lkml.org 
[lkml]   [2006]   [Apr]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectProblems (lockup/hang) with PCI-X slot on X5DPL motherboard
Date
I'm getting to my wits end, so any help would be greatly appreciated.

I've got two disk servers, on with SuperMicro X5DPL-iGM motherboard, the
other with a X5DPL-TGM board. These system use the E7501 chipset, and
provide to PCI-X buses. One for slots 4 and 5, the other for slot 6 and
the embedded Intel 82545EM GigE NIC.

I have had nothing but trouble trying to use slot 6 on these machines.
Recently I've been trying with a MV88SX6081 133MHz PCI-X card. In both
machines I get lockups when trying to use the controller. I also see
corruption on the on-board NIC on the TGM (though not on the iGM) with
the card in slot 6.

I'm running Fedora Core 4 with kernel 2.6.12-1.1456_FC4smp and mv_sata
driver 3.6.1. I'm stuck on the older kernel because of the mv_sata driver.

Now, maybe this is all the fault of the mv_sata driver, but I believe I
had problems on the iGM machine with a Intel 82545GM PCI-X nic in slot 6
as well which does not use the mv_sata driver at all normally.

Thoughts?

- Orion

--
Orion Poplawski
System Administrator 303-415-9701 x222
Colorado Research Associates/NWRA FAX: 303-415-9702
3380 Mitchell Lane, Boulder CO 80301 http://www.co-ra.com

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-04-15 01:18    [W:0.027 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site