From: Joshua Crofts <joshua.crofts1@gmail.com>

Replace usleep_range() calls with fsleep(), passing the minimum value
required by the sensor for hardware delays.

fsleep() automatically selects the optimal sleep mechanism, simplifying
driver code and time management.

Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
---
 drivers/iio/magnetometer/ak8975.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/magnetometer/ak8975.c b/drivers/iio/magnetometer/ak8975.c
index dac0a90c33eebd43f8aeed846c9cbf5fd1a6ab91..a84a05a1b64280e26c428e9752a39380e386c234 100644
--- a/drivers/iio/magnetometer/ak8975.c
+++ b/drivers/iio/magnetometer/ak8975.c
@@ -461,7 +461,8 @@ static int ak8975_power_on(const struct ak8975_data *data)
 	 * and the minimum wait time before mode setting is 100us, in
 	 * total 300us. Add some margin and say minimum 500us here.
 	 */
-	usleep_range(500, 1000);
+	fsleep(500);
+
 	return 0;
 }
 
@@ -551,7 +552,7 @@ static int ak8975_set_mode(struct ak8975_data *data, enum ak_ctrl_mode mode)
 
 	data->cntl_cache = regval;
 	/* After mode change wait at least 100us */
-	usleep_range(100, 500);
+	fsleep(100);
 
 	return 0;
 }
-- 
2.47.3