lkml.org 
[lkml]   [2026]   [May]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] iio: ABI: Add DAC 500ohm, 3.85kohm, and 16kohm powerdown modes
On Tue, 5 May 2026 12:34:31 +0800
Kim Seer Paller <kimseer.paller@analog.com> wrote:

> Add powerdown mode entries for DACs with 500 Ohm, 3.85 kOhm, and
> 16 kOhm resistor to ground output impedance states. These are used
> by the AD3531/AD3531R 4-channel DAC.
>
> Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Applied this one to the testing branch of iio.git.
I'm not bothered if the docs take a while to chase the fix
as not so important to backport given the meaning is obvious enough
and this is really just about completeness.

> ---
> Documentation/ABI/testing/sysfs-bus-iio | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
> index 60dfeff8f2c9..925a33fd309a 100644
> --- a/Documentation/ABI/testing/sysfs-bus-iio
> +++ b/Documentation/ABI/testing/sysfs-bus-iio
> @@ -764,10 +764,13 @@ Contact: linux-iio@vger.kernel.org
> Description:
> Specifies the output powerdown mode.
> DAC output stage is disconnected from the amplifier and
> + 500ohm_to_gnd: connected to ground via a 500Ohm resistor,
> 1kohm_to_gnd: connected to ground via an 1kOhm resistor,
> 2.5kohm_to_gnd: connected to ground via a 2.5kOhm resistor,
> + 3.85kohm_to_gnd: connected to ground via a 3.85kOhm resistor,
> 6kohm_to_gnd: connected to ground via a 6kOhm resistor,
> 7.7kohm_to_gnd: connected to ground via a 7.7kOhm resistor,
> + 16kohm_to_gnd: connected to ground via a 16kOhm resistor,
> 20kohm_to_gnd: connected to ground via a 20kOhm resistor,
> 32kohm_to_gnd: connected to ground via a 32kOhm resistor,
> 42kohm_to_gnd: connected to ground via a 42kOhm resistor,
>


\
 
 \ /
  Last update: 2026-05-06 18:28    [W:0.108 / U:3.099 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and my Meterkast|Read the blog