Messages in this thread |  | | Date | Tue, 5 May 2026 00:46:58 +0530 | | Subject | Re: [PATCH v4 3/4] arm64: dts: qcom: monaco: Add monaco-ac EVK board | | From | Umang Chheda <> |
| |
On 5/4/2026 6:23 PM, Konrad Dybcio wrote: > On 4/27/26 7:05 PM, Umang Chheda wrote: >> Add initial device tree support for monaco-ac EVK board, based >> on Qualcomm's monaco-ac (QCS8300-AC) variant SoC. > > [...] > > >> +&apps_rsc { >> + regulators-0 { >> + vreg_s4a: smps4 { >> + regulator-name = "vreg_s4a"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; >> + >> + vreg_s9a: smps9 { >> + regulator-name = "vreg_s9a"; >> + regulator-min-microvolt = <1352000>; >> + regulator-max-microvolt = <1352000>; >> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; >> + }; > > Since these are on a PMIC that is present on both full and lite SKUs, > are these rails also connected on the other one (perhaps with a > different voltage setting)? Currently they're completely absent
on the other variant the power-grid is little different and these rails are not used by any of the consumers on HLOS/APPS side - hence not added.
> > Konrad
Thanks, Umang
|  |