Messages in this thread |  | | Date | Wed, 6 May 2026 11:17:58 +0200 | | Subject | Re: [PATCH v4 3/4] arm64: dts: qcom: monaco: Add monaco-ac EVK board | | From | Konrad Dybcio <> |
| |
On 5/4/26 9:16 PM, Umang Chheda wrote: > > > On 5/4/2026 6:23 PM, Konrad Dybcio wrote: >> On 4/27/26 7:05 PM, Umang Chheda wrote: >>> Add initial device tree support for monaco-ac EVK board, based >>> on Qualcomm's monaco-ac (QCS8300-AC) variant SoC. >> >> [...] >> >> >>> +&apps_rsc { >>> + regulators-0 { >>> + vreg_s4a: smps4 { >>> + regulator-name = "vreg_s4a"; >>> + regulator-min-microvolt = <1800000>; >>> + regulator-max-microvolt = <1800000>; >>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>> + }; >>> + >>> + vreg_s9a: smps9 { >>> + regulator-name = "vreg_s9a"; >>> + regulator-min-microvolt = <1352000>; >>> + regulator-max-microvolt = <1352000>; >>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >>> + }; >> >> Since these are on a PMIC that is present on both full and lite SKUs, >> are these rails also connected on the other one (perhaps with a >> different voltage setting)? Currently they're completely absent > > on the other variant the power-grid is little different and these rails > are not used by any of the consumers on HLOS/APPS side - hence not added.
Alright, thanks for confirming
Konrad
|  |