-0816 : PM2_CNT_BLK 0820-0823 : GPE0_BLK 0830-0833 : GPE1_BLK 0cf8-0cff : PCI conf1 1000-10ff : PCI CardBus #02 1400-14ff : PCI CardBus #02 1800-18ff : PCI CardBus #06 1c00-1cff : PCI CardBus #06 c000-cfff : PCI Bus #01 c800-c8ff : 0000:01:00.0 d800-d8ff : 0000:00:04.0 d800-d8ff : sis900 e000-e07f : 0000:00:02.6 e400-e4ff : 0000:00:02.6 e800-e8ff : 0000:00:02.7 e800-e8ff : SiS SI7012 ec00-ec7f : 0000:00:02.7 ec00-ec7f : SiS SI7012 ffa0-ffaf : 0000:00:02.5 ffa0-ffa7 : ide0 ffa8-ffaf : ide1
7.5
lspci -vvv 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 755 Host (rev 01) Subsystem: Silicon Integrated Systems [SiS] 755 Host Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 32 Region 0: Memory at 00000000e0000000 (32-bit, non-prefetchable) [size=128M] Capabilities: [a0] AGP version 3.0 Status: RQ=32 Iso- ArqSz=2 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none> Capabilities: [d0] HyperTransport: Slave or Primary Interface !!! Possibly incomplete decoding Command: BaseUnitID=0 UnitCnt=9 MastHost- DefDir- Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC+ TXO- <CRCErr=0 Link Config 0: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 Link Config 1: MLWI=N/C MLWO=N/C LWI=N/C LWO=N/C Revision ID: 1.02 Capabilities: [f0] HyperTransport: Interrupt Discovery and Configuration
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202 (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fea00000-feafffff Prefetchable memory behind bridge: ee900000-fe8fffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 25) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 80 [Master]) Subsystem: Fujitsu Siemens Computer GmbH: Unknown device 105f Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 128 Region 4: I/O ports at ffa0 [size=16]
00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0) (prog-if 00 [Generic]) Subsystem: Fujitsu Siemens Computer GmbH: Unknown device 105f Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (13000ns min, 2750ns max) Interrupt: pin C routed to IRQ 10 Region 0: I/O ports at e400 [size=256] Region 1: I/O ports at e000 [size=128] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0) Subsystem: Fujitsu Siemens Computer GmbH: Unknown device 105f Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (13000ns min, 2750ns max) Interrupt: pin C routed to IRQ 22 Region 0: I/O ports at e800 [size=256] Region 1: I/O ports at ec00 [size=128] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI]) Subsystem: Fujitsu Siemens Computer GmbH: Unknown device 105f Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (20000ns max) Interrupt: pin A routed to IRQ 20 Region 0: Memory at 00000000febfd000 (32-bit, non-prefetchable) [size=4K]
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI]) Subsystem: Fujitsu Siemens Computer GmbH: Unknown device 105f Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (20000ns max) Interrupt: pin B routed to IRQ 21 Region 0: Memory at 00000000febfe000 (32-bit, non-prefetchable) [size=4K]
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20 [EHCI]) Subsystem: Fujitsu Siemens Computer GmbH: Unknown device 105f Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (20000ns max) Interrupt: pin D routed to IRQ 19 Region 0: Memory at 00000000febff000 (32-bit, non-prefetchable) [size=4K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91) Subsystem: Fujitsu Siemens Computer GmbH: Unknown device 105f Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (13000ns min, 2750ns max) Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at d800 [size=256] Region 1: Memory at 00000000febfc000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at 00000000febc0000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI]) Subsystem: Fujitsu Siemens Computer GmbH: Unknown device 105f Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (500ns min, 1000ns max), Cache Line Size 10 Interrupt: pin A routed to IRQ 5 Region 0: Memory at 00000000febfb800 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at 00000000febf4000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.0 CardBus bridge: O2 Micro, Inc. OZ711M1/MC1 4-in-1 MemoryCardBus Controller (rev 20) Subsystem: Fujitsu Siemens Computer GmbH: Unknown device 105f Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Interrupt: pin A routed to IRQ 16 Region 0: Memory at 0000000058000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=02, subordinate=05, sec-latency=176 Memory window 0: 50000000-51fff000 (prefetchable) Memory window 1: 52000000-53fff000 I/O window 0: 00001000-000010ff I/O window 1: 00001400-000014ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite- 16-bit legacy interface ports at 0001
00:09.1 CardBus bridge: O2 Micro, Inc. OZ711M1/MC1 4-in-1 MemoryCardBus Controller (rev 20) Subsystem: Fujitsu Siemens Computer GmbH: Unknown device 105f Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Interrupt: pin A routed to IRQ 16 Region 0: Memory at 0000000058001000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=06, subordinate=09, sec-latency=176 Memory window 0: 54000000-55fff000 (prefetchable) Memory window 1: 56000000-57fff000 I/O window 0: 00001800-000018ff I/O window 1: 00001c00-00001cff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite- 16-bit legacy interface ports at 0001
00:09.2 System peripheral: O2 Micro, Inc. OZ711Mx 4-in-1 MemoryCardBus Accelerator Subsystem: Fujitsu Siemens Computer GmbH: Unknown device 105f Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 11 Region 0: Memory at 00000000febfa000 (32-bit, non-prefetchable) [size=4K] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01) Subsystem: Micro-Star International Co., Ltd.: Unknown device 6833 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size 10 Interrupt: pin A routed to IRQ 5 Region 0: Memory at 00000000febf8000 (32-bit, non-prefetchable) [size=8K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Capabilities: [80] HyperTransport: Host or Secondary Interface !!! Possibly incomplete decoding Command: WarmRst+ DblEnd- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit Revision ID: 1.02
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] (prog-if 00 [VGA]) Subsystem: Fujitsu Siemens Computer GmbH: Unknown device 105f Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2000ns min), Cache Line Size 10 Interrupt: pin A routed to IRQ 17 Region 0: Memory at 00000000f0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at c800 [size=256] Region 2: Memory at 00000000feaf0000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at 00000000feac0000 [disabled] [size=128K] Capabilities: [58] AGP version 3.0 Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none> Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
7.6 I don't have scsi
7.7 I'm using the reiser4-patch from namesys and my root-filesystem is using the reiser4-filesystem
I'm sorry, this is my first bug-report and I'm sure I included too much worthless information. If you've still got questions/found out the reason please email me.
Regards,
Lorenz
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |