lkml.org 
[lkml]   [2026]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] arm64: dts: imx8dxl-evk: Remove unnecessary PCIe EP properties
Date
For PCIe endpoint mode, only M.2 power supply needs to be ensured.
On imx8dxl-evk, the M.2 power is always on and cannot be controlled,
while reg_pcieb only controls the M.2 W_DISABLE1# signal. Remove the
unnecessary vpcie-supply property from pcie0_ep node.

Also remove reset-gpio as PCIe endpoint mode doesn't require reset
control.

Fixes: c1c4820b60d7 ("arm64: dts: imx8dxl-evk: Add pcie0-ep node and use unified pcie0 label")
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
---
arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 2 --
1 file changed, 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
index bc62ae5ca812..441e00903029 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -686,8 +686,6 @@ &pcie0_ep {
phy-names = "pcie-phy";
pinctrl-0 = <&pinctrl_pcieb>;
pinctrl-names = "default";
- reset-gpio = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
- vpcie-supply = <&reg_pcieb>;
status = "disabled";
};

--
2.37.1

\
 
 \ /
  Last update: 2026-05-09 03:53    [W:0.085 / U:0.301 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and my Meterkast|Read the blog