lkml.org 
[lkml]   [2024]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 2/3] dt-bindings: phy: Add i.MX8Q HSIO SerDes PHY binding
On Thu, May 09, 2024 at 01:56:20PM +0800, Richard Zhu wrote:
> Add i.MX8QM and i.MX8QXP HSIO SerDes PHY binding.
> Introduce one HSIO configuration 'fsl,hsio-cfg', which need be set at
> initialization according to board design.
>
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> ---
> .../bindings/phy/fsl,imx8qm-hsio.yaml | 142 ++++++++++++++++++
> 1 file changed, 142 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/fsl,imx8qm-hsio.yaml
>
> diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8qm-hsio.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8qm-hsio.yaml
> new file mode 100644
> index 000000000000..e8648cd9fea6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/fsl,imx8qm-hsio.yaml
> @@ -0,0 +1,142 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/fsl,imx8qm-hsio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale i.MX8QM SoC series HSIO SERDES PHY
> +
> +maintainers:
> + - Richard Zhu <hongxing.zhu@nxp.com>
> +
> +properties:
> + compatible:
> + enum:
> + - fsl,imx8qm-hsio
> + - fsl,imx8qxp-hsio
> + reg:
> + minItems: 4
> + maxItems: 4

Need to define what is each entry:

items:
- description: ...
- description: ...
- description: ...
- description: ...


> +
> + "#phy-cells":
> + const: 3
> + description:
> + The first defines lane index.
> + The second defines the type of the PHY refer to the include phy.h.
> + The third defines the controller index, indicated which controller
> + is bound to the lane.
> +
> + reg-names:
> + items:
> + - const: reg
> + - const: phy
> + - const: ctrl
> + - const: misc
> +
> + clocks:
> + minItems: 5
> + maxItems: 14
> +
> + clock-names:
> + minItems: 5
> + maxItems: 14
> +
> + fsl,hsio-cfg:
> + description: Refer macro HSIO_CFG* include/dt-bindings/phy/phy-imx8-pcie.h.

I can't, it's not in this patch. But it should be.

Please say something about what this is for, not just refer to header.

> + $ref: /schemas/types.yaml#/definitions/uint32

maximum: 3

> +
> + fsl,refclk-pad-mode:
> + description:
> + Specifies the mode of the refclk pad used. INPUT(PHY refclock is
> + provided externally via the refclk pad) or OUTPUT(PHY refclock is
> + derived from SoC internal source and provided on the refclk pad).
> + $ref: /schemas/types.yaml#/definitions/string
> + enum: [ "input", "output" ]

default?

Really, this could just be a boolean for the non-default mode.

> +
> + power-domains:
> + minItems: 1
> + maxItems: 2
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - "#phy-cells"
> + - clocks
> + - clock-names
> + - fsl,hsio-cfg
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - fsl,imx8qxp-hsio
> + then:
> + properties:
> + clock-names:
> + items:
> + - const: pclk0
> + - const: apb_pclk0
> + - const: phy0_crr
> + - const: ctl0_crr
> + - const: misc_crr
> + power-domains:
> + minItems: 1

Should be maxItems? min is already 1.

> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - fsl,imx8qm-hsio
> + then:
> + properties:
> + clock-names:
> + items:
> + - const: pclk0
> + - const: pclk1
> + - const: apb_pclk0
> + - const: apb_pclk1
> + - const: pclk2
> + - const: epcs_tx
> + - const: epcs_rx
> + - const: apb_pclk2
> + - const: phy0_crr
> + - const: phy1_crr
> + - const: ctl0_crr
> + - const: ctl1_crr
> + - const: ctl2_crr
> + - const: misc_crr
> + power-domains:
> + minItems: 2
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/imx8-clock.h>
> + #include <dt-bindings/clock/imx8-lpcg.h>
> + #include <dt-bindings/firmware/imx/rsrc.h>
> + #include <dt-bindings/phy/phy-imx8-pcie.h>
> +
> + hsio_phy@5f1a0000 {

phy@...

> + compatible = "fsl,imx8qxp-hsio";
> + reg = <0x5f1a0000 0x10000>,
> + <0x5f120000 0x10000>,
> + <0x5f140000 0x10000>,
> + <0x5f160000 0x10000>;
> + reg-names = "reg", "phy", "ctrl", "misc";
> + clocks = <&phyx1_lpcg IMX_LPCG_CLK_0>,
> + <&phyx1_lpcg IMX_LPCG_CLK_4>,
> + <&phyx1_crr1_lpcg IMX_LPCG_CLK_4>,
> + <&pcieb_crr3_lpcg IMX_LPCG_CLK_4>,
> + <&misc_crr5_lpcg IMX_LPCG_CLK_4>;
> + clock-names = "pclk0", "apb_pclk0", "phy0_crr", "ctl0_crr", "misc_crr";
> + power-domains = <&pd IMX_SC_R_SERDES_1>;
> + #phy-cells = <3>;
> + fsl,hsio-cfg = <IMX8Q_HSIO_CFG_PCIEB>;
> + fsl,refclk-pad-mode = "input";
> + };
> +...
> --
> 2.37.1
>

\
 
 \ /
  Last update: 2024-05-27 18:24    [W:0.100 / U:1.940 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site