lkml.org 
[lkml]   [2026]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v4 3/4] arm64: dts: qcom: monaco: Add monaco-ac EVK board
From
On 4/27/26 7:05 PM, Umang Chheda wrote:
> Add initial device tree support for monaco-ac EVK board, based
> on Qualcomm's monaco-ac (QCS8300-AC) variant SoC.

[...]


> +&apps_rsc {
> + regulators-0 {
> + vreg_s4a: smps4 {
> + regulator-name = "vreg_s4a";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_s9a: smps9 {
> + regulator-name = "vreg_s9a";
> + regulator-min-microvolt = <1352000>;
> + regulator-max-microvolt = <1352000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };

Since these are on a PMIC that is present on both full and lite SKUs,
are these rails also connected on the other one (perhaps with a
different voltage setting)? Currently they're completely absent

Konrad

\
 
 \ /
  Last update: 2026-05-04 14:54    [W:0.177 / U:2.195 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and my Meterkast|Read the blog