Messages in this thread |  | | Date | Thu, 30 Apr 2026 09:27:31 -0700 | | Subject | Re: [PATCH V5 2/2] Add test/daxctl-famfs.sh to test famfs mode transitions: | | From | Dave Jiang <> |
| |
On 4/30/26 8:34 AM, John Groves wrote: > From: John Groves <John@Groves.net> > > - devdax <-> famfs mode switches > - Verify famfs -> system-ram is rejected (must go via devdax) > - Test JSON output shows correct mode > - Test error handling for invalid modes > > Signed-off-by: John Groves <john@groves.net> > --- > test/daxctl-famfs.sh | 253 +++++++++++++++++++++++++++++++++++++++++++ > test/meson.build | 2 + > 2 files changed, 255 insertions(+) > create mode 100755 test/daxctl-famfs.sh > > diff --git a/test/daxctl-famfs.sh b/test/daxctl-famfs.sh > new file mode 100755 > index 0000000..12fbfef > --- /dev/null > +++ b/test/daxctl-famfs.sh > @@ -0,0 +1,253 @@ > +#!/bin/bash -Ex > +# SPDX-License-Identifier: GPL-2.0 > +# Copyright (C) 2025 Micron Technology, Inc. All rights reserved. > +# > +# Test daxctl famfs mode transitions and mode detection > + > +rc=77 > +. $(dirname $0)/common > + > +trap 'cleanup $LINENO' ERR > + > +daxdev="" > +original_mode="" > + > +cleanup() > +{ > + printf "Error at line %d\n" "$1" > + # Try to restore to original mode if we know it > + if [[ $daxdev && $original_mode ]]; then > + "$DAXCTL" reconfigure-device -f -m "$original_mode" "$daxdev" 2>/dev/null || true > + fi > + exit $rc > +} > + > +# Check if fsdev_dax module is available > +check_fsdev_dax() > +{ > + if modinfo fsdev_dax &>/dev/null; then > + return 0 > + fi > + if grep -qF "fsdev_dax" "/lib/modules/$(uname -r)/modules.builtin" 2>/dev/null; then > + return 0 > + fi > + printf "fsdev_dax module not available, skipping\n" > + exit 77 > +} > + > +# Check if kmem module is available (needed for system-ram mode tests) > +check_kmem() > +{ > + if modinfo kmem &>/dev/null; then > + return 0 > + fi > + if grep -qF "kmem" "/lib/modules/$(uname -r)/modules.builtin" 2>/dev/null; then > + return 0 > + fi > + printf "kmem module not available, skipping system-ram tests\n" > + return 1 > +} > + > +# Find an existing dax device to test with > +find_daxdev() > +{ > + # Look for any available dax device > + daxdev=$("$DAXCTL" list | jq -er '.[0].chardev // empty' 2>/dev/null) || true > + > + if [[ ! $daxdev ]]; then > + printf "No dax device found, skipping\n" > + exit 77
Can you use 'do_skip' here?
DJ
> + fi > + > + # Save the original mode so we can restore it > + original_mode=$("$DAXCTL" list -d "$daxdev" | jq -er '.[].mode') > + > + printf "Found dax device: %s (current mode: %s)\n" "$daxdev" "$original_mode" > +} > + > +daxctl_get_mode() > +{ > + "$DAXCTL" list -d "$1" | jq -er '.[].mode' > +} > + > +# Ensure device is in devdax mode for testing > +ensure_devdax_mode() > +{ > + local mode > + mode=$(daxctl_get_mode "$daxdev") > + > + if [[ "$mode" == "devdax" ]]; then > + return 0 > + fi > + > + if [[ "$mode" == "system-ram" ]]; then > + printf "Device is in system-ram mode, attempting to convert to devdax...\n" > + "$DAXCTL" reconfigure-device -f -m devdax "$daxdev" > + elif [[ "$mode" == "famfs" ]]; then > + printf "Device is in famfs mode, converting to devdax...\n" > + "$DAXCTL" reconfigure-device -m devdax "$daxdev" > + else > + printf "Device is in unknown mode: %s\n" "$mode" > + return 1 > + fi > + > + [[ $(daxctl_get_mode "$daxdev") == "devdax" ]] > +} > + > +# > +# Test basic mode transitions involving famfs > +# > +test_famfs_mode_transitions() > +{ > + printf "\n=== Testing famfs mode transitions ===\n" > + > + # Ensure starting in devdax mode > + ensure_devdax_mode > + [[ $(daxctl_get_mode "$daxdev") == "devdax" ]] > + printf "Initial mode: devdax - OK\n" > + > + # Test: devdax -> famfs > + printf "Testing devdax -> famfs... " > + "$DAXCTL" reconfigure-device -m famfs "$daxdev" > + [[ $(daxctl_get_mode "$daxdev") == "famfs" ]] > + printf "OK\n" > + > + # Test: famfs -> famfs (re-enable in same mode) > + printf "Testing famfs -> famfs (re-enable)... " > + "$DAXCTL" reconfigure-device -m famfs "$daxdev" > + [[ $(daxctl_get_mode "$daxdev") == "famfs" ]] > + printf "OK\n" > + > + # Test: famfs -> devdax > + printf "Testing famfs -> devdax... " > + "$DAXCTL" reconfigure-device -m devdax "$daxdev" > + [[ $(daxctl_get_mode "$daxdev") == "devdax" ]] > + printf "OK\n" > + > + # Test: devdax -> devdax (re-enable in same mode) > + printf "Testing devdax -> devdax (re-enable)... " > + "$DAXCTL" reconfigure-device -m devdax "$daxdev" > + [[ $(daxctl_get_mode "$daxdev") == "devdax" ]] > + printf "OK\n" > +} > + > +# > +# Test mode transitions with system-ram (requires kmem) > +# > +test_system_ram_transitions() > +{ > + printf "\n=== Testing system-ram transitions with famfs ===\n" > + > + # Ensure we start in devdax mode > + ensure_devdax_mode > + [[ $(daxctl_get_mode "$daxdev") == "devdax" ]] > + > + # Test: devdax -> system-ram > + printf "Testing devdax -> system-ram... " > + "$DAXCTL" reconfigure-device -N -m system-ram "$daxdev" > + [[ $(daxctl_get_mode "$daxdev") == "system-ram" ]] > + printf "OK\n" > + > + # Test: system-ram -> famfs should fail > + printf "Testing system-ram -> famfs (should fail)... " > + if "$DAXCTL" reconfigure-device -m famfs "$daxdev" 2>/dev/null; then > + printf "FAILED - should have been rejected\n" > + return 1 > + fi > + printf "OK (correctly rejected)\n" > + > + # Test: system-ram -> devdax -> famfs (proper path) > + printf "Testing system-ram -> devdax -> famfs... " > + "$DAXCTL" reconfigure-device -f -m devdax "$daxdev" > + [[ $(daxctl_get_mode "$daxdev") == "devdax" ]] > + "$DAXCTL" reconfigure-device -m famfs "$daxdev" > + [[ $(daxctl_get_mode "$daxdev") == "famfs" ]] > + printf "OK\n" > + > + # Restore to devdax for subsequent tests > + "$DAXCTL" reconfigure-device -m devdax "$daxdev" > +} > + > +# > +# Test JSON output shows correct mode > +# > +test_json_output() > +{ > + printf "\n=== Testing JSON output for mode field ===\n" > + > + # Test devdax mode in JSON > + ensure_devdax_mode > + printf "Testing JSON output for devdax mode... " > + mode=$("$DAXCTL" list -d "$daxdev" | jq -er '.[].mode') > + [[ "$mode" == "devdax" ]] > + printf "OK\n" > + > + # Test famfs mode in JSON > + "$DAXCTL" reconfigure-device -m famfs "$daxdev" > + printf "Testing JSON output for famfs mode... " > + mode=$("$DAXCTL" list -d "$daxdev" | jq -er '.[].mode') > + [[ "$mode" == "famfs" ]] > + printf "OK\n" > + > + # Restore to devdax > + "$DAXCTL" reconfigure-device -m devdax "$daxdev" > +} > + > +# > +# Test error messages for invalid transitions > +# > +test_error_handling() > +{ > + printf "\n=== Testing error handling ===\n" > + > + # Ensure we're in famfs mode > + "$DAXCTL" reconfigure-device -m famfs "$daxdev" > + > + # Test that invalid mode is rejected > + printf "Testing invalid mode rejection... " > + if "$DAXCTL" reconfigure-device -m invalidmode "$daxdev" 2>/dev/null; then > + printf "FAILED - invalid mode should be rejected\n" > + return 1 > + fi > + printf "OK (correctly rejected)\n" > + > + # Restore to devdax > + "$DAXCTL" reconfigure-device -m devdax "$daxdev" > +} > + > +# > +# Main test sequence > +# > +main() > +{ > + check_fsdev_dax > + find_daxdev > + > + rc=1 # From here on, failures are real failures > + > + test_famfs_mode_transitions > + test_json_output > + test_error_handling > + > + # System-ram tests require kmem module > + if check_kmem; then > + # Save and disable online policy for system-ram tests > + saved_policy="$(cat /sys/devices/system/memory/auto_online_blocks)" > + echo "offline" > /sys/devices/system/memory/auto_online_blocks > + > + test_system_ram_transitions > + > + # Restore online policy > + echo "$saved_policy" > /sys/devices/system/memory/auto_online_blocks > + fi > + > + # Restore original mode > + printf "\nRestoring device to original mode: %s\n" "$original_mode" > + "$DAXCTL" reconfigure-device -f -m "$original_mode" "$daxdev" > + > + printf "\n=== All famfs tests passed ===\n" > + > + exit 0 > +} > + > +main > diff --git a/test/meson.build b/test/meson.build > index 8a3718d..5b75c07 100644 > --- a/test/meson.build > +++ b/test/meson.build > @@ -213,6 +213,7 @@ if get_option('destructive').enabled() > device_dax_fio = find_program('device-dax-fio.sh') > daxctl_devices = find_program('daxctl-devices.sh') > daxctl_create = find_program('daxctl-create.sh') > + daxctl_famfs = find_program('daxctl-famfs.sh') > dm = find_program('dm.sh') > mmap_test = find_program('mmap.sh') > > @@ -230,6 +231,7 @@ if get_option('destructive').enabled() > [ 'device-dax-fio.sh', device_dax_fio, 'dax' ], > [ 'daxctl-devices.sh', daxctl_devices, 'dax' ], > [ 'daxctl-create.sh', daxctl_create, 'dax' ], > + [ 'daxctl-famfs.sh', daxctl_famfs, 'dax' ], > [ 'dm.sh', dm, 'dax' ], > [ 'mmap.sh', mmap_test, 'dax' ], > ]
|  |