lkml.org 
[lkml]   [2024]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 01/12] soc: qcom: add firmware name helper
On Tue, 21 May 2024 at 12:52, <neil.armstrong@linaro.org> wrote:
>
> On 21/05/2024 11:45, Dmitry Baryshkov wrote:
> > Qualcomm platforms have different sets of the firmware files, which
> > differ from platform to platform (and from board to board, due to the
> > embedded signatures). Rather than listing all the firmware files,
> > including full paths, in the DT, provide a way to determine firmware
> > path based on the root DT node compatible.
>
> Ok this looks quite over-engineered but necessary to handle the legacy,
> but I really think we should add a way to look for a board-specific path
> first and fallback to those SoC specific paths.

Again, CONFIG_FW_LOADER_USER_HELPER => delays.

>
> Neil
>
> >
> > Suggested-by: Arnd Bergmann <arnd@arndb.de>
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> > ---
> > drivers/soc/qcom/Kconfig | 5 +++
> > drivers/soc/qcom/Makefile | 1 +
> > drivers/soc/qcom/qcom_fw_helper.c | 86 ++++++++++++++++++++++++++++++++++++++
> > include/linux/soc/qcom/fw_helper.h | 10 +++++
> > 4 files changed, 102 insertions(+)
> >
> > diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
> > index 5af33b0e3470..b663774d65f8 100644
> > --- a/drivers/soc/qcom/Kconfig
> > +++ b/drivers/soc/qcom/Kconfig
> > @@ -62,6 +62,11 @@ config QCOM_MDT_LOADER
> > tristate
> > select QCOM_SCM
> >
> > +config QCOM_FW_HELPER
> > + tristate "NONE FW HELPER"
> > + help
> > + Helpers to return platform-specific location for the firmware files.
> > +
> > config QCOM_OCMEM
> > tristate "Qualcomm On Chip Memory (OCMEM) driver"
> > depends on ARCH_QCOM
> > diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
> > index ca0bece0dfff..e612bee5b955 100644
> > --- a/drivers/soc/qcom/Makefile
> > +++ b/drivers/soc/qcom/Makefile
> > @@ -6,6 +6,7 @@ obj-$(CONFIG_QCOM_GENI_SE) += qcom-geni-se.o
> > obj-$(CONFIG_QCOM_COMMAND_DB) += cmd-db.o
> > obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o
> > obj-$(CONFIG_QCOM_MDT_LOADER) += mdt_loader.o
> > +obj-$(CONFIG_QCOM_FW_HELPER) += qcom_fw_helper.o
> > obj-$(CONFIG_QCOM_OCMEM) += ocmem.o
> > obj-$(CONFIG_QCOM_PDR_HELPERS) += pdr_interface.o
> > obj-$(CONFIG_QCOM_PMIC_GLINK) += pmic_glink.o
> > diff --git a/drivers/soc/qcom/qcom_fw_helper.c b/drivers/soc/qcom/qcom_fw_helper.c
> > new file mode 100644
> > index 000000000000..13123c2514b8
> > --- /dev/null
> > +++ b/drivers/soc/qcom/qcom_fw_helper.c
> > @@ -0,0 +1,86 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Qualcomm Firmware loading data
> > + *
> > + * Copyright (C) 2024 Linaro Ltd
> > + */
> > +
> > +#include <linux/cleanup.h>
> > +#include <linux/device.h>
> > +#include <linux/mutex.h>
> > +#include <linux/of.h>
> > +#include <linux/soc/qcom/fw_helper.h>
> > +
> > +static DEFINE_MUTEX(qcom_fw_mutex);
> > +static const char *fw_path;
> > +
> > +static const struct of_device_id qcom_fw_paths[] = {
> > + /* device-specific entries */
> > + { .compatible = "thundercomm,db845c", .data = "qcom/sdm845/Thundercomm/db845c", },
> > + { .compatible = "qcom,qrb5165-rb5", .data = "qcom/sm8250/Thundercomm/RB5", },
> > + /* SoC default entries */
> > + { .compatible = "qcom,apq8016", .data = "qcom/apq8016", },
> > + { .compatible = "qcom,apq8096", .data = "qcom/apq8096", },
> > + { .compatible = "qcom,sdm845", .data = "qcom/sdm845", },
> > + { .compatible = "qcom,sm8250", .data = "qcom/sm8250", },
> > + { .compatible = "qcom,sm8350", .data = "qcom/sm8350", },
> > + { .compatible = "qcom,sm8450", .data = "qcom/sm8450", },
> > + { .compatible = "qcom,sm8550", .data = "qcom/sm8550", },
> > + { .compatible = "qcom,sm8650", .data = "qcom/sm8650", },
> > + {},
> > +};
> > +
> > +static int qcom_fw_ensure_init(void)
> > +{
> > + const struct of_device_id *match;
> > + struct device_node *root;
> > +
> > + if (fw_path)
> > + return 0;
> > +
> > + root = of_find_node_by_path("/");
> > + if (!root)
> > + return -ENODEV;
> > +
> > + match = of_match_node(qcom_fw_paths, root);
> > + of_node_put(root);
> > + if (!match || !match->data) {
> > + pr_notice("Platform not supported by qcom_fw_helper\n");
> > + return -ENODEV;
> > + }
> > +
> > + fw_path = match->data;
> > +
> > + return 0;
> > +}
> > +
> > +const char *qcom_get_board_fw(const char *firmware)
> > +{
> > + if (strchr(firmware, '/'))
> > + return kstrdup(firmware, GFP_KERNEL);
> > +
> > + scoped_guard(mutex, &qcom_fw_mutex) {
> > + if (!qcom_fw_ensure_init())
> > + return kasprintf(GFP_KERNEL, "%s/%s", fw_path, firmware);
> > + }
> > +
> > + return kstrdup(firmware, GFP_KERNEL);
> > +}
> > +EXPORT_SYMBOL_GPL(qcom_get_board_fw);
> > +
> > +const char *devm_qcom_get_board_fw(struct device *dev, const char *firmware)
> > +{
> > + if (strchr(firmware, '/'))
> > + return devm_kstrdup(dev, firmware, GFP_KERNEL);
> > +
> > + scoped_guard(mutex, &qcom_fw_mutex) {
> > + if (!qcom_fw_ensure_init())
> > + return devm_kasprintf(dev, GFP_KERNEL, "%s/%s", fw_path, firmware);
> > + }
> > +
> > + return devm_kstrdup(dev, firmware, GFP_KERNEL);
> > +}
> > +EXPORT_SYMBOL_GPL(devm_qcom_get_board_fw);
> > +
> > +MODULE_DESCRIPTION("Firmware helpers for Qualcomm devices");
> > +MODULE_LICENSE("GPL");
> > diff --git a/include/linux/soc/qcom/fw_helper.h b/include/linux/soc/qcom/fw_helper.h
> > new file mode 100644
> > index 000000000000..755645386bba
> > --- /dev/null
> > +++ b/include/linux/soc/qcom/fw_helper.h
> > @@ -0,0 +1,10 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +#ifndef __QCOM_FW_HELPER_H__
> > +#define __QCOM_FW_HELPER_H__
> > +
> > +struct device;
> > +
> > +const char *qcom_get_board_fw(const char *firmware);
> > +const char *devm_qcom_get_board_fw(struct device *dev, const char *firmware);
> > +
> > +#endif
> >
>


--
With best wishes
Dmitry

\
 
 \ /
  Last update: 2024-05-21 12:02    [W:0.070 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site