Messages in this thread |  | | Date | Tue, 3 Mar 2026 16:54:53 +0000 | | From | Jonathan Cameron <> | | Subject | Re: [RFC v3 24/27] lib: rspdm: Support SPDM challenge |
| |
On Wed, 11 Feb 2026 13:29:31 +1000 alistair23@gmail.com wrote:
> From: Alistair Francis <alistair@alistair23.me> > > Support the CHALLENGE SPDM command. > > Signed-off-by: Alistair Francis <alistair@alistair23.me>
Nicely broken out. I was wondering when the transcript for the hash might show up, but you sensibly kept that delight for only being done when you need it. Might be worth talking a bit more about that in the patch description!
Minor comments inline.
J
> diff --git a/lib/rspdm/state.rs b/lib/rspdm/state.rs > index 728b920beace..a4d803af48fe 100644 > --- a/lib/rspdm/state.rs > +++ b/lib/rspdm/state.rs
...
> @@ -834,4 +877,165 @@ pub(crate) fn validate_cert_chain(&mut self, slot: u8) -> Result<(), Error> { > > Ok(()) > } > + > + pub(crate) fn challenge_rsp_len(&mut self, nonce_len: usize, opaque_len: usize) -> usize { > + let mut length = > + core::mem::size_of::<SpdmHeader>() + self.hash_len + nonce_len + opaque_len + 2;
As below, perhaps add a comment at least that MSHLength == 0
> + > + if self.version >= 0x13 { > + length += 8; > + } > + > + length + self.sig_len > + } > + > + fn verify_signature(&mut self, response_vec: &mut [u8]) -> Result<(), Error> { > + let sig_start = response_vec.len() - self.sig_len; > + let mut sig = bindings::public_key_signature::default(); > + let mut mhash: KVec<u8> = KVec::new(); > + > + sig.s = &mut response_vec[sig_start..] as *mut _ as *mut u8; > + sig.s_size = self.sig_len as u32;
Perhaps it makes sense to extract the signature at the caller and only pass that in here rather than the whole response_vec.
> + sig.encoding = self.base_asym_enc.as_ptr() as *const u8; > + sig.hash_algo = self.base_hash_alg_name.as_ptr() as *const u8; > + ...
> + pub(crate) fn challenge(&mut self, slot: u8, verify: bool) -> Result<(), Error> { > + let mut request = ChallengeReq::default(); > + request.version = self.version; > + request.param1 = slot; > + > + let nonce_len = request.nonce.len(); > + > + if let Some(nonce) = &self.next_nonce { > + request.nonce.copy_from_slice(&nonce); > + self.next_nonce = None; > + } else { > + unsafe { > + bindings::get_random_bytes(&mut request.nonce as *mut _ as *mut c_void, nonce_len) > + }; > + } > + > + let req_sz = if self.version <= 0x12 { > + core::mem::size_of::<ChallengeReq>() - 8
No means to do offset_of type stuff in Rust? Would make the sizing explicitly reflect the structure.
> + } else { > + core::mem::size_of::<ChallengeReq>() > + }; > + > + let rsp_sz = self.challenge_rsp_len(nonce_len, SPDM_MAX_OPAQUE_DATA); > + > + // SAFETY: `request` is repr(C) and packed, so we can convert it to a slice > + let request_buf = unsafe { from_raw_parts_mut(&mut request as *mut _ as *mut u8, req_sz) }; > + > + let mut response_vec: KVec<u8> = KVec::with_capacity(rsp_sz, GFP_KERNEL)?; > + // SAFETY: `request` is repr(C) and packed, so we can convert it to a slice > + let response_buf = unsafe { from_raw_parts_mut(response_vec.as_mut_ptr(), rsp_sz) }; > + > + let rc = self.spdm_exchange(request_buf, response_buf)?; > + > + if rc < (core::mem::size_of::<ChallengeRsp>() as i32) { > + pr_err!("Truncated challenge response\n"); > + to_result(-(bindings::EIO as i32))?; > + } > + > + // SAFETY: `rc` is the length of data read, which will be smaller > + // then the capacity of the vector > + unsafe { response_vec.inc_len(rc as usize) }; > + > + let _response: &mut ChallengeRsp = Untrusted::new_mut(&mut response_vec).validate_mut()?; > + > + let opaque_len_offset = core::mem::size_of::<SpdmHeader>() + self.hash_len + nonce_len;
Might be worth adding something to reflect that this also includes the MSHLength but that is 0 as we didn't ask for a measurement summary hash. Would make it a tiny bit easier to correlate with the spec.
> + let opaque_len = u16::from_le_bytes( > + response_vec[opaque_len_offset..(opaque_len_offset + 2)] > + .try_into() > + .unwrap_or([0, 0]), > + ); > + > + let rsp_sz = self.challenge_rsp_len(nonce_len, opaque_len as usize); > + > + if rc < rsp_sz as i32 { > + pr_err!("Truncated challenge response\n"); > + to_result(-(bindings::EIO as i32))?; > + } > + > + self.transcript > + .extend_from_slice(&response_vec[..rsp_sz], GFP_KERNEL)?; > + > + if verify { > + /* Verify signature at end of transcript against leaf key */ > + match self.verify_signature(&mut response_vec[..rsp_sz]) { > + Ok(()) => { > + pr_info!("Authenticated with certificate slot {slot}"); > + self.authenticated = true; > + } > + Err(e) => { > + pr_err!("Cannot verify challenge_auth signature: {e:?}"); > + self.authenticated = false; > + } > + }; > + } > + > + Ok(()) > + } > } > diff --git a/lib/rspdm/validator.rs b/lib/rspdm/validator.rs > index a8bc3378676f..f8a5337841f0 100644 > --- a/lib/rspdm/validator.rs > +++ b/lib/rspdm/validator.rs
> + > +#[repr(C, packed)] > +pub(crate) struct ChallengeRsp { > + pub(crate) version: u8, > + pub(crate) code: u8, > + pub(crate) param1: u8, > + pub(crate) param2: u8, > + > + pub(crate) cert_chain_hash: __IncompleteArrayField<u8>, > + pub(crate) nonce: [u8; 32], > + pub(crate) message_summary_hash: __IncompleteArrayField<u8>, > + > + pub(crate) opaque_data_len: u16, Similar to other places, I'd use a __le16 and convert at place of use only.
> + pub(crate) opaque_data: __IncompleteArrayField<u8>, > + > + pub(crate) context: [u8; 8], > + pub(crate) signature: __IncompleteArrayField<u8>, > +} > + > +impl Validate<&mut Unvalidated<KVec<u8>>> for &mut ChallengeRsp { > + type Err = Error; > + > + fn validate(unvalidated: &mut Unvalidated<KVec<u8>>) -> Result<Self, Self::Err> { > + let raw = unvalidated.raw_mut(); > + if raw.len() < mem::size_of::<ChallengeRsp>() { > + return Err(EINVAL); > + } > + > + let ptr = raw.as_mut_ptr(); > + // CAST: `ChallengeRsp` only contains integers and has `repr(C)`. > + let ptr = ptr.cast::<ChallengeRsp>(); > + // SAFETY: `ptr` came from a reference and the cast above is valid. > + let rsp: &mut ChallengeRsp = unsafe { &mut *ptr }; > + > + // rsp.opaque_data_len = rsp.opaque_data_len.to_le(); Not sure why this is commented out. But as above, I'd leave it alone anyway.
> + > + Ok(rsp) > + } > +}
|  |