lkml.org 
[lkml]   [2024]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] clk: qcom: apss-ipq-pll: remove 'config_ctl_hi_val' from Stromer pll configs
From
On 10.05.2024 6:25 PM, Kathiravan Thirumoorthy wrote:
>
>
> On 5/10/2024 12:23 AM, Konrad Dybcio wrote:
>> On 9.05.2024 10:08 AM, Gabor Juhos wrote:
>>> Since the CONFIG_CTL register is only 32 bits wide in the Stromer
>>> and Stromer Plus PLLs , the 'config_ctl_hi_val' values from the
>>> IPQ5018 and IPQ5332 configurations are not used so remove those.
>>>
>>> No functional changes.
>>>
>>> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
>>> ---
>>
>> Hm, it sounds suspicious that we'd have these settings then.. Could somebody from
>> QC please confirm that everything's alright here?
>
>
> I checked the HW doc and yes in both IPQ5018 and IPQ5332 CONFIG_CTL_U register is not implemented. I see offset of CONFIG_CTL_U register is removed in the change[1] by Gabor.

Thanks

Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad

\
 
 \ /
  Last update: 2024-05-27 18:24    [W:0.241 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site