On Tue, May 19, 2026 at 02:56:24AM +0000, Chancel Liu wrote:
> > >>> +description:
> > >>> +  The NXP I/O connector represents a physically present I/O
> > >>> +connector on the
> > >>> +  base board. It acts as a nexus that exposes a constrained set of
> > >>> +I/O
> > >>> +  resources, such as GPIOs, clocks, PWMs and interrupts, through
> > >>> +fixed
> > >>> +  electrical wiring. All actual hardware providers reside on the base
> > board.
> > >>> +  The connector node only defines index-based mappings to those
> > >> providers.
> > >>> +
> > >>> +properties:
> > >>> +  compatible:
> > >>> +    const: fsl,io-connector
> > >>
> > >> Everything is IO. Everything is connector, so your compatible does
> > >> not match requirements from writing bindings.
> > >>
> > >
> > > Yes, this compatible is too generic. I will rename the compatible to
> > > fsl,aud-io-connector.
> > 
> > aud is not much better. Which boards have it? What's the pinout? What's
> > standard? Is it described anywhere? If so, provide reference to spec/docs.
> >
> 
> This is not an industry standard electrical interface. This connector

Then if you do not have standard, then you have board specific layouts
thus you need board-specific compatibles. You can use fallbacks. Generic
fallback could work, but both io-connector and aud-io-connector are just
too generic. Every connector is "connector" and "io", thus absolutely
anything can be "io-connector". "aud" improves it only a bit, thus
honestly I would go with board specific fallback as well.

> is present on i.MX95-19x19-EVK and i.MX952-EVK. For example, the
> "i.MX 95 19mm x 19mm Evaluation Kit" homepage[1] publicly documents an
> audio board connection through which IMX-AUD-IO card is connected. The
> detailed user manual (UM12022) is listed as official documentation[2],
> but it is behind an NXP login, so it is not suitable as a public
> reference for upstream. Therefore I list it here to illustrate it's
> mechanism:
> 
> +-----------------------------+                      
> |        Base Board           |                      
> |   +-----+      +---------+  |           +---------+
> |   | SPI +------+         |  |           |         |
> |   +-----+      |         |  | GPIO MAP  |         |
> |                |         +--|-----------+         |
> |   +-----+      |         |  |           |         |
> |   | I2C +------+         |  |           |         |
> |   +-----+      |         |  | CLOCK MAP |  AUD-IO |
> |                |connector+--|-----------+   CARD  |
> |   +-----+      |         |  |           |         |
> |   | I2S +------+         |  |           |         |
> |   +-----+      |         |  |           |         |
> |                |         |  | INT MAP   |         |
> |   +-----+      |         +--|-----------+         |
> |   | I/O +------+         |  |           |         |
> |   +-----+      +---------+  |           +---------+
> +-----------------------------+                      
> 
> [1]https://www.nxp.com/design/design-center/development-boards-and-designs/IMX95LPD5EVK-19
> [2]https://docs.nxp.com/bundle/UM12022/page/topics/pcie_interface1.html

Best regards,
Krzysztof