If pt_event_stop() is called without PERF_EF_UPDATE flag, then
perf_aux_output_end() is not called.  A subsequent call to pt_event_start()
will call perf_aux_output_begin() again which violates the rule against
nesting and triggers a WARNING in perf_aux_output_begin().

Originally, pt_event_stop() was never called without PERF_EF_UPDATE,
because the only code paths to do so are from event overflow, and Intel PT
does not do that.

However the introduction of group throttling by commit 9734e25fbf5ae
("perf: Fix the throttle logic for a group") meant that an Intel PT event
could be throttled if it was part of a group.  Throttling calls PMU
 ->stop() / ->start() callbacks without flags.

An example is when AUX area sampling is used. The following commands
hit the issue:

  echo 10000 > /proc/sys/kernel/perf_event_max_sample_rate

  perf record -F32000 --aux-sample -e '{intel_pt//u,cycles:u}' \
  -- bash -c 'for i in `seq 1 100000` ; do true ; done'

Use PERF_HES_UPTODATE to track whether perf_aux_output_begin() and
perf_aux_output_end() are balanced.  A cleared PERF_HES_UPTODATE bit
indicates that an AUX output context is still open.

Amend pt_event_start() / pt_event_stop() accordingly so that begin/end
stay balanced:

 - In non-snapshot mode, stop() always closes the buffer (the buffer may
   have run out of space, and that accounting is done by the update), so
   a following start() opens a fresh one as before.

 - In snapshot/overwrite mode, stop() without PERF_EF_UPDATE leaves the
   buffer open so that pt_event_snapshot_aux() can still copy from it,
   and start() then only re-enables tracing instead of calling
   perf_aux_output_begin() again.

Note that pt_event_del() calls pt_event_stop() with PERF_EF_UPDATE flag set
(as is required by the documentation), so a final call to
perf_aux_output_end() is assured.

Fixes: 52ca9ced3f707 ("perf/x86/intel/pt: Add Intel PT PMU driver")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
 arch/x86/events/intel/pt.c | 45 ++++++++++++++++++++++++++++++--------
 1 file changed, 36 insertions(+), 9 deletions(-)

diff --git a/arch/x86/events/intel/pt.c b/arch/x86/events/intel/pt.c
index 2163e5ccdc04..5754cd405562 100644
--- a/arch/x86/events/intel/pt.c
+++ b/arch/x86/events/intel/pt.c
@@ -1540,6 +1540,8 @@ void intel_pt_interrupt(void)
 
 	perf_aux_output_end(&pt->handle, local_xchg(&buf->data_size, 0));
 
+	event->hw.state |= PERF_HES_UPTODATE;
+
 	if (!(event->hw.state & PERF_HES_STOPPED)) {
 		int ret;
 
@@ -1561,6 +1563,8 @@ void intel_pt_interrupt(void)
 
 		pt_config_buffer(buf);
 		pt_config_start(event);
+
+		event->hw.state &= ~PERF_HES_UPTODATE;
 	}
 }
 
@@ -1629,6 +1633,18 @@ static void pt_event_start(struct perf_event *event, int mode)
 		return;
 	}
 
+	/*
+	 * Re-start subsequent to a call to pt_event_stop() without the
+	 * PERF_EF_UPDATE flag. Absence of PERF_HES_UPTODATE indicates that
+	 * perf_aux_output_begin() has already been called. This path can
+	 * come about only in snapshot/overwrite mode - see pt_event_stop().
+	 */
+	if (!(hwc->state & PERF_HES_UPTODATE)) {
+		hwc->state &= ~PERF_HES_STOPPED;
+		pt_config_enable(event);
+		return;
+	}
+
 	buf = perf_aux_output_begin(&pt->handle, event);
 	if (!buf)
 		goto fail_stop;
@@ -1639,7 +1655,7 @@ static void pt_event_start(struct perf_event *event, int mode)
 			goto fail_end_stop;
 	}
 
-	hwc->state &= ~PERF_HES_STOPPED;
+	hwc->state &= ~(PERF_HES_STOPPED | PERF_HES_UPTODATE);
 
 	pt_config_buffer(buf);
 	pt_config(event);
@@ -1649,12 +1665,13 @@ static void pt_event_start(struct perf_event *event, int mode)
 fail_end_stop:
 	perf_aux_output_end(&pt->handle, 0);
 fail_stop:
-	hwc->state |= PERF_HES_STOPPED;
+	hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
 }
 
 static void pt_event_stop(struct perf_event *event, int mode)
 {
 	struct pt *pt = this_cpu_ptr(&pt_ctx);
+	struct pt_buffer *buf;
 
 	if (mode & PERF_EF_PAUSE) {
 		if (READ_ONCE(pt->pause_allowed))
@@ -1680,17 +1697,24 @@ static void pt_event_stop(struct perf_event *event, int mode)
 
 	pt_config_stop(event);
 
-	if (event->hw.state & PERF_HES_STOPPED)
-		return;
-
 	event->hw.state |= PERF_HES_STOPPED;
 
-	if (mode & PERF_EF_UPDATE) {
-		struct pt_buffer *buf = perf_get_aux(&pt->handle);
+	if (event->hw.state & PERF_HES_UPTODATE)
+		return;
 
-		if (!buf)
-			return;
+	buf = perf_get_aux(&pt->handle);
+	if (!buf)
+		return;
 
+	/*
+	 * When not in snapshot/overwrite mode, there is a possibility that the
+	 * buffer has run out of space. The accounting for that is handled by
+	 * the update, so always update in that case. Snapshot/overwrite mode is
+	 * treated differently to allow for pt_event_snapshot_aux() which can
+	 * still get called if the AUX-sampling event is not stopped until after
+	 * PT is stopped.
+	 */
+	if ((mode & PERF_EF_UPDATE) || !buf->snapshot) {
 		if (WARN_ON_ONCE(pt->handle.event != event))
 			return;
 
@@ -1705,6 +1729,7 @@ static void pt_event_stop(struct perf_event *event, int mode)
 				local_xchg(&buf->data_size,
 					   buf->nr_pages << PAGE_SHIFT);
 		perf_aux_output_end(&pt->handle, local_xchg(&buf->data_size, 0));
+		event->hw.state |= PERF_HES_UPTODATE;
 	}
 }
 
@@ -1775,6 +1800,8 @@ static int pt_event_add(struct perf_event *event, int mode)
 	if (pt->handle.event)
 		goto fail;
 
+	event->hw.state |= PERF_HES_UPTODATE;
+
 	if (mode & PERF_EF_START) {
 		pt_event_start(event, 0);
 		ret = -EINVAL;
-- 
2.53.0